diff --git a/Libs/Test1Romain.txt b/Libs/Test1Romain.txt
deleted file mode 100644
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..0000000000000000000000000000000000000000
diff --git a/Libs/libroxml b/Libs/libroxml
deleted file mode 160000
index 1bc90ac506b50a06ee613b139405ff47ecc83c0a..0000000000000000000000000000000000000000
--- a/Libs/libroxml
+++ /dev/null
@@ -1 +0,0 @@
-Subproject commit 1bc90ac506b50a06ee613b139405ff47ecc83c0a
diff --git a/Libs/libroxml-2.3.0/CMakeLists.txt b/Libs/libroxml-2.3.0/CMakeLists.txt
new file mode 100644
index 0000000000000000000000000000000000000000..d26c12df55bd16e5d74c95ca34f881875d44a5bb
--- /dev/null
+++ b/Libs/libroxml-2.3.0/CMakeLists.txt
@@ -0,0 +1,66 @@
+cmake_minimum_required (VERSION 2.6)
+
+project (roxml)
+
+set (VERSION "2")
+set (SOVERSION "2.3.0")
+
+set (TOPDIR "")
+
+include_directories( "${PROJECT_SOURCE_DIR}/${TOPDIR}inc" )
+
+add_definitions (-DIGNORE_EMPTY_TEXT_NODES)
+
+add_library(roxml-dynamic SHARED
+		${TOPDIR}src/roxml.c
+		${TOPDIR}src/roxml-internal.c
+		${TOPDIR}src/roxml-parse-engine.c
+		${TOPDIR}src/roxml.h
+		${TOPDIR}src/roxml-defines.h
+		${TOPDIR}src/roxml-internal.h
+		${TOPDIR}src/roxml-parse-engine.h
+		${TOPDIR}src/roxml-types.h
+		${TOPDIR}src/roxml-tune.h
+		${TOPDIR}src/roxml-win32-native.h
+		)
+		
+add_library(roxml-static STATIC
+		${TOPDIR}src/roxml.c
+		${TOPDIR}src/roxml-internal.c
+		${TOPDIR}src/roxml-parse-engine.c
+		${TOPDIR}src/roxml.h
+		${TOPDIR}src/roxml-defines.h
+		${TOPDIR}src/roxml-internal.h
+		${TOPDIR}src/roxml-parse-engine.h
+		${TOPDIR}src/roxml-types.h
+		${TOPDIR}src/roxml-tune.h
+		${TOPDIR}src/roxml-win32-native.h
+		)
+		
+add_executable(roxml-tool
+		${TOPDIR}src/roxml-parser.c
+		)
+
+target_link_libraries(roxml-tool roxml-dynamic)
+
+set_target_properties (roxml-dynamic 
+	PROPERTIES 
+		OUTPUT_NAME roxml 
+		SOVERSION ${SOVERSION} 
+		VERSION ${VERSION}
+	)
+	
+set_target_properties (roxml-static 
+	PROPERTIES 
+		OUTPUT_NAME roxml
+	)
+	
+set_target_properties (roxml-tool 
+	PROPERTIES 
+		OUTPUT_NAME roxml
+	)
+
+install (TARGETS roxml-dynamic roxml-static DESTINATION lib/)
+install (TARGETS roxml-tool DESTINATION bin/)
+install (FILES "${TOPDIR}src/roxml.h" DESTINATION include/)
+
diff --git a/Libs/libroxml-2.3.0/License.txt b/Libs/libroxml-2.3.0/License.txt
new file mode 100644
index 0000000000000000000000000000000000000000..f1481181c9c1709b4fdb92533be1b6bf0724418e
--- /dev/null
+++ b/Libs/libroxml-2.3.0/License.txt
@@ -0,0 +1,477 @@
+As a special exception to the LGPL v2.1 (below), the copyright holders of
+this library give you permission to statically link this library
+with independent modules to produce an executable, regardless of the license
+terms of these independent modules, and to copy and distribute the resulting
+executable under terms of your choice, provided that you also meet, for each
+linked independent module, the terms and conditions of the license of that
+module. The resulting executable may therefore be distributed without complying
+with the LGPL terms that state that recipients of your executable must be able
+to relink against modified versions of the library.
+
+It is also appreciated if you mention in the README or CREDITS the use of
+this library.
+
+An independent module is a module which is not derived from or based on
+this library.  If you modify this library, you may extend this exception
+to your version of the library, but you are not obligated to do so.
+If you do not wish to do so, delete this exception statement from your version.
+
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
diff --git a/Libs/libroxml-2.3.0/Makefile.am b/Libs/libroxml-2.3.0/Makefile.am
new file mode 100644
index 0000000000000000000000000000000000000000..cd875b0160dda43763ae4cd00fbab758e339abd8
--- /dev/null
+++ b/Libs/libroxml-2.3.0/Makefile.am
@@ -0,0 +1,194 @@
+## Process this file with automake to generate Makefile.in
+
+VERSION_INFO = -version-info $(SONAME_CURRENT):$(SONAME_REVISION):$(SONAME_AGE)
+
+if DEBUG
+  DEBUG_CFLAGS = -DDEBUG
+endif
+
+AUTOMAKE_OPTIONS = foreign nostdinc
+ACLOCAL_AMFLAGS = -I m4
+AM_CPPFLAGS = -I$(top_srcdir)/src -I$(top_builddir)/src
+AM_LD = $(CC)
+AM_CFLAGS = -Wall $(DEBUG_CFLAGS)
+EXTRA_DIST =
+CLEANFILES =
+
+# Project headers
+include_HEADERS = src/roxml.h
+noinst_HEADERS = \
+	src/roxml-defines.h \
+	src/roxml-internal.h \
+	src/roxml-parse-engine.h \
+	src/roxml-tune.h \
+	src/roxml-types.h \
+	src/roxml-win32-native.h
+EXTRA_DIST += src/roxml-doxy.h.in
+
+# Libraries
+lib_LTLIBRARIES = libroxml.la
+
+# The libroxml library
+libroxml_la_SOURCES = \
+	src/roxml.c \
+	src/roxml-internal.c \
+	src/roxml-parse-engine.c
+libroxml_la_LDFLAGS = $(VERSION_INFO)
+
+bin_PROGRAMS =
+
+# The roxml utility
+if ENABLE_ROXML
+  bin_PROGRAMS += roxml
+  roxml_SOURCES = src/roxml-parser.c
+  roxml_LDADD = libroxml.la
+endif
+
+# mount.fuse.xml helper
+if WITH_FUSE
+  bin_PROGRAMS += mount.fuse.xml
+  mount_fuse_xml_SOURCES = fuse.xml/xmlfs.c
+  mount_fuse_xml_CFLAGS = -D_FILE_OFFSET_BITS=64 $(FUSE_CFLAGS)
+  mount_fuse_xml_LDADD = libroxml.la $(FUSE_LIBS)
+endif
+EXTRA_DIST += fuse.xml/README
+
+# pkg-config .pc file
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libroxml.pc
+EXTRA_DIST += libroxml.pc.in
+
+# Additional project files
+EXTRA_DIST += \
+	License.txt \
+	CMakeLists.txt
+
+# Documentation
+EXTRA_DIST += \
+	data/html \
+	data/icons \
+	docs
+
+if DOCS
+docs: doxygen-docs
+doxygen-docs: doxygen-html doxygen-man
+
+doxygen-html:
+	$(AM_V_GEN)$(DOXYGEN) docs/doxy.cfg >/dev/null 2>&1
+	$(AM_V_GEN)cp $(top_srcdir)/data/icons/roxml.png docs/html/
+	$(AM_V_GEN)cp $(top_srcdir)/data/icons/libroxml-ex.png docs/html/
+
+doxygen-man:
+	$(AM_V_GEN)$(DOXYGEN) docs/man.cfg >/dev/null 2>&1
+	$(AM_V_GEN)chmod -R a+rw docs
+
+clean-local: docs-clean
+docs-clean:
+	rm -Rf \
+	docs/man \
+	docs/html \
+	docs/latex
+
+man1_MANS = $(top_srcdir)/docs/roxml.1
+nodist_man3_MANS = docs/man/man3/*.3
+
+nodist_html_DATA = docs/html/*
+
+$(man1_MANS): docs
+$(nodist_man3_MANS): docs
+$(nodist_html_DATA): docs
+
+endif
+
+# Unit tests
+
+if ENABLE_TESTS
+
+noinst_bin_PROGRAMS = \
+	unittest/roxml.unitC \
+	unittest/roxml.perf \
+	unittest/roxml.mem \
+	unittest/roxml.tiny.unitC
+noinst_bindir = unittest
+
+nodist_noinst_HEADERS = unittest/unittest.h
+
+# Test libraries
+noinst_LIBRARIES = \
+		unittest/libroxml_test.a \
+		unittest/libroxml_test_tiny.a
+
+TEST_CFLAGS = -DUNITTEST -DREENTRANT -DLINUX -D__DEBUG -DIGNORE_EMPTY_TEXT_NODES -Wall -Wextra @AM_TEST_CFLAGS@
+
+# Test library libroxml_test.a
+unittest_libroxml_test_a_SOURCES = \
+	src/roxml.c \
+	src/roxml-internal.c \
+	src/roxml-parse-engine.c
+unittest_libroxml_test_a_CFLAGS = $(TEST_CFLAGS)
+
+# Test library libroxml_test_tiny.a
+unittest_libroxml_test_tiny_a_SOURCES = \
+	src/roxml.c \
+	src/roxml-internal.c \
+	src/roxml-parse-engine.c
+unittest_libroxml_test_tiny_a_CFLAGS = \
+	$(TEST_CFLAGS) \
+	-UHAVE_CONFIG_H \
+	-DCONFIG_XML_HEAP_BUFFERS=1 \
+	-DCONFIG_XML_SMALL_BUFFER=1 \
+	-DCONFIG_XML_SMALL_INPUT_FILE=1 \
+	-DCONFIG_XML_THREAD_SAFE=0 \
+	-DCONFIG_XML_READ_WRITE=0 \
+	-DCONFIG_XML_COMMIT_XML_TREE=0 \
+	-DCONFIG_XML_XPATH_ENGINE=0
+
+# roxml.unitC
+nodist_unittest_roxml_unitC_SOURCES = \
+	unittest/unittest.c \
+	unittest/roxml.test.c
+unittest_roxml_unitC_LDADD = unittest/libroxml_test.a
+unittest_roxml_unitC_CFLAGS = $(TEST_CFLAGS)
+
+# roxml.perf
+nodist_unittest_roxml_perf_SOURCES = \
+	unittest/roxml.perf.c
+unittest_roxml_perf_LDADD = unittest/libroxml_test.a
+unittest_roxml_perf_CFLAGS = -O3 -DREENTRANT -DLINUX -DIGNORE_EMPTY_TEXT_NODES -Wall
+
+# roxml.mem
+nodist_unittest_roxml_mem_SOURCES = unittest/roxml.mem.c
+unittest_roxml_mem_LDADD = unittest/libroxml_test.a
+unittest_roxml_mem_CFLAGS = $(TEST_CFLAGS)
+
+# roxml.tiny.unitC
+nodist_unittest_roxml_tiny_unitC_SOURCES = unittest/unittest.c
+unittest_roxml_tiny_unitC_LDADD = unittest/libroxml_test_tiny.a
+unittest_roxml_tiny_unitC_CFLAGS = $(TEST_CFLAGS)
+
+CLEANFILES += \
+		unittest/out.xml.copy \
+		unittest/out.xml out.xml.human \
+		unittest/out.xml.spec.copy \
+		unittest/out.xml.valid.human \
+		unittest/out.buf.xml \
+		unittest/out.buf.xml.human \
+		unittest/out.xml.ns.generated \
+		unittest/out.xml.ns \
+		unittest/out.xml.human.sub \
+		unittest/out.xml.ns.del \
+		unittest/out.xml.modattr \
+		unittest/out.xml.modattr2 \
+		unittest/out.xml.modattr3 \
+		unittest/out.xml.modattr4 \
+		unittest/out.xml.ns.generated2 \
+		unittest/out.xml.valid.raw \
+		unittest/out.xml.valid.raw2 \
+		unittest/out.xml.valid.raw3 \
+		unittest/out.xml.valid.raw4 \
+		unittest/out.xml.valid.xpath \
+		unittest/out.xml.valid.xpath2 \
+		unittest/out.xml.valid.xpath3 \
+		unittest/out.xml.valid.xpath4
+
+endif
diff --git a/Libs/libroxml-2.3.0/Makefile.in b/Libs/libroxml-2.3.0/Makefile.in
new file mode 100644
index 0000000000000000000000000000000000000000..a93fe071291e941333de187a4d57aa7e8c9a64cf
--- /dev/null
+++ b/Libs/libroxml-2.3.0/Makefile.in
@@ -0,0 +1,1663 @@
+# Makefile.in generated by automake 1.14 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2)
+
+# The roxml utility
+@ENABLE_ROXML_TRUE@am__append_1 = roxml
+
+# mount.fuse.xml helper
+@WITH_FUSE_TRUE@am__append_2 = mount.fuse.xml
+@ENABLE_TESTS_TRUE@noinst_bin_PROGRAMS =  \
+@ENABLE_TESTS_TRUE@	unittest/roxml.unitC$(EXEEXT) \
+@ENABLE_TESTS_TRUE@	unittest/roxml.perf$(EXEEXT) \
+@ENABLE_TESTS_TRUE@	unittest/roxml.mem$(EXEEXT) \
+@ENABLE_TESTS_TRUE@	unittest/roxml.tiny.unitC$(EXEEXT)
+@ENABLE_TESTS_TRUE@am__append_3 = \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.copy \
+@ENABLE_TESTS_TRUE@		unittest/out.xml out.xml.human \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.spec.copy \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.human \
+@ENABLE_TESTS_TRUE@		unittest/out.buf.xml \
+@ENABLE_TESTS_TRUE@		unittest/out.buf.xml.human \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.ns.generated \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.ns \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.human.sub \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.ns.del \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.modattr \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.modattr2 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.modattr3 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.modattr4 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.ns.generated2 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.raw \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.raw2 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.raw3 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.raw4 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.xpath \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.xpath2 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.xpath3 \
+@ENABLE_TESTS_TRUE@		unittest/out.xml.valid.xpath4
+
+subdir = .
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(top_srcdir)/src/config.h.in $(srcdir)/libroxml.pc.in \
+	$(top_srcdir)/docs/doxy.cfg.in $(top_srcdir)/docs/man.cfg.in \
+	$(top_srcdir)/src/roxml-doxy.h.in \
+	$(top_srcdir)/aux_scripts/depcomp $(include_HEADERS) \
+	$(noinst_HEADERS) aux_scripts/compile aux_scripts/config.guess \
+	aux_scripts/config.sub aux_scripts/depcomp \
+	aux_scripts/install-sh aux_scripts/missing \
+	aux_scripts/ltmain.sh $(top_srcdir)/aux_scripts/compile \
+	$(top_srcdir)/aux_scripts/config.guess \
+	$(top_srcdir)/aux_scripts/config.sub \
+	$(top_srcdir)/aux_scripts/install-sh \
+	$(top_srcdir)/aux_scripts/ltmain.sh \
+	$(top_srcdir)/aux_scripts/missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES = libroxml.pc docs/doxy.cfg docs/man.cfg \
+	src/roxml-doxy.h
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+unittest_libroxml_test_a_AR = $(AR) $(ARFLAGS)
+unittest_libroxml_test_a_LIBADD =
+am__unittest_libroxml_test_a_SOURCES_DIST = src/roxml.c \
+	src/roxml-internal.c src/roxml-parse-engine.c
+am__dirstamp = $(am__leading_dot)dirstamp
+@ENABLE_TESTS_TRUE@am_unittest_libroxml_test_a_OBJECTS = src/unittest_libroxml_test_a-roxml.$(OBJEXT) \
+@ENABLE_TESTS_TRUE@	src/unittest_libroxml_test_a-roxml-internal.$(OBJEXT) \
+@ENABLE_TESTS_TRUE@	src/unittest_libroxml_test_a-roxml-parse-engine.$(OBJEXT)
+unittest_libroxml_test_a_OBJECTS =  \
+	$(am_unittest_libroxml_test_a_OBJECTS)
+unittest_libroxml_test_tiny_a_AR = $(AR) $(ARFLAGS)
+unittest_libroxml_test_tiny_a_LIBADD =
+am__unittest_libroxml_test_tiny_a_SOURCES_DIST = src/roxml.c \
+	src/roxml-internal.c src/roxml-parse-engine.c
+@ENABLE_TESTS_TRUE@am_unittest_libroxml_test_tiny_a_OBJECTS = src/unittest_libroxml_test_tiny_a-roxml.$(OBJEXT) \
+@ENABLE_TESTS_TRUE@	src/unittest_libroxml_test_tiny_a-roxml-internal.$(OBJEXT) \
+@ENABLE_TESTS_TRUE@	src/unittest_libroxml_test_tiny_a-roxml-parse-engine.$(OBJEXT)
+unittest_libroxml_test_tiny_a_OBJECTS =  \
+	$(am_unittest_libroxml_test_tiny_a_OBJECTS)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(noinst_bindir)" "$(DESTDIR)$(man1dir)" \
+	"$(DESTDIR)$(man3dir)" "$(DESTDIR)$(htmldir)" \
+	"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libroxml_la_LIBADD =
+am_libroxml_la_OBJECTS = src/roxml.lo src/roxml-internal.lo \
+	src/roxml-parse-engine.lo
+libroxml_la_OBJECTS = $(am_libroxml_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libroxml_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libroxml_la_LDFLAGS) $(LDFLAGS) -o $@
+@ENABLE_ROXML_TRUE@am__EXEEXT_1 = roxml$(EXEEXT)
+@WITH_FUSE_TRUE@am__EXEEXT_2 = mount.fuse.xml$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_bin_PROGRAMS)
+am__mount_fuse_xml_SOURCES_DIST = fuse.xml/xmlfs.c
+@WITH_FUSE_TRUE@am_mount_fuse_xml_OBJECTS =  \
+@WITH_FUSE_TRUE@	fuse.xml/mount_fuse_xml-xmlfs.$(OBJEXT)
+mount_fuse_xml_OBJECTS = $(am_mount_fuse_xml_OBJECTS)
+am__DEPENDENCIES_1 =
+@WITH_FUSE_TRUE@mount_fuse_xml_DEPENDENCIES = libroxml.la \
+@WITH_FUSE_TRUE@	$(am__DEPENDENCIES_1)
+mount_fuse_xml_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(mount_fuse_xml_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o \
+	$@
+am__roxml_SOURCES_DIST = src/roxml-parser.c
+@ENABLE_ROXML_TRUE@am_roxml_OBJECTS = src/roxml-parser.$(OBJEXT)
+roxml_OBJECTS = $(am_roxml_OBJECTS)
+@ENABLE_ROXML_TRUE@roxml_DEPENDENCIES = libroxml.la
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_mem_OBJECTS = unittest/unittest_roxml_mem-roxml.mem.$(OBJEXT)
+unittest_roxml_mem_OBJECTS = $(nodist_unittest_roxml_mem_OBJECTS)
+@ENABLE_TESTS_TRUE@unittest_roxml_mem_DEPENDENCIES =  \
+@ENABLE_TESTS_TRUE@	unittest/libroxml_test.a
+unittest_roxml_mem_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(unittest_roxml_mem_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_perf_OBJECTS = unittest/unittest_roxml_perf-roxml.perf.$(OBJEXT)
+unittest_roxml_perf_OBJECTS = $(nodist_unittest_roxml_perf_OBJECTS)
+@ENABLE_TESTS_TRUE@unittest_roxml_perf_DEPENDENCIES =  \
+@ENABLE_TESTS_TRUE@	unittest/libroxml_test.a
+unittest_roxml_perf_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(unittest_roxml_perf_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_tiny_unitC_OBJECTS = unittest/unittest_roxml_tiny_unitC-unittest.$(OBJEXT)
+unittest_roxml_tiny_unitC_OBJECTS =  \
+	$(nodist_unittest_roxml_tiny_unitC_OBJECTS)
+@ENABLE_TESTS_TRUE@unittest_roxml_tiny_unitC_DEPENDENCIES =  \
+@ENABLE_TESTS_TRUE@	unittest/libroxml_test_tiny.a
+unittest_roxml_tiny_unitC_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(unittest_roxml_tiny_unitC_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_unitC_OBJECTS = unittest/unittest_roxml_unitC-unittest.$(OBJEXT) \
+@ENABLE_TESTS_TRUE@	unittest/unittest_roxml_unitC-roxml.test.$(OBJEXT)
+unittest_roxml_unitC_OBJECTS = $(nodist_unittest_roxml_unitC_OBJECTS)
+@ENABLE_TESTS_TRUE@unittest_roxml_unitC_DEPENDENCIES =  \
+@ENABLE_TESTS_TRUE@	unittest/libroxml_test.a
+unittest_roxml_unitC_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(unittest_roxml_unitC_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/aux_scripts/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(unittest_libroxml_test_a_SOURCES) \
+	$(unittest_libroxml_test_tiny_a_SOURCES) \
+	$(libroxml_la_SOURCES) $(mount_fuse_xml_SOURCES) \
+	$(roxml_SOURCES) $(nodist_unittest_roxml_mem_SOURCES) \
+	$(nodist_unittest_roxml_perf_SOURCES) \
+	$(nodist_unittest_roxml_tiny_unitC_SOURCES) \
+	$(nodist_unittest_roxml_unitC_SOURCES)
+DIST_SOURCES = $(am__unittest_libroxml_test_a_SOURCES_DIST) \
+	$(am__unittest_libroxml_test_tiny_a_SOURCES_DIST) \
+	$(libroxml_la_SOURCES) $(am__mount_fuse_xml_SOURCES_DIST) \
+	$(am__roxml_SOURCES_DIST)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+man1dir = $(mandir)/man1
+man3dir = $(mandir)/man3
+NROFF = nroff
+MANS = $(man1_MANS) $(nodist_man3_MANS)
+DATA = $(nodist_html_DATA) $(pkgconfig_DATA)
+HEADERS = $(include_HEADERS) $(nodist_noinst_HEADERS) \
+	$(noinst_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_TEST_CFLAGS = @AM_TEST_CFLAGS@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FUSE_CFLAGS = @FUSE_CFLAGS@
+FUSE_LIBS = @FUSE_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SONAME_AGE = @SONAME_AGE@
+SONAME_CURRENT = @SONAME_CURRENT@
+SONAME_REVISION = @SONAME_REVISION@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+VERSION_INFO = -version-info $(SONAME_CURRENT):$(SONAME_REVISION):$(SONAME_AGE)
+@DEBUG_TRUE@DEBUG_CFLAGS = -DDEBUG
+AUTOMAKE_OPTIONS = foreign nostdinc
+ACLOCAL_AMFLAGS = -I m4
+AM_CPPFLAGS = -I$(top_srcdir)/src -I$(top_builddir)/src
+AM_LD = $(CC)
+AM_CFLAGS = -Wall $(DEBUG_CFLAGS)
+
+# Additional project files
+
+# Documentation
+EXTRA_DIST = src/roxml-doxy.h.in fuse.xml/README libroxml.pc.in \
+	License.txt CMakeLists.txt data/html data/icons docs
+CLEANFILES = $(am__append_3)
+
+# Project headers
+include_HEADERS = src/roxml.h
+noinst_HEADERS = \
+	src/roxml-defines.h \
+	src/roxml-internal.h \
+	src/roxml-parse-engine.h \
+	src/roxml-tune.h \
+	src/roxml-types.h \
+	src/roxml-win32-native.h
+
+
+# Libraries
+lib_LTLIBRARIES = libroxml.la
+
+# The libroxml library
+libroxml_la_SOURCES = \
+	src/roxml.c \
+	src/roxml-internal.c \
+	src/roxml-parse-engine.c
+
+libroxml_la_LDFLAGS = $(VERSION_INFO)
+@ENABLE_ROXML_TRUE@roxml_SOURCES = src/roxml-parser.c
+@ENABLE_ROXML_TRUE@roxml_LDADD = libroxml.la
+@WITH_FUSE_TRUE@mount_fuse_xml_SOURCES = fuse.xml/xmlfs.c
+@WITH_FUSE_TRUE@mount_fuse_xml_CFLAGS = -D_FILE_OFFSET_BITS=64 $(FUSE_CFLAGS)
+@WITH_FUSE_TRUE@mount_fuse_xml_LDADD = libroxml.la $(FUSE_LIBS)
+
+# pkg-config .pc file
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libroxml.pc
+@DOCS_TRUE@man1_MANS = $(top_srcdir)/docs/roxml.1
+@DOCS_TRUE@nodist_man3_MANS = docs/man/man3/*.3
+@DOCS_TRUE@nodist_html_DATA = docs/html/*
+@ENABLE_TESTS_TRUE@noinst_bindir = unittest
+@ENABLE_TESTS_TRUE@nodist_noinst_HEADERS = unittest/unittest.h
+
+# Test libraries
+@ENABLE_TESTS_TRUE@noinst_LIBRARIES = \
+@ENABLE_TESTS_TRUE@		unittest/libroxml_test.a \
+@ENABLE_TESTS_TRUE@		unittest/libroxml_test_tiny.a
+
+@ENABLE_TESTS_TRUE@TEST_CFLAGS = -DUNITTEST -DREENTRANT -DLINUX -D__DEBUG -DIGNORE_EMPTY_TEXT_NODES -Wall -Wextra @AM_TEST_CFLAGS@
+
+# Test library libroxml_test.a
+@ENABLE_TESTS_TRUE@unittest_libroxml_test_a_SOURCES = \
+@ENABLE_TESTS_TRUE@	src/roxml.c \
+@ENABLE_TESTS_TRUE@	src/roxml-internal.c \
+@ENABLE_TESTS_TRUE@	src/roxml-parse-engine.c
+
+@ENABLE_TESTS_TRUE@unittest_libroxml_test_a_CFLAGS = $(TEST_CFLAGS)
+
+# Test library libroxml_test_tiny.a
+@ENABLE_TESTS_TRUE@unittest_libroxml_test_tiny_a_SOURCES = \
+@ENABLE_TESTS_TRUE@	src/roxml.c \
+@ENABLE_TESTS_TRUE@	src/roxml-internal.c \
+@ENABLE_TESTS_TRUE@	src/roxml-parse-engine.c
+
+@ENABLE_TESTS_TRUE@unittest_libroxml_test_tiny_a_CFLAGS = \
+@ENABLE_TESTS_TRUE@	$(TEST_CFLAGS) \
+@ENABLE_TESTS_TRUE@	-UHAVE_CONFIG_H \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_HEAP_BUFFERS=1 \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_SMALL_BUFFER=1 \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_SMALL_INPUT_FILE=1 \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_THREAD_SAFE=0 \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_READ_WRITE=0 \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_COMMIT_XML_TREE=0 \
+@ENABLE_TESTS_TRUE@	-DCONFIG_XML_XPATH_ENGINE=0
+
+
+# roxml.unitC
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_unitC_SOURCES = \
+@ENABLE_TESTS_TRUE@	unittest/unittest.c \
+@ENABLE_TESTS_TRUE@	unittest/roxml.test.c
+
+@ENABLE_TESTS_TRUE@unittest_roxml_unitC_LDADD = unittest/libroxml_test.a
+@ENABLE_TESTS_TRUE@unittest_roxml_unitC_CFLAGS = $(TEST_CFLAGS)
+
+# roxml.perf
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_perf_SOURCES = \
+@ENABLE_TESTS_TRUE@	unittest/roxml.perf.c
+
+@ENABLE_TESTS_TRUE@unittest_roxml_perf_LDADD = unittest/libroxml_test.a
+@ENABLE_TESTS_TRUE@unittest_roxml_perf_CFLAGS = -O3 -DREENTRANT -DLINUX -DIGNORE_EMPTY_TEXT_NODES -Wall
+
+# roxml.mem
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_mem_SOURCES = unittest/roxml.mem.c
+@ENABLE_TESTS_TRUE@unittest_roxml_mem_LDADD = unittest/libroxml_test.a
+@ENABLE_TESTS_TRUE@unittest_roxml_mem_CFLAGS = $(TEST_CFLAGS)
+
+# roxml.tiny.unitC
+@ENABLE_TESTS_TRUE@nodist_unittest_roxml_tiny_unitC_SOURCES = unittest/unittest.c
+@ENABLE_TESTS_TRUE@unittest_roxml_tiny_unitC_LDADD = unittest/libroxml_test_tiny.a
+@ENABLE_TESTS_TRUE@unittest_roxml_tiny_unitC_CFLAGS = $(TEST_CFLAGS)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+src/config.h: src/stamp-h1
+	@test -f $@ || rm -f src/stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) src/stamp-h1
+
+src/stamp-h1: $(top_srcdir)/src/config.h.in $(top_builddir)/config.status
+	@rm -f src/stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status src/config.h
+$(top_srcdir)/src/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f src/stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f src/config.h src/stamp-h1
+libroxml.pc: $(top_builddir)/config.status $(srcdir)/libroxml.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+docs/doxy.cfg: $(top_builddir)/config.status $(top_srcdir)/docs/doxy.cfg.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+docs/man.cfg: $(top_builddir)/config.status $(top_srcdir)/docs/man.cfg.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+src/roxml-doxy.h: $(top_builddir)/config.status $(top_srcdir)/src/roxml-doxy.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+src/$(am__dirstamp):
+	@$(MKDIR_P) src
+	@: > src/$(am__dirstamp)
+src/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/$(DEPDIR)
+	@: > src/$(DEPDIR)/$(am__dirstamp)
+src/unittest_libroxml_test_a-roxml.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+src/unittest_libroxml_test_a-roxml-internal.$(OBJEXT):  \
+	src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/unittest_libroxml_test_a-roxml-parse-engine.$(OBJEXT):  \
+	src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+unittest/$(am__dirstamp):
+	@$(MKDIR_P) unittest
+	@: > unittest/$(am__dirstamp)
+
+unittest/libroxml_test.a: $(unittest_libroxml_test_a_OBJECTS) $(unittest_libroxml_test_a_DEPENDENCIES) $(EXTRA_unittest_libroxml_test_a_DEPENDENCIES) unittest/$(am__dirstamp)
+	$(AM_V_at)-rm -f unittest/libroxml_test.a
+	$(AM_V_AR)$(unittest_libroxml_test_a_AR) unittest/libroxml_test.a $(unittest_libroxml_test_a_OBJECTS) $(unittest_libroxml_test_a_LIBADD)
+	$(AM_V_at)$(RANLIB) unittest/libroxml_test.a
+src/unittest_libroxml_test_tiny_a-roxml.$(OBJEXT):  \
+	src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/unittest_libroxml_test_tiny_a-roxml-internal.$(OBJEXT):  \
+	src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/unittest_libroxml_test_tiny_a-roxml-parse-engine.$(OBJEXT):  \
+	src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+
+unittest/libroxml_test_tiny.a: $(unittest_libroxml_test_tiny_a_OBJECTS) $(unittest_libroxml_test_tiny_a_DEPENDENCIES) $(EXTRA_unittest_libroxml_test_tiny_a_DEPENDENCIES) unittest/$(am__dirstamp)
+	$(AM_V_at)-rm -f unittest/libroxml_test_tiny.a
+	$(AM_V_AR)$(unittest_libroxml_test_tiny_a_AR) unittest/libroxml_test_tiny.a $(unittest_libroxml_test_tiny_a_OBJECTS) $(unittest_libroxml_test_tiny_a_LIBADD)
+	$(AM_V_at)$(RANLIB) unittest/libroxml_test_tiny.a
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+src/roxml.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/roxml-internal.lo: src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+src/roxml-parse-engine.lo: src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+libroxml.la: $(libroxml_la_OBJECTS) $(libroxml_la_DEPENDENCIES) $(EXTRA_libroxml_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(libroxml_la_LINK) -rpath $(libdir) $(libroxml_la_OBJECTS) $(libroxml_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+install-noinst_binPROGRAMS: $(noinst_bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(noinst_bin_PROGRAMS)'; test -n "$(noinst_bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(noinst_bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(noinst_bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(noinst_bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(noinst_bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-noinst_binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(noinst_bin_PROGRAMS)'; test -n "$(noinst_bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(noinst_bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(noinst_bindir)" && rm -f $$files
+
+clean-noinst_binPROGRAMS:
+	@list='$(noinst_bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+fuse.xml/$(am__dirstamp):
+	@$(MKDIR_P) fuse.xml
+	@: > fuse.xml/$(am__dirstamp)
+fuse.xml/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) fuse.xml/$(DEPDIR)
+	@: > fuse.xml/$(DEPDIR)/$(am__dirstamp)
+fuse.xml/mount_fuse_xml-xmlfs.$(OBJEXT): fuse.xml/$(am__dirstamp) \
+	fuse.xml/$(DEPDIR)/$(am__dirstamp)
+
+mount.fuse.xml$(EXEEXT): $(mount_fuse_xml_OBJECTS) $(mount_fuse_xml_DEPENDENCIES) $(EXTRA_mount_fuse_xml_DEPENDENCIES) 
+	@rm -f mount.fuse.xml$(EXEEXT)
+	$(AM_V_CCLD)$(mount_fuse_xml_LINK) $(mount_fuse_xml_OBJECTS) $(mount_fuse_xml_LDADD) $(LIBS)
+src/roxml-parser.$(OBJEXT): src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
+
+roxml$(EXEEXT): $(roxml_OBJECTS) $(roxml_DEPENDENCIES) $(EXTRA_roxml_DEPENDENCIES) 
+	@rm -f roxml$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(roxml_OBJECTS) $(roxml_LDADD) $(LIBS)
+unittest/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) unittest/$(DEPDIR)
+	@: > unittest/$(DEPDIR)/$(am__dirstamp)
+unittest/unittest_roxml_mem-roxml.mem.$(OBJEXT):  \
+	unittest/$(am__dirstamp) unittest/$(DEPDIR)/$(am__dirstamp)
+
+unittest/roxml.mem$(EXEEXT): $(unittest_roxml_mem_OBJECTS) $(unittest_roxml_mem_DEPENDENCIES) $(EXTRA_unittest_roxml_mem_DEPENDENCIES) unittest/$(am__dirstamp)
+	@rm -f unittest/roxml.mem$(EXEEXT)
+	$(AM_V_CCLD)$(unittest_roxml_mem_LINK) $(unittest_roxml_mem_OBJECTS) $(unittest_roxml_mem_LDADD) $(LIBS)
+unittest/unittest_roxml_perf-roxml.perf.$(OBJEXT):  \
+	unittest/$(am__dirstamp) unittest/$(DEPDIR)/$(am__dirstamp)
+
+unittest/roxml.perf$(EXEEXT): $(unittest_roxml_perf_OBJECTS) $(unittest_roxml_perf_DEPENDENCIES) $(EXTRA_unittest_roxml_perf_DEPENDENCIES) unittest/$(am__dirstamp)
+	@rm -f unittest/roxml.perf$(EXEEXT)
+	$(AM_V_CCLD)$(unittest_roxml_perf_LINK) $(unittest_roxml_perf_OBJECTS) $(unittest_roxml_perf_LDADD) $(LIBS)
+unittest/unittest_roxml_tiny_unitC-unittest.$(OBJEXT):  \
+	unittest/$(am__dirstamp) unittest/$(DEPDIR)/$(am__dirstamp)
+
+unittest/roxml.tiny.unitC$(EXEEXT): $(unittest_roxml_tiny_unitC_OBJECTS) $(unittest_roxml_tiny_unitC_DEPENDENCIES) $(EXTRA_unittest_roxml_tiny_unitC_DEPENDENCIES) unittest/$(am__dirstamp)
+	@rm -f unittest/roxml.tiny.unitC$(EXEEXT)
+	$(AM_V_CCLD)$(unittest_roxml_tiny_unitC_LINK) $(unittest_roxml_tiny_unitC_OBJECTS) $(unittest_roxml_tiny_unitC_LDADD) $(LIBS)
+unittest/unittest_roxml_unitC-unittest.$(OBJEXT):  \
+	unittest/$(am__dirstamp) unittest/$(DEPDIR)/$(am__dirstamp)
+unittest/unittest_roxml_unitC-roxml.test.$(OBJEXT):  \
+	unittest/$(am__dirstamp) unittest/$(DEPDIR)/$(am__dirstamp)
+
+unittest/roxml.unitC$(EXEEXT): $(unittest_roxml_unitC_OBJECTS) $(unittest_roxml_unitC_DEPENDENCIES) $(EXTRA_unittest_roxml_unitC_DEPENDENCIES) unittest/$(am__dirstamp)
+	@rm -f unittest/roxml.unitC$(EXEEXT)
+	$(AM_V_CCLD)$(unittest_roxml_unitC_LINK) $(unittest_roxml_unitC_OBJECTS) $(unittest_roxml_unitC_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+	-rm -f fuse.xml/*.$(OBJEXT)
+	-rm -f src/*.$(OBJEXT)
+	-rm -f src/*.lo
+	-rm -f unittest/*.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/roxml-internal.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/roxml-parse-engine.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/roxml-parser.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/roxml.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+src/unittest_libroxml_test_a-roxml.o: src/roxml.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_a-roxml.o -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Tpo -c -o src/unittest_libroxml_test_a-roxml.o `test -f 'src/roxml.c' || echo '$(srcdir)/'`src/roxml.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Tpo src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml.c' object='src/unittest_libroxml_test_a-roxml.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_a-roxml.o `test -f 'src/roxml.c' || echo '$(srcdir)/'`src/roxml.c
+
+src/unittest_libroxml_test_a-roxml.obj: src/roxml.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_a-roxml.obj -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Tpo -c -o src/unittest_libroxml_test_a-roxml.obj `if test -f 'src/roxml.c'; then $(CYGPATH_W) 'src/roxml.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Tpo src/$(DEPDIR)/unittest_libroxml_test_a-roxml.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml.c' object='src/unittest_libroxml_test_a-roxml.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_a-roxml.obj `if test -f 'src/roxml.c'; then $(CYGPATH_W) 'src/roxml.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml.c'; fi`
+
+src/unittest_libroxml_test_a-roxml-internal.o: src/roxml-internal.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_a-roxml-internal.o -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Tpo -c -o src/unittest_libroxml_test_a-roxml-internal.o `test -f 'src/roxml-internal.c' || echo '$(srcdir)/'`src/roxml-internal.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Tpo src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-internal.c' object='src/unittest_libroxml_test_a-roxml-internal.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_a-roxml-internal.o `test -f 'src/roxml-internal.c' || echo '$(srcdir)/'`src/roxml-internal.c
+
+src/unittest_libroxml_test_a-roxml-internal.obj: src/roxml-internal.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_a-roxml-internal.obj -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Tpo -c -o src/unittest_libroxml_test_a-roxml-internal.obj `if test -f 'src/roxml-internal.c'; then $(CYGPATH_W) 'src/roxml-internal.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-internal.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Tpo src/$(DEPDIR)/unittest_libroxml_test_a-roxml-internal.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-internal.c' object='src/unittest_libroxml_test_a-roxml-internal.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_a-roxml-internal.obj `if test -f 'src/roxml-internal.c'; then $(CYGPATH_W) 'src/roxml-internal.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-internal.c'; fi`
+
+src/unittest_libroxml_test_a-roxml-parse-engine.o: src/roxml-parse-engine.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_a-roxml-parse-engine.o -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Tpo -c -o src/unittest_libroxml_test_a-roxml-parse-engine.o `test -f 'src/roxml-parse-engine.c' || echo '$(srcdir)/'`src/roxml-parse-engine.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Tpo src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-parse-engine.c' object='src/unittest_libroxml_test_a-roxml-parse-engine.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_a-roxml-parse-engine.o `test -f 'src/roxml-parse-engine.c' || echo '$(srcdir)/'`src/roxml-parse-engine.c
+
+src/unittest_libroxml_test_a-roxml-parse-engine.obj: src/roxml-parse-engine.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_a-roxml-parse-engine.obj -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Tpo -c -o src/unittest_libroxml_test_a-roxml-parse-engine.obj `if test -f 'src/roxml-parse-engine.c'; then $(CYGPATH_W) 'src/roxml-parse-engine.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-parse-engine.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Tpo src/$(DEPDIR)/unittest_libroxml_test_a-roxml-parse-engine.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-parse-engine.c' object='src/unittest_libroxml_test_a-roxml-parse-engine.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_a-roxml-parse-engine.obj `if test -f 'src/roxml-parse-engine.c'; then $(CYGPATH_W) 'src/roxml-parse-engine.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-parse-engine.c'; fi`
+
+src/unittest_libroxml_test_tiny_a-roxml.o: src/roxml.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_tiny_a-roxml.o -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Tpo -c -o src/unittest_libroxml_test_tiny_a-roxml.o `test -f 'src/roxml.c' || echo '$(srcdir)/'`src/roxml.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Tpo src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml.c' object='src/unittest_libroxml_test_tiny_a-roxml.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_tiny_a-roxml.o `test -f 'src/roxml.c' || echo '$(srcdir)/'`src/roxml.c
+
+src/unittest_libroxml_test_tiny_a-roxml.obj: src/roxml.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_tiny_a-roxml.obj -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Tpo -c -o src/unittest_libroxml_test_tiny_a-roxml.obj `if test -f 'src/roxml.c'; then $(CYGPATH_W) 'src/roxml.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Tpo src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml.c' object='src/unittest_libroxml_test_tiny_a-roxml.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_tiny_a-roxml.obj `if test -f 'src/roxml.c'; then $(CYGPATH_W) 'src/roxml.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml.c'; fi`
+
+src/unittest_libroxml_test_tiny_a-roxml-internal.o: src/roxml-internal.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_tiny_a-roxml-internal.o -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Tpo -c -o src/unittest_libroxml_test_tiny_a-roxml-internal.o `test -f 'src/roxml-internal.c' || echo '$(srcdir)/'`src/roxml-internal.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Tpo src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-internal.c' object='src/unittest_libroxml_test_tiny_a-roxml-internal.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_tiny_a-roxml-internal.o `test -f 'src/roxml-internal.c' || echo '$(srcdir)/'`src/roxml-internal.c
+
+src/unittest_libroxml_test_tiny_a-roxml-internal.obj: src/roxml-internal.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_tiny_a-roxml-internal.obj -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Tpo -c -o src/unittest_libroxml_test_tiny_a-roxml-internal.obj `if test -f 'src/roxml-internal.c'; then $(CYGPATH_W) 'src/roxml-internal.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-internal.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Tpo src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-internal.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-internal.c' object='src/unittest_libroxml_test_tiny_a-roxml-internal.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_tiny_a-roxml-internal.obj `if test -f 'src/roxml-internal.c'; then $(CYGPATH_W) 'src/roxml-internal.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-internal.c'; fi`
+
+src/unittest_libroxml_test_tiny_a-roxml-parse-engine.o: src/roxml-parse-engine.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_tiny_a-roxml-parse-engine.o -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Tpo -c -o src/unittest_libroxml_test_tiny_a-roxml-parse-engine.o `test -f 'src/roxml-parse-engine.c' || echo '$(srcdir)/'`src/roxml-parse-engine.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Tpo src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-parse-engine.c' object='src/unittest_libroxml_test_tiny_a-roxml-parse-engine.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_tiny_a-roxml-parse-engine.o `test -f 'src/roxml-parse-engine.c' || echo '$(srcdir)/'`src/roxml-parse-engine.c
+
+src/unittest_libroxml_test_tiny_a-roxml-parse-engine.obj: src/roxml-parse-engine.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -MT src/unittest_libroxml_test_tiny_a-roxml-parse-engine.obj -MD -MP -MF src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Tpo -c -o src/unittest_libroxml_test_tiny_a-roxml-parse-engine.obj `if test -f 'src/roxml-parse-engine.c'; then $(CYGPATH_W) 'src/roxml-parse-engine.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-parse-engine.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Tpo src/$(DEPDIR)/unittest_libroxml_test_tiny_a-roxml-parse-engine.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='src/roxml-parse-engine.c' object='src/unittest_libroxml_test_tiny_a-roxml-parse-engine.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_libroxml_test_tiny_a_CFLAGS) $(CFLAGS) -c -o src/unittest_libroxml_test_tiny_a-roxml-parse-engine.obj `if test -f 'src/roxml-parse-engine.c'; then $(CYGPATH_W) 'src/roxml-parse-engine.c'; else $(CYGPATH_W) '$(srcdir)/src/roxml-parse-engine.c'; fi`
+
+fuse.xml/mount_fuse_xml-xmlfs.o: fuse.xml/xmlfs.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mount_fuse_xml_CFLAGS) $(CFLAGS) -MT fuse.xml/mount_fuse_xml-xmlfs.o -MD -MP -MF fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Tpo -c -o fuse.xml/mount_fuse_xml-xmlfs.o `test -f 'fuse.xml/xmlfs.c' || echo '$(srcdir)/'`fuse.xml/xmlfs.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Tpo fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='fuse.xml/xmlfs.c' object='fuse.xml/mount_fuse_xml-xmlfs.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mount_fuse_xml_CFLAGS) $(CFLAGS) -c -o fuse.xml/mount_fuse_xml-xmlfs.o `test -f 'fuse.xml/xmlfs.c' || echo '$(srcdir)/'`fuse.xml/xmlfs.c
+
+fuse.xml/mount_fuse_xml-xmlfs.obj: fuse.xml/xmlfs.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mount_fuse_xml_CFLAGS) $(CFLAGS) -MT fuse.xml/mount_fuse_xml-xmlfs.obj -MD -MP -MF fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Tpo -c -o fuse.xml/mount_fuse_xml-xmlfs.obj `if test -f 'fuse.xml/xmlfs.c'; then $(CYGPATH_W) 'fuse.xml/xmlfs.c'; else $(CYGPATH_W) '$(srcdir)/fuse.xml/xmlfs.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Tpo fuse.xml/$(DEPDIR)/mount_fuse_xml-xmlfs.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='fuse.xml/xmlfs.c' object='fuse.xml/mount_fuse_xml-xmlfs.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mount_fuse_xml_CFLAGS) $(CFLAGS) -c -o fuse.xml/mount_fuse_xml-xmlfs.obj `if test -f 'fuse.xml/xmlfs.c'; then $(CYGPATH_W) 'fuse.xml/xmlfs.c'; else $(CYGPATH_W) '$(srcdir)/fuse.xml/xmlfs.c'; fi`
+
+unittest/unittest_roxml_mem-roxml.mem.o: unittest/roxml.mem.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_mem_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_mem-roxml.mem.o -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Tpo -c -o unittest/unittest_roxml_mem-roxml.mem.o `test -f 'unittest/roxml.mem.c' || echo '$(srcdir)/'`unittest/roxml.mem.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Tpo unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/roxml.mem.c' object='unittest/unittest_roxml_mem-roxml.mem.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_mem_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_mem-roxml.mem.o `test -f 'unittest/roxml.mem.c' || echo '$(srcdir)/'`unittest/roxml.mem.c
+
+unittest/unittest_roxml_mem-roxml.mem.obj: unittest/roxml.mem.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_mem_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_mem-roxml.mem.obj -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Tpo -c -o unittest/unittest_roxml_mem-roxml.mem.obj `if test -f 'unittest/roxml.mem.c'; then $(CYGPATH_W) 'unittest/roxml.mem.c'; else $(CYGPATH_W) '$(srcdir)/unittest/roxml.mem.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Tpo unittest/$(DEPDIR)/unittest_roxml_mem-roxml.mem.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/roxml.mem.c' object='unittest/unittest_roxml_mem-roxml.mem.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_mem_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_mem-roxml.mem.obj `if test -f 'unittest/roxml.mem.c'; then $(CYGPATH_W) 'unittest/roxml.mem.c'; else $(CYGPATH_W) '$(srcdir)/unittest/roxml.mem.c'; fi`
+
+unittest/unittest_roxml_perf-roxml.perf.o: unittest/roxml.perf.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_perf_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_perf-roxml.perf.o -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Tpo -c -o unittest/unittest_roxml_perf-roxml.perf.o `test -f 'unittest/roxml.perf.c' || echo '$(srcdir)/'`unittest/roxml.perf.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Tpo unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/roxml.perf.c' object='unittest/unittest_roxml_perf-roxml.perf.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_perf_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_perf-roxml.perf.o `test -f 'unittest/roxml.perf.c' || echo '$(srcdir)/'`unittest/roxml.perf.c
+
+unittest/unittest_roxml_perf-roxml.perf.obj: unittest/roxml.perf.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_perf_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_perf-roxml.perf.obj -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Tpo -c -o unittest/unittest_roxml_perf-roxml.perf.obj `if test -f 'unittest/roxml.perf.c'; then $(CYGPATH_W) 'unittest/roxml.perf.c'; else $(CYGPATH_W) '$(srcdir)/unittest/roxml.perf.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Tpo unittest/$(DEPDIR)/unittest_roxml_perf-roxml.perf.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/roxml.perf.c' object='unittest/unittest_roxml_perf-roxml.perf.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_perf_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_perf-roxml.perf.obj `if test -f 'unittest/roxml.perf.c'; then $(CYGPATH_W) 'unittest/roxml.perf.c'; else $(CYGPATH_W) '$(srcdir)/unittest/roxml.perf.c'; fi`
+
+unittest/unittest_roxml_tiny_unitC-unittest.o: unittest/unittest.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_tiny_unitC_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_tiny_unitC-unittest.o -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Tpo -c -o unittest/unittest_roxml_tiny_unitC-unittest.o `test -f 'unittest/unittest.c' || echo '$(srcdir)/'`unittest/unittest.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Tpo unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/unittest.c' object='unittest/unittest_roxml_tiny_unitC-unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_tiny_unitC_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_tiny_unitC-unittest.o `test -f 'unittest/unittest.c' || echo '$(srcdir)/'`unittest/unittest.c
+
+unittest/unittest_roxml_tiny_unitC-unittest.obj: unittest/unittest.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_tiny_unitC_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_tiny_unitC-unittest.obj -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Tpo -c -o unittest/unittest_roxml_tiny_unitC-unittest.obj `if test -f 'unittest/unittest.c'; then $(CYGPATH_W) 'unittest/unittest.c'; else $(CYGPATH_W) '$(srcdir)/unittest/unittest.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Tpo unittest/$(DEPDIR)/unittest_roxml_tiny_unitC-unittest.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/unittest.c' object='unittest/unittest_roxml_tiny_unitC-unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_tiny_unitC_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_tiny_unitC-unittest.obj `if test -f 'unittest/unittest.c'; then $(CYGPATH_W) 'unittest/unittest.c'; else $(CYGPATH_W) '$(srcdir)/unittest/unittest.c'; fi`
+
+unittest/unittest_roxml_unitC-unittest.o: unittest/unittest.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_unitC-unittest.o -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Tpo -c -o unittest/unittest_roxml_unitC-unittest.o `test -f 'unittest/unittest.c' || echo '$(srcdir)/'`unittest/unittest.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Tpo unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/unittest.c' object='unittest/unittest_roxml_unitC-unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_unitC-unittest.o `test -f 'unittest/unittest.c' || echo '$(srcdir)/'`unittest/unittest.c
+
+unittest/unittest_roxml_unitC-unittest.obj: unittest/unittest.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_unitC-unittest.obj -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Tpo -c -o unittest/unittest_roxml_unitC-unittest.obj `if test -f 'unittest/unittest.c'; then $(CYGPATH_W) 'unittest/unittest.c'; else $(CYGPATH_W) '$(srcdir)/unittest/unittest.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Tpo unittest/$(DEPDIR)/unittest_roxml_unitC-unittest.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/unittest.c' object='unittest/unittest_roxml_unitC-unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_unitC-unittest.obj `if test -f 'unittest/unittest.c'; then $(CYGPATH_W) 'unittest/unittest.c'; else $(CYGPATH_W) '$(srcdir)/unittest/unittest.c'; fi`
+
+unittest/unittest_roxml_unitC-roxml.test.o: unittest/roxml.test.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_unitC-roxml.test.o -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Tpo -c -o unittest/unittest_roxml_unitC-roxml.test.o `test -f 'unittest/roxml.test.c' || echo '$(srcdir)/'`unittest/roxml.test.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Tpo unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/roxml.test.c' object='unittest/unittest_roxml_unitC-roxml.test.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_unitC-roxml.test.o `test -f 'unittest/roxml.test.c' || echo '$(srcdir)/'`unittest/roxml.test.c
+
+unittest/unittest_roxml_unitC-roxml.test.obj: unittest/roxml.test.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -MT unittest/unittest_roxml_unitC-roxml.test.obj -MD -MP -MF unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Tpo -c -o unittest/unittest_roxml_unitC-roxml.test.obj `if test -f 'unittest/roxml.test.c'; then $(CYGPATH_W) 'unittest/roxml.test.c'; else $(CYGPATH_W) '$(srcdir)/unittest/roxml.test.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Tpo unittest/$(DEPDIR)/unittest_roxml_unitC-roxml.test.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unittest/roxml.test.c' object='unittest/unittest_roxml_unitC-roxml.test.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(unittest_roxml_unitC_CFLAGS) $(CFLAGS) -c -o unittest/unittest_roxml_unitC-roxml.test.obj `if test -f 'unittest/roxml.test.c'; then $(CYGPATH_W) 'unittest/roxml.test.c'; else $(CYGPATH_W) '$(srcdir)/unittest/roxml.test.c'; fi`
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+	-rm -rf src/.libs src/_libs
+	-rm -rf unittest/.libs unittest/_libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-man1: $(man1_MANS)
+	@$(NORMAL_INSTALL)
+	@list1='$(man1_MANS)'; \
+	list2=''; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-man3: $(nodist_man3_MANS)
+	@$(NORMAL_INSTALL)
+	@list1='$(nodist_man3_MANS)'; \
+	list2=''; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nodist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+install-nodist_htmlDATA: $(nodist_html_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nodist_html_DATA)'; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done
+
+uninstall-nodist_htmlDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nodist_html_DATA)'; test -n "$(htmldir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir)
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(PROGRAMS) $(MANS) \
+		$(DATA) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(noinst_bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(htmldir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-rm -f fuse.xml/$(DEPDIR)/$(am__dirstamp)
+	-rm -f fuse.xml/$(am__dirstamp)
+	-rm -f src/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/$(am__dirstamp)
+	-rm -f unittest/$(DEPDIR)/$(am__dirstamp)
+	-rm -f unittest/$(am__dirstamp)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+@DOCS_FALSE@clean-local:
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool clean-local clean-noinstLIBRARIES \
+	clean-noinst_binPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf fuse.xml/$(DEPDIR) src/$(DEPDIR) unittest/$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS install-man \
+	install-nodist_htmlDATA install-noinst_binPROGRAMS \
+	install-pkgconfigDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1 install-man3
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf fuse.xml/$(DEPDIR) src/$(DEPDIR) unittest/$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-man \
+	uninstall-nodist_htmlDATA uninstall-noinst_binPROGRAMS \
+	uninstall-pkgconfigDATA
+
+uninstall-man: uninstall-man1 uninstall-man3
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-cscope clean-generic \
+	clean-libLTLIBRARIES clean-libtool clean-local \
+	clean-noinstLIBRARIES clean-noinst_binPROGRAMS cscope \
+	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-man1 install-man3 \
+	install-nodist_htmlDATA install-noinst_binPROGRAMS install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-man uninstall-man1 \
+	uninstall-man3 uninstall-nodist_htmlDATA \
+	uninstall-noinst_binPROGRAMS uninstall-pkgconfigDATA
+
+
+@DOCS_TRUE@docs: doxygen-docs
+@DOCS_TRUE@doxygen-docs: doxygen-html doxygen-man
+
+@DOCS_TRUE@doxygen-html:
+@DOCS_TRUE@	$(AM_V_GEN)$(DOXYGEN) docs/doxy.cfg >/dev/null 2>&1
+@DOCS_TRUE@	$(AM_V_GEN)cp $(top_srcdir)/data/icons/roxml.png docs/html/
+@DOCS_TRUE@	$(AM_V_GEN)cp $(top_srcdir)/data/icons/libroxml-ex.png docs/html/
+
+@DOCS_TRUE@doxygen-man:
+@DOCS_TRUE@	$(AM_V_GEN)$(DOXYGEN) docs/man.cfg >/dev/null 2>&1
+@DOCS_TRUE@	$(AM_V_GEN)chmod -R a+rw docs
+
+@DOCS_TRUE@clean-local: docs-clean
+@DOCS_TRUE@docs-clean:
+@DOCS_TRUE@	rm -Rf \
+@DOCS_TRUE@	docs/man \
+@DOCS_TRUE@	docs/html \
+@DOCS_TRUE@	docs/latex
+
+@DOCS_TRUE@$(man1_MANS): docs
+@DOCS_TRUE@$(nodist_man3_MANS): docs
+@DOCS_TRUE@$(nodist_html_DATA): docs
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/Libs/libroxml-2.3.0/aclocal.m4 b/Libs/libroxml-2.3.0/aclocal.m4
new file mode 100644
index 0000000000000000000000000000000000000000..3d24c32d224159c70e2f9a5178d0d24024f06876
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aclocal.m4
@@ -0,0 +1,1314 @@
+# generated automatically by aclocal 1.14 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+# 
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists.  Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])# PKG_CHECK_MODULES
+
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.14'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.14], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.14])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
diff --git a/Libs/libroxml-2.3.0/aux_scripts/compile b/Libs/libroxml-2.3.0/aux_scripts/compile
new file mode 100644
index 0000000000000000000000000000000000000000..531136b068ef00e23d38429e6ee9a57d581a0870
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/Libs/libroxml-2.3.0/aux_scripts/config.guess b/Libs/libroxml-2.3.0/aux_scripts/config.guess
new file mode 100644
index 0000000000000000000000000000000000000000..b79252d6b1034cbcce18ed21d4ed21a405f987e9
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/config.guess
@@ -0,0 +1,1558 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
+
+timestamp='2013-06-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2013 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    cris:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    crisv32:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    frv:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	;;
+    or1k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-${LIBC}
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-${LIBC}
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	exit ;;
+    x86_64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		case $UNAME_PROCESSOR in
+		    i386) UNAME_PROCESSOR=x86_64 ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		esac
+	    fi
+	fi
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
+esac
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+	"4"
+#else
+	""
+#endif
+	); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/Libs/libroxml-2.3.0/aux_scripts/config.sub b/Libs/libroxml-2.3.0/aux_scripts/config.sub
new file mode 100644
index 0000000000000000000000000000000000000000..9633db704678e91ad221adc4f30a22ce0bc61e1b
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/config.sub
@@ -0,0 +1,1791 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
+
+timestamp='2013-08-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2013 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze*)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
+	| bfin \
+	| c4x | c8051 | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
+	| ns16k | ns32k \
+	| open8 \
+	| or1k | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
+	mingw32)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or1k-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/Libs/libroxml-2.3.0/aux_scripts/depcomp b/Libs/libroxml-2.3.0/aux_scripts/depcomp
new file mode 100644
index 0000000000000000000000000000000000000000..4ebd5b3a2f2d689de95251c9424e2763aa159de5
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/Libs/libroxml-2.3.0/aux_scripts/install-sh b/Libs/libroxml-2.3.0/aux_scripts/install-sh
new file mode 100644
index 0000000000000000000000000000000000000000..377bb8687ffe16bfc79ea25c8667cabf72aaf2c2
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-11-20.07; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/Libs/libroxml-2.3.0/aux_scripts/ltmain.sh b/Libs/libroxml-2.3.0/aux_scripts/ltmain.sh
new file mode 100644
index 0000000000000000000000000000000000000000..68c6d96ca5e37ac001a33a6d6a8e2d3f6fded2a2
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/ltmain.sh
@@ -0,0 +1,9661 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.3
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION="2.4.2 Debian-2.4.2-1.3"
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
+
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with \`-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps ; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_preserve_dup_deps ; then
+		case "$tmp_libs " in
+		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+		esac
+	      fi
+	      func_append tmp_libs " $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    echo
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  *)
+	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_append libobjs " $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$opt_mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS="$save_ifs"
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$opt_mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$opt_mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
+
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=yes
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
+      else
+	odir="$dir/$objdir"
+      fi
+      func_basename "$file"
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case "$opt_mode" in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$opt_mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/Libs/libroxml-2.3.0/aux_scripts/missing b/Libs/libroxml-2.3.0/aux_scripts/missing
new file mode 100644
index 0000000000000000000000000000000000000000..cdea514931f558be2bcc47ef2d52e14ab395520b
--- /dev/null
+++ b/Libs/libroxml-2.3.0/aux_scripts/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2012-06-26.16; # UTC
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'automa4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/Libs/libroxml-2.3.0/configure b/Libs/libroxml-2.3.0/configure
new file mode 100644
index 0000000000000000000000000000000000000000..ca098a4c0b3e869a45b9aa7ef5e244cd0b2da4ab
--- /dev/null
+++ b/Libs/libroxml-2.3.0/configure
@@ -0,0 +1,15352 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for libroxml 2.3.0.
+#
+# Report bugs to <tristan.lelong@libroxml.net>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: tristan.lelong@libroxml.net about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libroxml'
+PACKAGE_TARNAME='libroxml'
+PACKAGE_VERSION='2.3.0'
+PACKAGE_STRING='libroxml 2.3.0'
+PACKAGE_BUGREPORT='tristan.lelong@libroxml.net'
+PACKAGE_URL=''
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+DEBUG_FALSE
+DEBUG_TRUE
+FUSE_LIBS
+FUSE_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+WITH_FUSE_FALSE
+WITH_FUSE_TRUE
+ENABLE_TESTS_FALSE
+ENABLE_TESTS_TRUE
+DOXYGEN
+DOCS_FALSE
+DOCS_TRUE
+ENABLE_ROXML_FALSE
+ENABLE_ROXML_TRUE
+AM_TEST_CFLAGS
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+AS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+AWK
+RANLIB
+STRIP
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+SONAME_AGE
+SONAME_REVISION
+SONAME_CURRENT
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_dependency_tracking
+enable_silent_rules
+enable_roxml
+enable_docs
+enable_tests
+with_fuse
+enable_debug
+enable_xml_thread_safe
+enable_xml_heap_buffers
+enable_xml_small_buffer
+enable_xml_small_input_file
+enable_xml_read_write
+enable_xml_commit_xml_tree
+enable_xml_xpath_engine
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+FUSE_CFLAGS
+FUSE_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libroxml 2.3.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libroxml]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libroxml 2.3.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --disable-roxml         Disable roxml binary build [default=yes]
+  --enable-docs           Enable documentation build [default=no]
+  --enable-tests          Enable unit tests build (only available from git
+                          repository)[default=no]
+  --enable-debug          Turn on debugging [default=no]
+  --disable-xml-thread-safe
+                          Is the target library thread safe or not.
+                          [default=yes]
+  --enable-xml-heap-buffers
+                          Is the target library uses stack for internal
+                          buffers or heap. This is not compatible with thread
+                          safety. [default=no]
+  --enable-xml-small-buffer
+                          Define the size of internal buffer. For very small
+                          systems, large internal buffers can cause the
+                          systeml the behave strangely. [default=no]
+  --enable-xml-small-input-file
+                          Limit the size of input XML libroxml can handle to
+                          64kb instead of 4Gb. Setting this option will reduce
+                          the size of RAM loaded tree. [default=no]
+  --disable-xml-read-write
+                          Can the target library modify XML tree. When set to
+                          0, this result in smaller binary (this saves about
+                          3kb). [default=yes]
+  --disable-xml-commit-xml-tree
+                          Can the target library commit a tree. When set to 0,
+                          this result in smaller binary (this saves about
+                          5kb). [default=yes]
+  --disable-xml-xpath-engine
+                          Can the target library perform xpath queries. When
+                          set to 0, this result in smaller binary (this saves
+                          about 20kb). [default=yes]
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+  --with-fuse             Build fuse helper [default=no]
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  PKG_CONFIG  path to pkg-config utility
+  PKG_CONFIG_PATH
+              directories to add to pkg-config's search path
+  PKG_CONFIG_LIBDIR
+              path overriding pkg-config's built-in search path
+  FUSE_CFLAGS C compiler flags for FUSE, overriding pkg-config
+  FUSE_LIBS   linker flags for FUSE, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <tristan.lelong@libroxml.net>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+libroxml configure 2.3.0
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if test "$cross_compiling" = yes; then
+    # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid; break
+else
+  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=$ac_mid; break
+else
+  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid
+else
+  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    return 1;
+  if (($2) < 0)
+    {
+      long int i = longval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%ld", i);
+    }
+  else
+    {
+      unsigned long int i = ulongval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%lu", i);
+    }
+  /* Do not output a trailing newline, as this causes \r\n confusion
+     on some platforms.  */
+  return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+  ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+  fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_compute_int
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libroxml $as_me 2.3.0, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_aux_dir=
+for ac_dir in aux_scripts "$srcdir"/aux_scripts; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in aux_scripts \"$srcdir\"/aux_scripts" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+# Values for SONAME. See -version-info for details.
+SONAME_CURRENT=0
+
+SONAME_REVISION=0
+
+SONAME_AGE=0
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+	test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    link_all_deplibs=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+	link_all_deplibs=no
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+ac_config_headers="$ac_config_headers src/config.h"
+
+am__api_version='1.14'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libroxml'
+ VERSION='2.3.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+
+# needed to handle 64-bit architecture
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
+$as_echo_n "checking size of int... " >&6; }
+if ${ac_cv_sizeof_int+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_int" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (int)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_int=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5
+$as_echo "$ac_cv_sizeof_int" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
+$as_echo_n "checking size of long... " >&6; }
+if ${ac_cv_sizeof_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_long" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_long=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
+$as_echo "$ac_cv_sizeof_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of size_t" >&5
+$as_echo_n "checking size of size_t... " >&6; }
+if ${ac_cv_sizeof_size_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (size_t))" "ac_cv_sizeof_size_t"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_size_t" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (size_t)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_size_t=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_size_t" >&5
+$as_echo "$ac_cv_sizeof_size_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t
+_ACEOF
+
+
+
+# tests some compiler flags
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether CC supports -Wno-unused" >&5
+$as_echo_n "checking whether CC supports -Wno-unused... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+		AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether CC supports -Wunused-parameter" >&5
+$as_echo_n "checking whether CC supports -Wunused-parameter... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+		AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused-parameter"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether CC supports -Wunused-variable" >&5
+$as_echo_n "checking whether CC supports -Wunused-variable... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+		AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused-variable"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether CC supports -Wunused-but-set-variable" >&5
+$as_echo_n "checking whether CC supports -Wunused-but-set-variable... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+		AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused-but-set-variable"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: " >&5
+$as_echo "$as_me: " >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Configuration is:" >&5
+$as_echo "$as_me: Configuration is:" >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: " >&5
+$as_echo "$as_me: " >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: General:" >&5
+$as_echo "$as_me: General:" >&6;}
+
+################################
+# Build roxml binary
+################################
+# Check whether --enable-roxml was given.
+if test "${enable_roxml+set}" = set; then :
+  enableval=$enable_roxml;
+else
+  enable_roxml=yes
+fi
+
+ if test x$enable_roxml != xno; then
+  ENABLE_ROXML_TRUE=
+  ENABLE_ROXML_FALSE='#'
+else
+  ENABLE_ROXML_TRUE='#'
+  ENABLE_ROXML_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Roxml shell parser    ......... $enable_roxml" >&5
+$as_echo "$as_me: Roxml shell parser    ......... $enable_roxml" >&6;}
+
+################################
+# Documentation
+################################
+# Check whether --enable-docs was given.
+if test "${enable_docs+set}" = set; then :
+  enableval=$enable_docs;
+else
+  enable_docs=no
+fi
+
+ if test x$enable_docs != xno; then
+  DOCS_TRUE=
+  DOCS_FALSE='#'
+else
+  DOCS_TRUE='#'
+  DOCS_FALSE=
+fi
+
+if test x$enable_docs != xno; then
+    # Extract the first word of "doxygen", so it can be a program name with args.
+set dummy doxygen; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DOXYGEN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $DOXYGEN in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+DOXYGEN=$ac_cv_path_DOXYGEN
+if test -n "$DOXYGEN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOXYGEN" >&5
+$as_echo "$DOXYGEN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    if test x$DOXYGEN = x; then
+        as_fn_error $? "doxygen not found: the docs cannot be built" "$LINENO" 5
+    fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Documentation         ......... $enable_docs" >&5
+$as_echo "$as_me: Documentation         ......... $enable_docs" >&6;}
+
+################################
+# Build unit tests
+################################
+# Check whether --enable-tests was given.
+if test "${enable_tests+set}" = set; then :
+  enableval=$enable_tests;
+else
+  enable_tests=no
+fi
+
+if test x$enable_tests != xno; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for unittest/unittest.c" >&5
+$as_echo_n "checking for unittest/unittest.c... " >&6; }
+if ${ac_cv_file_unittest_unittest_c+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  test "$cross_compiling" = yes &&
+  as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
+if test -r "unittest/unittest.c"; then
+  ac_cv_file_unittest_unittest_c=yes
+else
+  ac_cv_file_unittest_unittest_c=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_file_unittest_unittest_c" >&5
+$as_echo "$ac_cv_file_unittest_unittest_c" >&6; }
+if test "x$ac_cv_file_unittest_unittest_c" = xyes; then :
+
+else
+  enable_tests=no
+fi
+
+fi
+ if test x$enable_tests != xno; then
+  ENABLE_TESTS_TRUE=
+  ENABLE_TESTS_FALSE='#'
+else
+  ENABLE_TESTS_TRUE='#'
+  ENABLE_TESTS_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Unittests             ......... $enable_tests" >&5
+$as_echo "$as_me: Unittests             ......... $enable_tests" >&6;}
+
+################################
+# Fuse helper
+################################
+
+# Check whether --with-fuse was given.
+if test "${with_fuse+set}" = set; then :
+  withval=$with_fuse;
+else
+  with_fuse=no
+fi
+
+ if test x$with_fuse = xyes; then
+  WITH_FUSE_TRUE=
+  WITH_FUSE_FALSE='#'
+else
+  WITH_FUSE_TRUE='#'
+  WITH_FUSE_FALSE=
+fi
+
+if test x$with_fuse = xyes; then
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+  ac_pt_PKG_CONFIG=$PKG_CONFIG
+  # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $ac_pt_PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
+else
+  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=0.9.0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	else
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+		PKG_CONFIG=""
+	fi
+fi
+for ac_header in fuse.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "fuse.h" "ac_cv_header_fuse_h" "
+#define _FILE_OFFSET_BITS 64
+#include <fuse.h>
+
+
+"
+if test "x$ac_cv_header_fuse_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_FUSE_H 1
+_ACEOF
+
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FUSE" >&5
+$as_echo_n "checking for FUSE... " >&6; }
+
+if test -n "$FUSE_CFLAGS"; then
+    pkg_cv_FUSE_CFLAGS="$FUSE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"fuse\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "fuse") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_FUSE_CFLAGS=`$PKG_CONFIG --cflags "fuse" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$FUSE_LIBS"; then
+    pkg_cv_FUSE_LIBS="$FUSE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"fuse\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "fuse") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_FUSE_LIBS=`$PKG_CONFIG --libs "fuse" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        FUSE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "fuse" 2>&1`
+        else
+	        FUSE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "fuse" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$FUSE_PKG_ERRORS" >&5
+
+
+                         { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing fuse_main" >&5
+$as_echo_n "checking for library containing fuse_main... " >&6; }
+if ${ac_cv_search_fuse_main+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char fuse_main ();
+int
+main ()
+{
+return fuse_main ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' fuse; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_fuse_main=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_fuse_main+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_fuse_main+:} false; then :
+
+else
+  ac_cv_search_fuse_main=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_fuse_main" >&5
+$as_echo "$ac_cv_search_fuse_main" >&6; }
+ac_res=$ac_cv_search_fuse_main
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+
+                             as_fn_error $? "unable to find the fuse library" "$LINENO" 5
+
+fi
+
+
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+                         { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing fuse_main" >&5
+$as_echo_n "checking for library containing fuse_main... " >&6; }
+if ${ac_cv_search_fuse_main+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char fuse_main ();
+int
+main ()
+{
+return fuse_main ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' fuse; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_fuse_main=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_fuse_main+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_fuse_main+:} false; then :
+
+else
+  ac_cv_search_fuse_main=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_fuse_main" >&5
+$as_echo "$ac_cv_search_fuse_main" >&6; }
+ac_res=$ac_cv_search_fuse_main
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+
+                             as_fn_error $? "unable to find the fuse library" "$LINENO" 5
+
+fi
+
+
+else
+	FUSE_CFLAGS=$pkg_cv_FUSE_CFLAGS
+	FUSE_LIBS=$pkg_cv_FUSE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+fi
+
+else
+  as_fn_error $? "fuse.h not found: the fuse xml helper cannot be built" "$LINENO" 5
+fi
+
+done
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Fuse module           ......... $with_fuse" >&5
+$as_echo "$as_me: Fuse module           ......... $with_fuse" >&6;}
+
+################################
+# Debugging options
+################################
+# Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then :
+  enableval=$enable_debug;
+else
+  enable_debug=no
+fi
+
+ if test x$enable_debug = xyes; then
+  DEBUG_TRUE=
+  DEBUG_FALSE='#'
+else
+  DEBUG_TRUE='#'
+  DEBUG_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Debug                 ......... $enable_debug" >&5
+$as_echo "$as_me: Debug                 ......... $enable_debug" >&6;}
+
+################################
+# Tune options
+################################
+{ $as_echo "$as_me:${as_lineno-$LINENO}: " >&5
+$as_echo "$as_me: " >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Tuning:" >&5
+$as_echo "$as_me: Tuning:" >&6;}
+
+
+
+# CONFIG_XML_THREAD_SAFE
+
+    # Check whether --enable-xml_thread_safe was given.
+if test "${enable_xml_thread_safe+set}" = set; then :
+  enableval=$enable_xml_thread_safe;
+                      if test x$enableval = xno; then
+                          xml_thread_safe=no
+                      else
+                          xml_thread_safe=yes
+                      fi
+
+else
+  xml_thread_safe=yes
+
+fi
+
+    if test x$xml_thread_safe != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Thread safety         ......... yes" >&5
+$as_echo "$as_me: Thread safety         ......... yes" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Thread safety         ......... no" >&5
+$as_echo "$as_me: Thread safety         ......... no" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_THREAD_SAFE $roxml_tune
+_ACEOF
+
+
+
+# CONFIG_XML_HEAP_BUFFERS
+
+    # Check whether --enable-xml_heap_buffers was given.
+if test "${enable_xml_heap_buffers+set}" = set; then :
+  enableval=$enable_xml_heap_buffers;
+                      if test x$enableval = xno; then
+                          xml_heap_buffers=no
+                      else
+                          xml_heap_buffers=yes
+                      fi
+
+else
+  xml_heap_buffers=no
+
+fi
+
+    if test x$xml_heap_buffers != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Buffers type          ......... stack" >&5
+$as_echo "$as_me: Buffers type          ......... stack" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Buffers type          ......... heap" >&5
+$as_echo "$as_me: Buffers type          ......... heap" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_HEAP_BUFFERS $roxml_tune
+_ACEOF
+
+
+
+# CONFIG_XML_SMALL_BUFFER
+
+    # Check whether --enable-xml_small_buffer was given.
+if test "${enable_xml_small_buffer+set}" = set; then :
+  enableval=$enable_xml_small_buffer;
+                      if test x$enableval = xno; then
+                          xml_small_buffer=no
+                      else
+                          xml_small_buffer=yes
+                      fi
+
+else
+  xml_small_buffer=no
+
+fi
+
+    if test x$xml_small_buffer != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Internal buffers      ......... small" >&5
+$as_echo "$as_me: Internal buffers      ......... small" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Internal buffers      ......... standard" >&5
+$as_echo "$as_me: Internal buffers      ......... standard" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_SMALL_BUFFER $roxml_tune
+_ACEOF
+
+
+
+# CONFIG_XML_SMALL_INPUT_FILE
+
+    # Check whether --enable-xml_small_input_file was given.
+if test "${enable_xml_small_input_file+set}" = set; then :
+  enableval=$enable_xml_small_input_file;
+                      if test x$enableval = xno; then
+                          xml_small_input_file=no
+                      else
+                          xml_small_input_file=yes
+                      fi
+
+else
+  xml_small_input_file=no
+
+fi
+
+    if test x$xml_small_input_file != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Input file            ......... small (< 64kB)" >&5
+$as_echo "$as_me: Input file            ......... small (< 64kB)" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Input file            ......... large (> 64kB)" >&5
+$as_echo "$as_me: Input file            ......... large (> 64kB)" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_SMALL_INPUT_FILE $roxml_tune
+_ACEOF
+
+
+
+# CONFIG_XML_READ_WRITE
+
+    # Check whether --enable-xml_read_write was given.
+if test "${enable_xml_read_write+set}" = set; then :
+  enableval=$enable_xml_read_write;
+                      if test x$enableval = xno; then
+                          xml_read_write=no
+                      else
+                          xml_read_write=yes
+                      fi
+
+else
+  xml_read_write=yes
+
+fi
+
+    if test x$xml_read_write != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Write support         ......... yes" >&5
+$as_echo "$as_me: Write support         ......... yes" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Write support         ......... no" >&5
+$as_echo "$as_me: Write support         ......... no" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_READ_WRITE $roxml_tune
+_ACEOF
+
+
+
+# CONFIG_XML_COMMIT_XML_TREE
+
+    # Check whether --enable-xml_commit_xml_tree was given.
+if test "${enable_xml_commit_xml_tree+set}" = set; then :
+  enableval=$enable_xml_commit_xml_tree;
+                      if test x$enableval = xno; then
+                          xml_commit_xml_tree=no
+                      else
+                          xml_commit_xml_tree=yes
+                      fi
+
+else
+  xml_commit_xml_tree=yes
+
+fi
+
+    if test x$xml_commit_xml_tree != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Commit support        ......... yes" >&5
+$as_echo "$as_me: Commit support        ......... yes" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Commit support        ......... no" >&5
+$as_echo "$as_me: Commit support        ......... no" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_COMMIT_XML_TREE $roxml_tune
+_ACEOF
+
+
+
+# CONFIG_XML_XPATH_ENGINE
+
+    # Check whether --enable-xml_xpath_engine was given.
+if test "${enable_xml_xpath_engine+set}" = set; then :
+  enableval=$enable_xml_xpath_engine;
+                      if test x$enableval = xno; then
+                          xml_xpath_engine=no
+                      else
+                          xml_xpath_engine=yes
+                      fi
+
+else
+  xml_xpath_engine=yes
+
+fi
+
+    if test x$xml_xpath_engine != xno; then
+        roxml_tune=1
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Xpath support         ......... yes" >&5
+$as_echo "$as_me: Xpath support         ......... yes" >&6;}
+    else
+        roxml_tune=0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: Xpath support         ......... no" >&5
+$as_echo "$as_me: Xpath support         ......... no" >&6;}
+    fi
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XML_XPATH_ENGINE $roxml_tune
+_ACEOF
+
+
+
+################################
+# Output files
+################################
+{ $as_echo "$as_me:${as_lineno-$LINENO}: " >&5
+$as_echo "$as_me: " >&6;}
+ac_config_files="$ac_config_files Makefile libroxml.pc docs/doxy.cfg docs/man.cfg src/roxml-doxy.h"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${ENABLE_ROXML_TRUE}" && test -z "${ENABLE_ROXML_FALSE}"; then
+  as_fn_error $? "conditional \"ENABLE_ROXML\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DOCS_TRUE}" && test -z "${DOCS_FALSE}"; then
+  as_fn_error $? "conditional \"DOCS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ENABLE_TESTS_TRUE}" && test -z "${ENABLE_TESTS_FALSE}"; then
+  as_fn_error $? "conditional \"ENABLE_TESTS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${WITH_FUSE_TRUE}" && test -z "${WITH_FUSE_FALSE}"; then
+  as_fn_error $? "conditional \"WITH_FUSE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DEBUG_TRUE}" && test -z "${DEBUG_FALSE}"; then
+  as_fn_error $? "conditional \"DEBUG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libroxml $as_me 2.3.0, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <tristan.lelong@libroxml.net>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libroxml config.status 2.3.0
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+AS; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "libroxml.pc") CONFIG_FILES="$CONFIG_FILES libroxml.pc" ;;
+    "docs/doxy.cfg") CONFIG_FILES="$CONFIG_FILES docs/doxy.cfg" ;;
+    "docs/man.cfg") CONFIG_FILES="$CONFIG_FILES docs/man.cfg" ;;
+    "src/roxml-doxy.h") CONFIG_FILES="$CONFIG_FILES src/roxml-doxy.h" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Assembler program.
+AS=$lt_AS
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/Libs/libroxml-2.3.0/configure.ac b/Libs/libroxml-2.3.0/configure.ac
new file mode 100644
index 0000000000000000000000000000000000000000..3436945e639d757a3888cdaafeb087fb38993c5c
--- /dev/null
+++ b/Libs/libroxml-2.3.0/configure.ac
@@ -0,0 +1,243 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+m4_define([MAJOR_VERSION], 2)
+m4_define([MINOR_VERSION], 3)
+m4_define([MICRO_VERSION], 0)
+
+AC_PREREQ(2.59)
+AC_INIT([libroxml],
+        [MAJOR_VERSION.MINOR_VERSION.MICRO_VERSION],
+        [tristan.lelong@libroxml.net])
+AC_CONFIG_AUX_DIR(aux_scripts)
+AC_CONFIG_MACRO_DIR([m4])
+
+# Values for SONAME. See -version-info for details.
+AC_SUBST(SONAME_CURRENT, 0)
+AC_SUBST(SONAME_REVISION, 0)
+AC_SUBST(SONAME_AGE, 0)
+
+# Checks for programs.
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_PROG_LIBTOOL
+AC_LIBTOOL_WIN32_DLL
+
+AC_CONFIG_HEADERS([src/config.h])
+AM_INIT_AUTOMAKE(subdir-objects)
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES])
+AM_SILENT_RULES([yes])
+
+# needed to handle 64-bit architecture
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(long)
+AC_CHECK_SIZEOF(size_t)
+
+# tests some compiler flags
+AC_MSG_CHECKING([whether CC supports -Wno-unused])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+		[AC_MSG_RESULT([yes])]
+		[AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused"],
+		[AC_MSG_RESULT([no])])
+
+AC_MSG_CHECKING([whether CC supports -Wunused-parameter])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+		[AC_MSG_RESULT([yes])]
+		[AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused-parameter"],
+		[AC_MSG_RESULT([no])])
+
+AC_MSG_CHECKING([whether CC supports -Wunused-variable])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+		[AC_MSG_RESULT([yes])]
+		[AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused-variable"],
+		[AC_MSG_RESULT([no])])
+
+AC_MSG_CHECKING([whether CC supports -Wunused-but-set-variable])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+		[AC_MSG_RESULT([yes])]
+		[AM_TEST_CFLAGS="$AM_TEST_CFLAGS -Wno-unused-but-set-variable"],
+		[AC_MSG_RESULT([no])])
+
+AC_SUBST(AM_TEST_CFLAGS)
+
+AC_MSG_NOTICE()
+AC_MSG_NOTICE(Configuration is:)
+AC_MSG_NOTICE()
+AC_MSG_NOTICE(General:)
+
+################################
+# Build roxml binary
+################################
+AC_ARG_ENABLE(roxml,
+              [AS_HELP_STRING([--disable-roxml],
+              [Disable roxml binary build [default=yes]])],
+              [],
+              [enable_roxml=yes])
+AM_CONDITIONAL(ENABLE_ROXML,test x$enable_roxml != xno)
+
+AC_MSG_NOTICE(Roxml shell parser    ......... $enable_roxml)
+
+################################
+# Documentation
+################################
+AC_ARG_ENABLE(docs,
+              [AS_HELP_STRING([--enable-docs],
+              [Enable documentation build [default=no]])],
+              [],
+              [enable_docs=no])
+AM_CONDITIONAL(DOCS,test x$enable_docs != xno)
+if test x$enable_docs != xno; then
+    AC_PATH_PROG([DOXYGEN], [doxygen])
+    if test x$DOXYGEN = x; then
+        AC_MSG_ERROR([doxygen not found: the docs cannot be built])
+    fi
+fi
+
+AC_MSG_NOTICE(Documentation         ......... $enable_docs)
+
+################################
+# Build unit tests
+################################
+AC_ARG_ENABLE(tests,
+	      [AS_HELP_STRING([--enable-tests],
+	      [Enable unit tests build (only available from git repository)[default=no]])],
+	      [],
+	      [enable_tests=no])
+if test x$enable_tests != xno; then
+	AC_CHECK_FILE(unittest/unittest.c, , enable_tests=no)
+fi
+AM_CONDITIONAL(ENABLE_TESTS,test x$enable_tests != xno)
+
+AC_MSG_NOTICE(Unittests             ......... $enable_tests)
+
+################################
+# Fuse helper
+################################
+AC_ARG_WITH(fuse,
+              [AS_HELP_STRING([--with-fuse],
+              [Build fuse helper [default=no]])],
+              [],
+              [with_fuse=no])
+AM_CONDITIONAL(WITH_FUSE,test x$with_fuse = xyes)
+if test x$with_fuse = xyes; then
+    AC_CHECK_HEADERS([fuse.h],
+                     [
+                     PKG_CHECK_MODULES([FUSE], [fuse], [], [
+                         AC_SEARCH_LIBS([fuse_main], [fuse], [], [
+                             AC_MSG_ERROR([unable to find the fuse library])
+                         ])
+                     ])
+                     ],
+                     AC_MSG_ERROR([fuse.h not found: the fuse xml helper cannot be built]),
+                     [
+#define _FILE_OFFSET_BITS 64
+#include <fuse.h>
+                     ]
+    )
+fi
+
+AC_MSG_NOTICE(Fuse module           ......... $with_fuse)
+
+################################
+# Debugging options
+################################
+AC_ARG_ENABLE(debug,
+              [AS_HELP_STRING([--enable-debug],
+              [Turn on debugging [default=no]])],
+              [],
+              [enable_debug=no])
+AM_CONDITIONAL(DEBUG,test x$enable_debug = xyes)
+
+AC_MSG_NOTICE(Debug                 ......... $enable_debug)
+
+################################
+# Tune options
+################################
+AC_MSG_NOTICE()
+AC_MSG_NOTICE(Tuning:)
+
+AC_DEFUN([AC_ROXML_TUNE],
+[
+    AC_ARG_ENABLE($1,
+                  [AS_HELP_STRING([$3],
+                  [$4 [default=$2]])],
+                  [
+                      if test x$enableval = xno; then
+                          $1=no
+                      else
+                          $1=yes
+                      fi
+                  ],
+                  [$1=$2]
+    )
+    if test x$$1 != xno; then
+        roxml_tune=1
+	AC_MSG_NOTICE([$6 ......... $7])
+    else
+        roxml_tune=0
+	AC_MSG_NOTICE([$6 ......... $8])
+    fi
+    AC_DEFINE_UNQUOTED([$5], [$roxml_tune], [$4 [default=$2]])
+])
+
+# CONFIG_XML_THREAD_SAFE
+AC_ROXML_TUNE(xml_thread_safe,
+              [yes],
+              [--disable-xml-thread-safe],
+              [Is the target library thread safe or not.],
+              [CONFIG_XML_THREAD_SAFE],
+	      Thread safety        ,yes,no)
+
+# CONFIG_XML_HEAP_BUFFERS
+AC_ROXML_TUNE(xml_heap_buffers,
+              [no],
+              [--enable-xml-heap-buffers],
+              [Is the target library uses stack for internal buffers or heap. This is not compatible with thread safety.],
+              [CONFIG_XML_HEAP_BUFFERS],
+	      Buffers type         ,stack,heap)
+
+# CONFIG_XML_SMALL_BUFFER
+AC_ROXML_TUNE(xml_small_buffer,
+              [no],
+              [--enable-xml-small-buffer],
+              [Define the size of internal buffer. For very small systems, large internal buffers can cause the systeml the behave strangely.],
+              [CONFIG_XML_SMALL_BUFFER],
+	      Internal buffers     ,small,standard)
+
+# CONFIG_XML_SMALL_INPUT_FILE
+AC_ROXML_TUNE(xml_small_input_file,
+              [no],
+              [--enable-xml-small-input-file],
+              [Limit the size of input XML libroxml can handle to 64kb instead of 4Gb. Setting this option will reduce the size of RAM loaded tree.],
+              [CONFIG_XML_SMALL_INPUT_FILE],
+	      Input file           ,small (< 64kB),large (> 64kB))
+
+# CONFIG_XML_READ_WRITE
+AC_ROXML_TUNE(xml_read_write,
+              [yes],
+              [--disable-xml-read-write],
+              [Can the target library modify XML tree. When set to 0, this result in smaller binary (this saves about 3kb).],
+              [CONFIG_XML_READ_WRITE],
+	      Write support        ,yes,no)
+
+# CONFIG_XML_COMMIT_XML_TREE
+AC_ROXML_TUNE(xml_commit_xml_tree,
+              [yes],
+              [--disable-xml-commit-xml-tree],
+              [Can the target library commit a tree. When set to 0, this result in smaller binary (this saves about 5kb).],
+              [CONFIG_XML_COMMIT_XML_TREE],
+	      Commit support       ,yes,no)
+
+# CONFIG_XML_XPATH_ENGINE
+AC_ROXML_TUNE(xml_xpath_engine,
+              [yes],
+              [--disable-xml-xpath-engine],
+              [Can the target library perform xpath queries. When set to 0, this result in smaller binary (this saves about 20kb).],
+              [CONFIG_XML_XPATH_ENGINE],
+	      Xpath support        ,yes,no)
+
+################################
+# Output files
+################################
+AC_MSG_NOTICE()
+AC_CONFIG_FILES(Makefile libroxml.pc docs/doxy.cfg docs/man.cfg src/roxml-doxy.h)
+AC_OUTPUT
diff --git a/Libs/libroxml-2.3.0/data/html/doxygen.css b/Libs/libroxml-2.3.0/data/html/doxygen.css
new file mode 100644
index 0000000000000000000000000000000000000000..b081352e2c10d850aa26066545604a911fe0dc36
--- /dev/null
+++ b/Libs/libroxml-2.3.0/data/html/doxygen.css
@@ -0,0 +1,889 @@
+/* The standard CSS for doxygen */
+
+body, table, div, p, dl {
+	font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif;
+	font-size: 12px;
+}
+
+.api table {
+	border: 1px #A3B4D7;
+	width: 90%;
+	margin: 5%;
+}
+
+.api tr {
+	border: 1px solid #a3b4d7;
+}
+
+.api td {
+	border: 1px solid #a3b4d7;
+	text-align: top;
+	vertical-align: top;
+}
+
+.xpath table {
+	border-width:0px;
+	width: 90%;
+	margin: 5%;
+}
+
+.xpath tr {
+	border-width:0px;
+}
+
+.xpath td {
+	width: 50%;
+	border-width: 0px;
+	text-align: top;
+	vertical-align: top;
+}
+
+/* @group Heading Levels */
+
+h1 {
+	font-size: 150%;
+}
+
+.title {
+	font-size: 26px;
+	font-weight: bold;
+	text-align: center;
+	margin: 10px 2px;
+}
+
+h2 {
+	font-size: 16px;
+	padding-top:  4px;
+	padding-bottom:  4px;
+	margin-top:  20px;
+	margin-bottom:  20px;
+        background-image:url('nav_h.png');
+        background-repeat:repeat-x;
+	background-color: #F9FAFC;
+}
+
+h3 {
+	font-size: 100%;
+}
+
+dt {
+	font-weight: bold;
+}
+
+div.multicol {
+	-moz-column-gap: 1em;
+	-webkit-column-gap: 1em;
+	-moz-column-count: 3;
+	-webkit-column-count: 3;
+}
+
+p.startli, p.startdd, p.starttd {
+	margin-top: 2px;
+}
+
+p.endli {
+	margin-bottom: 0px;
+}
+
+p.enddd {
+	margin-bottom: 4px;
+}
+
+p.endtd {
+	margin-bottom: 2px;
+}
+
+/* @end */
+
+caption {
+	font-weight: bold;
+}
+
+span.legend {
+        font-size: 70%;
+        text-align: center;
+}
+
+h3.version {
+        font-size: 90%;
+        text-align: center;
+}
+
+div.qindex, div.navtab{
+	background-color: #EBEFF6;
+	border: 1px solid #A3B4D7;
+	text-align: center;
+	margin: 2px;
+	padding: 2px;
+}
+
+div.qindex, div.navpath {
+	width: 100%;
+	line-height: 140%;
+}
+
+div.navtab {
+	margin-right: 15px;
+}
+
+/* @group Link Styling */
+
+a {
+	color: #3D578C;
+	font-weight: normal;
+	text-decoration: none;
+}
+
+.textblock {
+	margin-left: 50px;
+	margin-right: 50px;
+	padding-left: 50px;
+	padding-right: 50px;
+	text-align: justify;
+}
+
+.contents a:visited {
+	color: #4665A2;
+}
+
+a:hover {
+	text-decoration: underline;
+}
+
+a.qindex {
+	font-weight: bold;
+}
+
+a.qindexHL {
+	font-weight: bold;
+	background-color: #9CAFD4;
+	color: #ffffff;
+	border: 1px double #869DCA;
+}
+
+.contents a.qindexHL:visited {
+        color: #ffffff;
+}
+
+a.el {
+	font-weight: bold;
+}
+
+a.elRef {
+}
+
+a.code {
+	color: #4665A2;
+}
+
+a.codeRef {
+	color: #4665A2;
+}
+
+/* @end */
+
+dl.el {
+	margin-left: -1cm;
+}
+
+.fragment {
+	font-family: monospace, fixed;
+	font-size: 100%;
+}
+
+pre.fragment {
+	padding: 4px 6px;
+	margin: 4px 8px 4px 2px;
+	overflow: auto;
+	word-wrap: break-word;
+	font-size:  9pt;
+	line-height: 125%;
+}
+
+div.ah {
+	background-color: black;
+	font-weight: bold;
+	color: #ffffff;
+	margin-bottom: 3px;
+	margin-top: 3px;
+	padding: 0.2em;
+	border: solid thin #333;
+	border-radius: 0.5em;
+	-webkit-border-radius: .5em;
+	-moz-border-radius: .5em;
+	box-shadow: 2px 2px 3px #999;
+	-webkit-box-shadow: 2px 2px 3px #999;
+	-moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px;
+	background-image: -webkit-gradient(linear, left top, left bottom, from(#eee), to(#000),color-stop(0.3, #444));
+	background-image: -moz-linear-gradient(center top, #eee 0%, #444 40%, #000);
+}
+
+div.groupHeader {
+	margin-left: 16px;
+	margin-top: 12px;
+	font-weight: bold;
+}
+
+div.groupText {
+	margin-left: 16px;
+	font-style: italic;
+}
+
+body {
+	background: white;
+	color: black;
+        margin: 0;
+}
+
+div.contents {
+	margin-top: 10px;
+	margin-left: 10px;
+	margin-right: 5px;
+}
+
+td.indexkey {
+	background-color: #EBEFF6;
+	font-weight: bold;
+	border: 1px solid #C4CFE5;
+	margin: 2px 0px 2px 0;
+	padding: 2px 10px;
+}
+
+td.indexvalue {
+	background-color: #EBEFF6;
+	border: 1px solid #C4CFE5;
+	padding: 2px 10px;
+	margin: 2px 0px;
+}
+
+tr.memlist {
+	background-color: #EEF1F7;
+}
+
+p.formulaDsp {
+	text-align: center;
+}
+
+img.formulaDsp {
+	
+}
+
+img.formulaInl {
+	vertical-align: middle;
+}
+
+div.center {
+	text-align: center;
+        margin-top: 0px;
+        margin-bottom: 0px;
+        padding: 0px;
+}
+
+div.center img {
+	border: 0px;
+}
+
+address.footer {
+	text-align: right;
+	padding-right: 12px;
+}
+
+img.footer {
+	border: 0px;
+	vertical-align: middle;
+}
+
+/* @group Code Colorization */
+
+span.keyword {
+	color: #008000
+}
+
+span.keywordtype {
+	color: #604020
+}
+
+span.keywordflow {
+	color: #e08000
+}
+
+span.comment {
+	color: #800000
+}
+
+span.preprocessor {
+	color: #806020
+}
+
+span.stringliteral {
+	color: #002080
+}
+
+span.charliteral {
+	color: #008080
+}
+
+span.vhdldigit { 
+	color: #ff00ff 
+}
+
+span.vhdlchar { 
+	color: #000000 
+}
+
+span.vhdlkeyword { 
+	color: #700070 
+}
+
+span.vhdllogic { 
+	color: #ff0000 
+}
+
+/* @end */
+
+/*
+.search {
+	color: #003399;
+	font-weight: bold;
+}
+
+form.search {
+	margin-bottom: 0px;
+	margin-top: 0px;
+}
+
+input.search {
+	font-size: 75%;
+	color: #000080;
+	font-weight: normal;
+	background-color: #e8eef2;
+}
+*/
+
+td.tiny {
+	font-size: 75%;
+}
+
+.dirtab {
+	padding: 4px;
+	border-collapse: collapse;
+	border: 1px solid #A3B4D7;
+}
+
+th.dirtab {
+	background: #EBEFF6;
+	font-weight: bold;
+}
+
+hr {
+	height: 0px;
+	border: none;
+	border-top: 1px solid #4A6AAA;
+}
+
+hr.footer {
+	height: 1px;
+}
+
+/* @group Member Descriptions */
+
+table.memberdecls {
+	border-spacing: 0px;
+	padding: 0px;
+}
+
+.mdescLeft, .mdescRight,
+.memItemLeft, .memItemRight,
+.memTemplItemLeft, .memTemplItemRight, .memTemplParams {
+	background-color: #F9FAFC;
+	border: none;
+	margin: 4px;
+	padding: 1px 0 0 8px;
+}
+
+.mdescLeft, .mdescRight {
+	padding: 0px 8px 4px 8px;
+	color: #555;
+}
+
+.memItemLeft, .memItemRight, .memTemplParams {
+	border-top: 1px solid #C4CFE5;
+}
+
+.memItemLeft, .memTemplItemLeft {
+        white-space: nowrap;
+}
+
+.memItemRight {
+	width: 100%;
+}
+
+.memTemplParams {
+	color: #4665A2;
+        white-space: nowrap;
+}
+
+/* @end */
+
+/* @group Member Details */
+
+/* Styles for detailed member documentation */
+
+.memtemplate {
+	font-size: 80%;
+	color: #4665A2;
+	font-weight: normal;
+	margin-left: 9px;
+}
+
+.memnav {
+	background-color: #EBEFF6;
+	border: 1px solid #A3B4D7;
+	text-align: center;
+	margin: 2px;
+	margin-right: 15px;
+	padding: 2px;
+}
+
+.mempage {
+	width: 100%;
+}
+
+.memitem {
+	padding: 0;
+	margin-bottom: 10px;
+	margin-right: 5px;
+}
+
+.memname {
+        white-space: nowrap;
+        font-weight: bold;
+        margin-left: 6px;
+}
+
+.memproto {
+        border-top: 1px solid #A8B8D9;
+        border-left: 1px solid #A8B8D9;
+        border-right: 1px solid #A8B8D9;
+        padding: 6px 0px 6px 0px;
+        color: #253555;
+        font-weight: bold;
+        text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9);
+        /* opera specific markup */
+        box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        border-top-right-radius: 8px;
+        border-top-left-radius: 8px;
+        /* firefox specific markup */
+        -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
+        -moz-border-radius-topright: 8px;
+        -moz-border-radius-topleft: 8px;
+        /* webkit specific markup */
+        -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        -webkit-border-top-right-radius: 8px;
+        -webkit-border-top-left-radius: 8px;
+        background-image:url('nav_f.png');
+        background-repeat:repeat-x;
+        background-color: #E2E8F2;
+
+}
+
+.memdoc {
+        border-bottom: 1px solid #A8B8D9;      
+        border-left: 1px solid #A8B8D9;      
+        border-right: 1px solid #A8B8D9; 
+        padding: 2px 5px;
+        background-color: #FBFCFD;
+        border-top-width: 0;
+        /* opera specific markup */
+        border-bottom-left-radius: 8px;
+        border-bottom-right-radius: 8px;
+        box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        /* firefox specific markup */
+        -moz-border-radius-bottomleft: 8px;
+        -moz-border-radius-bottomright: 8px;
+        -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
+        background-image: -moz-linear-gradient(center top, #FFFFFF 0%, #FFFFFF 60%, #F7F8FB 95%, #EEF1F7);
+        /* webkit specific markup */
+        -webkit-border-bottom-left-radius: 8px;
+        -webkit-border-bottom-right-radius: 8px;
+        -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        background-image: -webkit-gradient(linear,center top,center bottom,from(#FFFFFF), color-stop(0.6,#FFFFFF), color-stop(0.60,#FFFFFF), color-stop(0.95,#F7F8FB), to(#EEF1F7));
+}
+
+.paramkey {
+	text-align: right;
+}
+
+.paramtype {
+	white-space: nowrap;
+}
+
+.paramname {
+	color: #602020;
+	white-space: nowrap;
+}
+.paramname em {
+	font-style: normal;
+}
+
+.params, .retval, .exception, .tparams {
+        border-spacing: 6px 2px;
+}       
+
+.params .paramname, .retval .paramname {
+        font-weight: bold;
+        vertical-align: top;
+}
+        
+.params .paramtype {
+        font-style: italic;
+        vertical-align: top;
+}       
+        
+.params .paramdir {
+        font-family: "courier new",courier,monospace;
+        vertical-align: top;
+}
+
+
+
+
+/* @end */
+
+/* @group Directory (tree) */
+
+/* for the tree view */
+
+.ftvtree {
+	font-family: sans-serif;
+	margin: 0px;
+}
+
+/* these are for tree view when used as main index */
+
+.directory {
+	font-size: 9pt;
+	font-weight: bold;
+	margin: 5px;
+}
+
+.directory h3 {
+	margin: 0px;
+	margin-top: 1em;
+	font-size: 11pt;
+}
+
+/*
+The following two styles can be used to replace the root node title
+with an image of your choice.  Simply uncomment the next two styles,
+specify the name of your image and be sure to set 'height' to the
+proper pixel height of your image.
+*/
+
+/*
+.directory h3.swap {
+	height: 61px;
+	background-repeat: no-repeat;
+	background-image: url("yourimage.gif");
+}
+.directory h3.swap span {
+	display: none;
+}
+*/
+
+.directory > h3 {
+	margin-top: 0;
+}
+
+.directory p {
+	margin: 0px;
+	white-space: nowrap;
+}
+
+.directory div {
+	display: none;
+	margin: 0px;
+}
+
+.directory img {
+	vertical-align: -30%;
+}
+
+/* these are for tree view when not used as main index */
+
+.directory-alt {
+	font-size: 100%;
+	font-weight: bold;
+}
+
+.directory-alt h3 {
+	margin: 0px;
+	margin-top: 1em;
+	font-size: 11pt;
+}
+
+.directory-alt > h3 {
+	margin-top: 0;
+}
+
+.directory-alt p {
+	margin: 0px;
+	white-space: nowrap;
+}
+
+.directory-alt div {
+	display: none;
+	margin: 0px;
+}
+
+.directory-alt img {
+	vertical-align: -30%;
+}
+
+/* @end */
+
+div.dynheader {
+        margin-top: 8px;
+}
+
+address {
+	font-style: normal;
+	color: #2A3D61;
+}
+
+table.doxtable {
+	border-collapse:collapse;
+}
+
+table.doxtable td, table.doxtable th {
+	border: 1px solid #2D4068;
+	padding: 3px 7px 2px;
+}
+
+table.doxtable th {
+	background-color: #374F7F;
+	color: #FFFFFF;
+	font-size: 110%;
+	padding-bottom: 4px;
+	padding-top: 5px;
+	text-align:left;
+}
+
+.tabsearch {
+	top: 0px;
+	left: 10px;
+	height: 36px;
+	background-image: url('tab_b.png');
+	z-index: 101;
+	overflow: hidden;
+	font-size: 13px;
+}
+
+.navpath ul
+{
+	font-size: 11px;
+	background-image:url('tab_b.png');
+	background-repeat:repeat-x;
+	height:30px;
+	line-height:30px;
+	color:#8AA0CC;
+	border:solid 1px #C2CDE4;
+	overflow:hidden;
+	margin:0px;
+	padding:0px;
+}
+
+.navpath li
+{
+	list-style-type:none;
+	float:left;
+	padding-left:10px;
+	padding-right:15px;
+	background-image:url('bc_s.png');
+	background-repeat:no-repeat;
+	background-position:right;
+	color:#364D7C;
+}
+
+.navpath li.navelem a
+{
+	height:32px;
+	display:block;
+	text-decoration: none;
+	outline: none;
+}
+
+.navpath li.navelem a:hover
+{
+	color:#6884BD;
+}
+
+.navpath li.footer
+{
+        list-style-type:none;
+        float:right;
+        padding-left:10px;
+        padding-right:15px;
+        background-image:none;
+        background-repeat:no-repeat;
+        background-position:right;
+        color:#364D7C;
+        font-size: 8pt;
+}
+
+
+div.summary
+{
+	float: right;
+	font-size: 8pt;
+	padding-right: 5px;
+	width: 50%;
+	text-align: right;
+}       
+
+div.summary a
+{
+	white-space: nowrap;
+}
+
+div.ingroups
+{
+	font-size: 8pt;
+	padding-left: 5px;
+	width: 50%;
+	text-align: left;
+}
+
+div.ingroups a
+{
+	white-space: nowrap;
+}
+
+div.header
+{
+	margin:  0px;
+	border-bottom: 1px solid #C4CFE5;
+}
+
+div.headertitle
+{
+	padding: 5px 5px 5px 10px;
+}
+
+dl
+{
+        padding: 0 0 0 10px;
+}
+
+dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug
+{
+        border-left:4px solid;
+        padding: 0 0 0 6px;
+}
+
+dl.note
+{
+        border-color: #D0C000;
+}
+
+dl.warning, dl.attention
+{
+        border-color: #FF0000;
+}
+
+dl.pre, dl.post, dl.invariant
+{
+        border-color: #00D000;
+}
+
+dl.deprecated
+{
+        border-color: #505050;
+}
+
+dl.todo
+{
+        border-color: #00C0E0;
+}
+
+dl.test
+{
+        border-color: #3030E0;
+}
+
+dl.bug
+{
+        border-color: #C08050;
+}
+
+#projectlogo
+{
+	text-align: center;
+	vertical-align: bottom;
+	border-collapse: separate;
+}
+ 
+#projectlogo img
+{ 
+	border: 0px none;
+}
+ 
+#projectname
+{
+	background: #fff;
+	font: 48px Tahoma, Arial,sans-serif;
+	margin: 0px;
+	padding: 2px 0px;
+}
+    
+#projectbrief
+{
+	background: #fff;
+	font: 120% Tahoma, Arial,sans-serif;
+	margin: 0px;
+	padding: 0px;
+}
+
+#projectnumber
+{
+	background: #fff;
+	font: 50% Tahoma, Arial,sans-serif;
+	margin: 0px;
+	padding: 0px;
+}
+
+#titlearea
+{
+	padding-top: 87px;
+	padding-bottom: 7px;
+	margin: 0px;
+	width: 100%;
+	border-bottom: 1px solid #5373B4;
+	background: url("libroxml-ex.png");
+	background-repeat: no-repeat;
+}
+
+#titlearea table 
+{
+}
+
+.image
+{
+        text-align: center;
+}
+
+.dotgraph
+{
+        text-align: center;
+}
+
+.mscgraph
+{
+        text-align: center;
+}
+
+.caption
+{
+	font-weight: bold;
+}
+
diff --git a/Libs/libroxml-2.3.0/data/html/libroxml-footer.html b/Libs/libroxml-2.3.0/data/html/libroxml-footer.html
new file mode 100644
index 0000000000000000000000000000000000000000..7ea6e1bdc823daac8898cf0a1c92f06b279458ec
--- /dev/null
+++ b/Libs/libroxml-2.3.0/data/html/libroxml-footer.html
@@ -0,0 +1,14 @@
+<!--BEGIN GENERATE_TREEVIEW-->
+    <li class="footer">Generated on $datetime for $projectname by 
+    <a href="http://www.doxygen.org/index.html">
+    <img class="footer" src="doxygen.png" alt="doxygen"/></a> $doxygenversion </li>
+   </ul>
+ </div>
+<!--END GENERATE_TREEVIEW-->
+<!--BEGIN !GENERATE_TREEVIEW-->
+<hr class="footer"/><address class="footer"><small>
+Generated on $datetime for $projectname by&#160;<a href="http://www.doxygen.org/index.html"><img class="footer" src="$relpath$doxygen.png" alt="doxygen"/></a> $doxygenversion</small></address>
+<!--END !GENERATE_TREEVIEW-->
+
+</body>
+</html>
diff --git a/Libs/libroxml-2.3.0/data/html/libroxml-header.html b/Libs/libroxml-2.3.0/data/html/libroxml-header.html
new file mode 100644
index 0000000000000000000000000000000000000000..1619709d9e7d6dccd0c06b9b24aec88dffa5acff
--- /dev/null
+++ b/Libs/libroxml-2.3.0/data/html/libroxml-header.html
@@ -0,0 +1,71 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
+<meta name="author" content="Tristan Lelong" /> 
+<meta name="description" content="libroxml is a light powerfull C xml parsing library" /> 
+<meta name="keywords" content="libroxml c library xml lgpg fuse light powerfull fast small" /> 
+<title>$title</title>
+<link href="$relpath$tabs.css" rel="stylesheet" type="text/css"/>
+<link href="$relpath$doxygen.css" rel="stylesheet" type="text/css" />
+$treeview
+$search
+$mathjax
+</head>
+<body>
+
+<!-- Google analytics -->
+<script type="text/javascript">
+
+var _gaq = _gaq || [];
+_gaq.push(['_setAccount', 'UA-7043483-4']);
+_gaq.push(['_setDomainName', 'libroxml.net']);
+_gaq.push(['_setAllowLinker', true]);
+_gaq.push(['_trackPageview']);
+
+(function() {
+ var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
+ ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
+ var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
+ })();
+
+</script>
+
+<div id="top"><!-- do not remove this div! -->
+<!--BEGIN TITLEAREA-->
+<div id="titlearea" align="center">
+<table cellspacing="0" cellpadding="0">
+ <tbody>
+ <tr style="height: 56px;">
+  <!--BEGIN PROJECT_LOGO-->
+  <td id="projectlogo"><img alt="Logo" src="roxml.png"></td>
+  <!--END PROJECT_LOGO-->
+  <!--BEGIN PROJECT_NAME-->
+  <td style="padding-left: 0.5em;">
+   <div id="projectname">&lt;$projectname
+   <!--BEGIN PROJECT_NUMBER-->&#160;<span id="projectnumber">version="$projectnumber"</span><!--END PROJECT_NUMBER-->
+   /&gt;</div>
+   <!--BEGIN PROJECT_BRIEF--><div id="projectbrief">$projectbrief</div><!--END PROJECT_BRIEF-->
+  </td>
+  <!--END PROJECT_NAME-->
+  <!--BEGIN !PROJECT_NAME-->
+   <!--BEGIN PROJECT_BRIEF-->
+    <td style="padding-left: 0.5em;">
+    <div id="projectbrief">$projectbrief</div>
+    </td>
+   <!--END PROJECT_BRIEF-->
+  <!--END !PROJECT_NAME-->
+  <!--BEGIN DISABLE_INDEX-->
+   <!--BEGIN SEARCHENGINE-->
+   <td>$searchbox</td>
+   <!--END SEARCHENGINE-->
+  <!--END DISABLE_INDEX-->
+ </tr>
+ </tbody>
+</table>
+<div align="right" style="padding-right:20px;">
+contact: <a href="mailto:tristan.lelong@libroxml.net">tristan.lelong@libroxml.net</a>
+</div>
+</div>
+<!--END TITLEAREA-->
+
diff --git a/Libs/libroxml-2.3.0/data/icons/libroxml-ex.png b/Libs/libroxml-2.3.0/data/icons/libroxml-ex.png
new file mode 100644
index 0000000000000000000000000000000000000000..f7f4b7d82d6bb3f27c7aa34470c36bbcb37a3333
Binary files /dev/null and b/Libs/libroxml-2.3.0/data/icons/libroxml-ex.png differ
diff --git a/Libs/libroxml-2.3.0/data/icons/roxml.png b/Libs/libroxml-2.3.0/data/icons/roxml.png
new file mode 100644
index 0000000000000000000000000000000000000000..98c76eaa460aca8754288e0e56c1f724b35b7c93
Binary files /dev/null and b/Libs/libroxml-2.3.0/data/icons/roxml.png differ
diff --git a/Libs/libroxml-2.3.0/data/icons/roxml.svg b/Libs/libroxml-2.3.0/data/icons/roxml.svg
new file mode 100644
index 0000000000000000000000000000000000000000..ebcf3bb7d33d5b824686bc669c0883d2effb4248
--- /dev/null
+++ b/Libs/libroxml-2.3.0/data/icons/roxml.svg
@@ -0,0 +1,384 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:xlink="http://www.w3.org/1999/xlink"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="210mm"
+   height="297mm"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.46"
+   sodipodi:docname="roxml.svg"
+   inkscape:output_extension="org.inkscape.output.svg.inkscape"
+   inkscape:export-filename="/home/tristan/Documents/pers/svn:libroxml/roxml.png"
+   inkscape:export-xdpi="17.091816"
+   inkscape:export-ydpi="17.091816">
+  <defs
+     id="defs4">
+    <marker
+       inkscape:stockid="Arrow1Lstart"
+       orient="auto"
+       refY="0.0"
+       refX="0.0"
+       id="Arrow1Lstart"
+       style="overflow:visible">
+      <path
+         id="path11690"
+         d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z "
+         style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;marker-start:none"
+         transform="scale(0.8) translate(12.5,0)" />
+    </marker>
+    <linearGradient
+       id="linearGradient11559">
+      <stop
+         style="stop-color:#e7f9f8;stop-opacity:1;"
+         offset="0"
+         id="stop11561" />
+      <stop
+         style="stop-color:#0066ff;stop-opacity:1"
+         offset="1"
+         id="stop11563" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient11456">
+      <stop
+         style="stop-color:#008000;stop-opacity:1;"
+         offset="0"
+         id="stop11458" />
+      <stop
+         style="stop-color:#008000;stop-opacity:0;"
+         offset="1"
+         id="stop11460" />
+    </linearGradient>
+    <inkscape:perspective
+       sodipodi:type="inkscape:persp3d"
+       inkscape:vp_x="0 : 526.18109 : 1"
+       inkscape:vp_y="0 : 1000 : 0"
+       inkscape:vp_z="744.09448 : 526.18109 : 1"
+       inkscape:persp3d-origin="372.04724 : 350.78739 : 1"
+       id="perspective10" />
+    <filter
+       inkscape:collect="always"
+       id="filter3381"
+       x="-0.068882026"
+       width="1.1377641"
+       y="-0.38407814"
+       height="1.7681563">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="12.205918"
+         id="feGaussianBlur3383" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3389">
+      <path
+         style="fill:#502d16;stroke:none;stroke-width:3.5999999;stroke-miterlimit:4;stroke-opacity:1"
+         d="M 510,557.3622 L 567.42366,596.41119 L 468.33739,599.03643 L 422.85778,594.37492 C 399.7671,595.05607 378.10499,587.16579 355.01431,587.84695 L 293.98598,598.17651 L 217.33905,603.2717 L 142.14285,610.57648 L 203.0098,559.26423 L 274.75987,547.59651 L 356.31374,534.30501 L 427.4019,544.76459 L 510,557.3622 z"
+         id="path3391"
+         sodipodi:nodetypes="ccccccccccccc" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient11456"
+       id="linearGradient11551"
+       gradientUnits="userSpaceOnUse"
+       x1="357.85715"
+       y1="504.76184"
+       x2="352.14282"
+       y2="328.06372"
+       gradientTransform="translate(-37.857143,-3.5714286)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient11559"
+       id="linearGradient11565"
+       x1="401.72394"
+       y1="590.93359"
+       x2="422.26062"
+       y2="429.50504"
+       gradientUnits="userSpaceOnUse" />
+    <filter
+       inkscape:collect="always"
+       id="filter11671">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="7.8261122"
+         id="feGaussianBlur11673" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3284">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.60315818"
+         id="feGaussianBlur3286" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3288">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.60315818"
+         id="feGaussianBlur3290" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3292">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.60315818"
+         id="feGaussianBlur3294" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3296">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.60315818"
+         id="feGaussianBlur3298" />
+    </filter>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.98994949"
+     inkscape:cx="428.08307"
+     inkscape:cy="565.85507"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     showgrid="false"
+     inkscape:window-width="1440"
+     inkscape:window-height="827"
+     inkscape:window-x="0"
+     inkscape:window-y="25" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Calque 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     style="display:inline">
+    <path
+       transform="matrix(1,0,0.1449175,1,-250.93198,-39.285714)"
+       style="fill:url(#linearGradient11565);stroke:none;stroke-width:3.59999989999999981;stroke-miterlimit:4;stroke-opacity:1;fill-opacity:1;filter:url(#filter11671)"
+       d="M 423.59881,510.89027 L 431.35771,515.07192 L 439.31735,516.23952 L 442.83637,517.14491 L 453.16058,522.69609 L 467.32115,534.45788 L 491.49983,540.4859 L 530.42567,527.80688 L 533.07889,523.67192 L 538.82016,518.78446 L 550.47219,510.59354 L 555.79123,504.60746 L 564.49781,490.37667 L 574.91332,466.88298 L 597.8492,454.51991 L 600.98135,424.66334 L 688.58756,632.2085 L 636.60794,592.61992 L 486.87858,569.98107 L 330.81436,593.66568 L 253.75956,653.20259 L 397.15615,421.72517 L 389.09834,456.8286 L 393.06569,465.06732 L 410.97616,468.60978 L 417.05048,475.01461 L 418.65189,496.21565 L 423.59881,510.89027 z"
+       id="path11554"
+       sodipodi:nodetypes="cccccccccccccccccccccccccccc" />
+    <path
+       sodipodi:nodetypes="ccccccccccccc"
+       id="path3335"
+       d="M 502.85715,540.21935 L 560.28081,579.26834 L 461.19454,581.89358 L 415.71493,577.23207 C 392.62425,577.91322 370.96214,570.02294 347.87146,570.7041 L 286.84313,581.03366 L 210.1962,586.12885 L 135,593.43363 L 195.86695,542.12138 L 267.61702,530.45366 L 349.17089,517.16216 L 420.25905,527.62174 L 502.85715,540.21935 z"
+       style="fill:#502d16;stroke:none;stroke-width:3.5999999;stroke-miterlimit:4;stroke-opacity:1;filter:url(#filter3381)"
+       clip-path="url(#clipPath3389)"
+       transform="translate(-37.857143,-3.5714286)" />
+    <path
+       sodipodi:nodetypes="csssssssssssc"
+       id="path2471"
+       d="M 413.57143,411.29076 C 413.18009,420.98822 393.21228,423.23883 391.05015,430.82895 C 385.47492,450.40067 384.68799,455.70397 376.00951,468.74921 C 372.85494,473.49109 362.38887,477.42762 357.79142,485.81731 C 354.03723,492.66814 344.16246,493.43733 339.18082,495.70274 C 323.25239,502.94622 318.0792,500.93362 308.21428,500.93362 C 296.49323,500.93362 272.76943,476.48203 261.83908,477.01972 C 237.50903,478.21657 239.69493,445.73504 233.24813,435.04749 C 225.09914,421.53803 203.57143,434.63248 203.57143,412.71933 C 203.57143,388.99182 213.2739,356.01406 231.37122,340.15409 C 250.41375,323.46576 278.59782,324.50504 308.21428,324.50504 C 327.37948,324.50504 351.06093,325.28418 366.51523,332.87694 C 397.63936,348.16833 413.57143,378.7528 413.57143,411.29076 z"
+       style="fill:url(#linearGradient11551);stroke:none;stroke-width:3.59999989999999981;stroke-miterlimit:4;stroke-opacity:1;" />
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;opacity:1;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3292);font-family:Bitstream Vera Sans"
+       x="264.99997"
+       y="530.93359"
+       id="text2383"
+       transform="matrix(1.6613822,0,0,1.0667784,-212.20788,-34.48253)"><tspan
+         sodipodi:role="line"
+         id="tspan2385"
+         x="264.99997"
+         y="530.93359">R</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;opacity:1;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3296);font-family:Bitstream Vera Sans"
+       x="286.42856"
+       y="530.93365"
+       id="text2387"
+       transform="matrix(1.6613822,0,0,1.0667784,-212.20788,-34.48253)"><tspan
+         sodipodi:role="line"
+         id="tspan2389"
+         x="286.42856"
+         y="530.93365">O</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-size:59.33319472999999533px;font-style:normal;font-weight:normal;fill:#2b0000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Bitstream Vera Sans"
+       x="453.47516"
+       y="370.45367"
+       id="text2391"
+       transform="scale(0.6741588,1.48333)"><tspan
+         sodipodi:role="line"
+         id="tspan2393"
+         x="453.47516"
+         y="370.45367">X</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;opacity:1;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3288);font-family:Bitstream Vera Sans"
+       x="321.42859"
+       y="530.93365"
+       id="text2395"
+       transform="matrix(1.6613822,0,0,1.0667784,-212.20788,-34.48253)"><tspan
+         sodipodi:role="line"
+         id="tspan2397"
+         x="321.42859"
+         y="530.93365">M</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-size:40px;font-style:normal;font-weight:normal;opacity:1;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3284);font-family:Bitstream Vera Sans"
+       x="350.71426"
+       y="530.93365"
+       id="text2399"
+       transform="matrix(1.6613822,0,0,1.0667784,-212.20788,-34.48253)"><tspan
+         sodipodi:role="line"
+         id="tspan2401"
+         x="350.71426"
+         y="530.93365">L</tspan></text>
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 313.8125,533.625 C 304.57771,558.84307 289.85448,564.70181 277.34375,564.4375 C 265.0322,564.1774 255.10095,557.9515 254.78125,557.75 L 254.78125,557.375 L 253.78125,557.375 L 253.78125,558.0625 L 253.78125,558.34375 L 254.03125,558.5 C 254.03125,558.5 264.46609,565.1661 277.3125,565.4375 C 290.15891,565.7089 310.71666,566.28348 314.75,533.96875 L 313.8125,533.625 z"
+       id="path2403"
+       sodipodi:nodetypes="csccccccscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 326.71875,545.53125 L 328.68163,550.6369 C 356.60675,569.61167 375.77971,569.9962 390.53125,569.90625 C 397.90702,569.86128 403.54918,568.63723 407.34375,567.40625 C 411.13832,566.17527 413.125,564.9375 413.125,564.9375 L 413.65625,564.59375 L 413.21875,564.15625 L 412.5,563.4375 L 411.78125,564.15625 L 412.03125,564.375 C 411.44041,564.71141 409.99893,565.47477 407.03125,566.4375 C 403.32582,567.63956 397.79834,568.86194 390.53125,568.90625 C 375.99708,568.99487 354.50793,564.41364 326.71875,545.53125 z"
+       id="path2405"
+       sodipodi:nodetypes="ccssccccccssc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 307.72462,547.40117 C 300.9133,567.47663 303.41676,583.80488 305.125,594.59375 C 306.83324,605.38262 310.28125,611.1875 310.28125,611.1875 L 310.84375,612.125 L 311.1875,611.09375 L 311.90625,608.9375 L 310.96875,608.625 L 310.65625,609.59375 C 309.9682,608.32067 307.58808,603.67804 306.125,594.4375 C 304.44038,583.7978 304.42739,568.17453 311.1875,548.25 L 307.72462,547.40117 z"
+       id="path2407"
+       sodipodi:nodetypes="csccccccscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 327.34375,548.75 C 326.29221,563.47151 312.88032,576.63254 299.625,586.0625 C 286.36968,595.49246 273.375,601.1875 273.375,601.1875 L 273.78125,602.09375 C 273.78125,602.09375 286.83568,596.37361 300.1875,586.875 C 313.53932,577.37639 330.28289,564.84858 331.37421,549.57011 L 327.34375,548.75 z"
+       id="path2409"
+       sodipodi:nodetypes="csccscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 352.4375,559.8125 L 347.29806,560.11992 C 360.81734,570.0815 372.63805,580.00466 376.53125,586.90625 C 380.42445,593.80784 380.9375,598.125 380.9375,598.125 L 381.9375,598.03125 C 381.9375,598.03125 381.37019,593.43324 377.40625,586.40625 C 373.44231,579.37926 366.06109,569.85094 352.4375,559.8125 z"
+       id="path2411"
+       sodipodi:nodetypes="ccsccsc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 302.53125,553.40625 C 273.19808,579.87763 263.84375,598.5625 263.84375,598.5625 L 264.71875,599 C 264.71875,599 277.23226,581.29957 306.4705,554.91386 L 302.53125,553.40625 z"
+       id="path2413"
+       sodipodi:nodetypes="ccccc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 323.15625,561.34375 C 311.30712,577.86072 311.42188,589.17412 314.625,596.3125 C 317.82812,603.45088 324.0625,606.375 324.0625,606.375 L 324.5,605.46875 C 324.5,605.46875 318.12473,602.88221 315.53125,595.90625 C 313.20884,589.65941 315.11531,580.42933 324.9789,562.69511 L 323.15625,561.34375 z"
+       id="path2415"
+       sodipodi:nodetypes="csccscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 203.625,402.59375 L 203.5,403.5625 C 203.5,403.5625 286.06265,414.24133 310.25,488.9375 L 312.19765,486.09962 C 287.81355,410.79581 203.625,402.59375 203.625,402.59375 z"
+       id="path2419"
+       sodipodi:nodetypes="ccccc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 415.6875,384 C 415.6875,384 411.95549,384.13196 405.96875,386 C 399.98201,387.86804 391.71857,391.49431 382.5625,398.40625 C 364.25035,412.23012 339.87631,438.77427 325.56837,491.71367 L 329.0625,492.5 C 343.32598,439.72511 365.03983,412.86362 383.15625,399.1875 C 392.21446,392.34944 400.36174,388.80606 406.25,386.96875 C 412.13826,385.13144 415.71875,385 415.71875,385 L 415.6875,384 z"
+       id="path2421"
+       sodipodi:nodetypes="cssccsscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 313.375,381.90625 C 313.375,381.90625 311.47573,382.72417 309.15625,385.375 C 306.83677,388.02583 304.03054,392.51944 302.09375,399.90625 C 298.22018,414.67988 295.68835,441.27282 308.91719,487.75254 L 311.90625,487.21875 C 298.70653,440.84132 299.2575,414.66834 303.0625,400.15625 C 304.965,392.90021 307.69448,388.55899 309.90625,386.03125 C 312.11802,383.50351 313.78125,382.8125 313.78125,382.8125 L 313.375,381.90625 z"
+       id="path2423"
+       sodipodi:nodetypes="cssccsscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 311.5625,357.59375 L 311.28125,358.5625 C 311.28125,358.5625 314.5706,359.54003 319,362.8125 C 323.4294,366.08497 328.97461,371.61334 333.3125,380.6875 C 341.98828,398.83583 345.91664,431.19511 326.65625,487.90625 L 329.14023,488.25 C 348.45128,431.3897 343.01172,398.74007 334.1875,380.28125 C 329.77539,371.05184 324.13756,365.38825 319.59375,362.03125 C 315.04994,358.67425 311.5625,357.59375 311.5625,357.59375 z"
+       id="path2425"
+       sodipodi:nodetypes="ccssccssc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 289.59375,362.0625 C 289.59375,362.0625 289.294,362.49571 288.90625,363.375 C 288.5185,364.25429 288.01204,365.60542 287.53125,367.5625 C 286.56968,371.47667 285.71753,377.78398 286.03125,387.375 C 286.6587,406.55704 292.02847,438.92264 310.96875,491.8125 L 313.92656,491.46875 C 295.00971,438.64433 287.6538,406.376 287.03125,387.34375 C 286.71998,377.82763 287.56425,371.62155 288.5,367.8125 C 288.96787,365.90798 289.4497,364.60397 289.8125,363.78125 C 290.1753,362.95853 290.40625,362.65625 290.40625,362.65625 L 289.59375,362.0625 z"
+       id="path2427"
+       sodipodi:nodetypes="csssccssscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 232.96875,370.4375 L 232.75,371.4375 C 232.75,371.4375 235.04233,371.86731 239.28125,374.40625 C 243.52017,376.94519 249.65415,381.57245 257.125,389.84375 C 272.0667,406.38635 291.13663,437.56438 312.54981,496.09375 L 314.75,495.75 C 293.30604,437.1365 272.9333,405.82794 257.875,389.15625 C 250.34585,380.8204 244.14501,376.15749 239.8125,373.5625 C 235.47999,370.96751 232.96875,370.4375 232.96875,370.4375 z"
+       id="path2429"
+       sodipodi:nodetypes="ccssccssc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 396.34375,364 C 396.34375,364 395.72903,364.12428 394.65625,364.53125 C 393.58347,364.93822 392.02079,365.6355 390.0625,366.875 C 386.14592,369.35399 380.61018,373.92609 374.0625,382.3125 C 360.96715,399.08532 341.79456,430.85278 325.35469,491.96621 L 328.34375,492.5 C 344.76102,431.47056 361.86768,399.55754 374.84375,382.9375 C 381.33179,374.62748 386.78712,370.12815 390.59375,367.71875 C 392.49707,366.51405 393.99131,365.8514 395,365.46875 C 396.00869,365.0861 396.5,365 396.5,365 L 396.34375,364 z"
+       id="path2431"
+       sodipodi:nodetypes="csssccssscc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 333.6875,358.3125 L 333.4375,359.28125 C 333.4375,359.28125 342.51666,361.68295 348.5,372.59375 C 354.48334,383.50455 357.3578,402.98337 344.53125,437.1875 L 345.46875,437.53125 C 358.35649,403.16394 355.53452,383.35706 349.375,372.125 C 343.21548,360.89294 333.6875,358.3125 333.6875,358.3125 z"
+       id="path2433" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 272.6875,361.90625 C 272.6875,361.90625 271.1708,362.45101 269.5625,364.1875 C 267.9542,365.92399 266.19968,368.84619 265.5625,373.625 C 264.28815,383.18262 267.3915,400.05847 284.5625,429.75 L 285.4375,429.25 C 268.32279,399.65581 265.33685,382.97363 266.5625,373.78125 C 267.17533,369.18506 268.84044,366.43315 270.3125,364.84375 C 271.78456,363.25435 273.03125,362.84375 273.03125,362.84375 L 272.6875,361.90625 z"
+       id="path2435" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 350.1875,435.90625 C 348.57716,436.11989 346.87516,437.11847 345.15625,439.03125 C 340.57248,444.13199 335.43166,455.76625 329.53125,477.9375 L 332.48906,478.21875 C 338.37436,456.10428 341.58377,444.52873 345.90625,439.71875 C 348.06749,437.31376 349.90537,436.61476 351.5625,436.9375 C 353.21963,437.26024 354.82288,438.66707 356.28125,440.84375 C 359.198,445.19711 361.46786,452.40752 362.96875,458.5 C 364.46964,464.59248 365.21875,469.59375 365.21875,469.59375 L 366.21875,469.4375 C 366.21875,469.4375 365.45001,464.42091 363.9375,458.28125 C 362.42499,452.14159 360.19039,444.88772 357.125,440.3125 C 355.5923,438.02489 353.81776,436.34021 351.75,435.9375 C 351.23306,435.83682 350.72428,435.83504 350.1875,435.90625 z"
+       id="path2437"
+       sodipodi:nodetypes="csccssssccsssc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 289.59375,450.6875 C 285.57245,450.23292 281.51922,451.88193 277.59375,454.84375 C 273.66828,457.80557 269.8528,462.08251 266.21875,467.0625 C 251.68257,486.98245 240.25,517.90625 240.25,517.90625 L 241.1875,518.25 C 241.1875,518.25 252.60761,487.37915 267,467.65625 C 270.5981,462.72552 274.38417,458.49466 278.1875,455.625 C 281.99083,452.75534 285.78916,451.27155 289.46875,451.6875 C 293.14834,452.10345 296.79033,454.41407 300.3125,459.4375 C 303.83467,464.46093 306.18209,475.71644 309.2086,486.75428 L 312.70273,486.2205 C 309.65781,475.11548 304.78252,464.04689 301.15625,458.875 C 297.52998,453.70311 293.61505,451.14208 289.59375,450.6875 z"
+       id="path2439"
+       sodipodi:nodetypes="cssccssssccsc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 369.4375,398.40625 C 367.61811,398.54072 365.29756,399.62847 362.5,402.5625 C 355.03984,410.38657 343.8162,431.49445 328.09375,485.09375 L 329.0625,485.375 C 344.7686,431.83144 356.03605,410.78307 363.21875,403.25 C 366.8101,399.48346 369.28564,399.11707 370.84375,399.53125 C 372.40186,399.94543 373.15625,401.1875 373.15625,401.1875 L 374,400.6875 C 374,400.6875 373.06243,399.08582 371.09375,398.5625 C 370.60158,398.43167 370.04396,398.36143 369.4375,398.40625 z"
+       id="path2441" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 267.5625,425.6875 C 255.52045,425.96327 247.4375,438.53125 247.4375,438.53125 L 248.28125,439.0625 C 248.28125,439.0625 256.24295,426.94744 267.59375,426.6875 C 273.26915,426.55753 279.86927,429.32732 286.9375,438.1875 C 294.00573,447.04768 301.50191,462.02227 308.8125,486.09375 L 312.02284,485.52871 C 304.69058,461.3859 294.91391,446.58179 287.71875,437.5625 C 280.52359,428.54321 273.58353,425.54962 267.5625,425.6875 z"
+       id="path2443"
+       sodipodi:nodetypes="cccssccsc" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 276.78125,455.59375 C 263.25939,470.53896 252.4369,475.82602 245.0625,477.40625 C 241.3753,478.19636 238.5619,478.07483 236.65625,477.75 C 234.7506,477.42517 233.8125,476.90625 233.8125,476.90625 L 233.34375,477.8125 C 233.34375,477.8125 234.44583,478.37393 236.46875,478.71875 C 238.49167,479.06357 241.46845,479.19203 245.28125,478.375 C 252.90685,476.74094 263.87901,471.33603 277.5,456.28125 L 276.78125,455.59375 z"
+       id="path2445" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 219.5,390.21875 C 219.5,390.21875 219.50581,391.2761 220,393 C 220.49419,394.7239 221.48629,397.15538 223.4375,399.96875 C 227.33992,405.59549 235.10717,412.79342 250.53125,419.25 L 250.90625,418.34375 C 235.61603,411.9432 228.02615,404.85093 224.25,399.40625 C 222.36192,396.68391 221.43439,394.37431 220.96875,392.75 C 220.50311,391.12569 220.5,390.21875 220.5,390.21875 L 219.5,390.21875 z"
+       id="path2447" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 348.38261,388.40117 C 348.10336,388.35958 347.71639,388.39944 347.28886,388.58867 C 346.4338,388.96714 345.4404,389.93494 344.47636,392.27617 C 342.54829,396.95862 340.61518,407.18697 340.25761,429.71367 L 341.25761,429.71367 C 341.61433,407.24036 343.59193,397.10711 345.41386,392.68242 C 346.32483,390.47008 347.18856,389.71913 347.69511,389.49492 C 347.94838,389.38282 348.1122,389.38417 348.22636,389.40117 C 348.34052,389.41817 348.35136,389.43242 348.35136,389.43242 L 348.88261,388.55742 C 348.88261,388.55742 348.66186,388.44276 348.38261,388.40117 z"
+       id="path2451" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 362.31504,359 C 362.31504,359 362.06685,359.04979 361.75254,359.1875 C 361.43823,359.32521 361.027,359.55373 360.53379,359.96875 C 359.54737,360.79879 358.31209,362.34586 357.12754,365.125 C 354.75843,370.68329 352.59931,381.25805 353.31504,401.65625 L 354.31504,401.625 C 353.60219,381.30893 355.76004,370.83457 358.03379,365.5 C 359.17066,362.83272 360.3461,361.46014 361.19004,360.75 C 361.61201,360.39493 361.93181,360.1932 362.15879,360.09375 C 362.38577,359.9943 362.47129,360 362.47129,360 L 362.31504,359 z"
+       id="path2453" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 388.24667,347.03966 L 387.30917,347.44591 C 387.30917,347.44591 387.685,348.24628 387.93417,349.91466 C 388.18334,351.58304 388.31757,354.07119 387.74667,357.32091 C 386.60488,363.82034 382.70648,373.38817 371.68417,385.47716 L 372.43417,386.13341 C 383.55472,373.93668 387.53578,364.22326 388.71542,357.50841 C 389.30524,354.15098 389.19839,351.52753 388.93417,349.75841 C 388.66995,347.98929 388.24667,347.03966 388.24667,347.03966 z"
+       id="path2455" />
+    <path
+       style="fill:#2b0000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 358.73985,442.62246 L 357.8336,443.02871 C 362.5029,453.08565 367.87887,459.75786 372.11485,463.90371 C 376.35083,468.04956 379.4586,469.68496 379.4586,469.68496 L 379.92735,468.80996 C 379.92735,468.80996 376.99048,467.2534 372.8336,463.18496 C 368.67672,459.11652 363.35627,452.56551 358.73985,442.62246 z"
+       id="path2457" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 315.71429,531.64789 C 165.71429,555.93361 165.71429,555.93361 165.71429,555.93361"
+       id="path2459" />
+    <path
+       style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 325,531.64789 C 469.28572,554.50504 469.28572,554.50504 469.28572,554.50504"
+       id="path2461" />
+  </g>
+</svg>
diff --git a/Libs/libroxml-2.3.0/docs/doxy.cfg b/Libs/libroxml-2.3.0/docs/doxy.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..c9b2c1c1be245c870424f03d60adc8eea2453a83
--- /dev/null
+++ b/Libs/libroxml-2.3.0/docs/doxy.cfg
@@ -0,0 +1,1799 @@
+# Doxyfile 1.8.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a hash (#) is considered a comment and will be ignored.
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME           = "libroxml"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 2.3.0
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO           = data/icons/roxml.png
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = docs/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful if your file system
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+SYMBOL_CACHE_SIZE      = 0
+
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or macro consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and macros in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml.c \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml.h \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml-internal.h \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml-internal.c \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml-defines.h \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml-types.h \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml-tune.h \
+                         /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml-doxy.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
+
+HTML_HEADER            = /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/data/html/libroxml-header.html
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/data/html/libroxml-footer.html
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# style sheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/data/html/doxygen.css
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the style sheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you may also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
+
+MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = YES
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load style sheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will generate a graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
+
+MSCFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Libs/libroxml-2.3.0/docs/doxy.cfg.in b/Libs/libroxml-2.3.0/docs/doxy.cfg.in
new file mode 100644
index 0000000000000000000000000000000000000000..bb7f88b4ee1452111a34855172ac4ae5526cdeec
--- /dev/null
+++ b/Libs/libroxml-2.3.0/docs/doxy.cfg.in
@@ -0,0 +1,1799 @@
+# Doxyfile 1.8.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a hash (#) is considered a comment and will be ignored.
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME           = "libroxml"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = @PACKAGE_VERSION@
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO           = data/icons/roxml.png
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = docs/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful if your file system
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+SYMBOL_CACHE_SIZE      = 0
+
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or macro consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and macros in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = @abs_top_srcdir@/src/roxml.c \
+                         @abs_top_srcdir@/src/roxml.h \
+                         @abs_top_srcdir@/src/roxml-internal.h \
+                         @abs_top_srcdir@/src/roxml-internal.c \
+                         @abs_top_srcdir@/src/roxml-defines.h \
+                         @abs_top_srcdir@/src/roxml-types.h \
+                         @abs_top_srcdir@/src/roxml-tune.h \
+                         @abs_top_srcdir@/src/roxml-doxy.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
+
+HTML_HEADER            = @abs_top_srcdir@/data/html/libroxml-header.html
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = @abs_top_srcdir@/data/html/libroxml-footer.html
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# style sheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = @abs_top_srcdir@/data/html/doxygen.css
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the style sheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you may also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
+
+MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = YES
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load style sheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will generate a graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
+
+MSCFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Libs/libroxml-2.3.0/docs/man.cfg b/Libs/libroxml-2.3.0/docs/man.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..d7b54b4b39c7aab05268102fb23303f340c2d07c
--- /dev/null
+++ b/Libs/libroxml-2.3.0/docs/man.cfg
@@ -0,0 +1,1792 @@
+# Doxyfile 1.8.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a hash (#) is considered a comment and will be ignored.
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME           = "libroxml"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 2.3.0
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO           = /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/data/icons/roxml.png
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = docs/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful if your file system
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+SYMBOL_CACHE_SIZE      = 0
+
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or macro consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and macros in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = /tmp/build-libroxml-140130131151/libroxml-git-2.3.0/src/roxml.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = NO
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# style sheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the style sheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you may also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
+
+MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load style sheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will generate a graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
+
+MSCFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Libs/libroxml-2.3.0/docs/man.cfg.in b/Libs/libroxml-2.3.0/docs/man.cfg.in
new file mode 100644
index 0000000000000000000000000000000000000000..b76d047e2f771fa9b200b72e328c52848d2627dc
--- /dev/null
+++ b/Libs/libroxml-2.3.0/docs/man.cfg.in
@@ -0,0 +1,1792 @@
+# Doxyfile 1.8.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a hash (#) is considered a comment and will be ignored.
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME           = "libroxml"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = @PACKAGE_VERSION@
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO           = @abs_top_srcdir@/data/icons/roxml.png
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = docs/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful if your file system
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+SYMBOL_CACHE_SIZE      = 0
+
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or macro consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and macros in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = @abs_top_srcdir@/src/roxml.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = NO
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# style sheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the style sheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you may also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
+
+MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load style sheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will generate a graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
+
+MSCFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Libs/libroxml-2.3.0/docs/roxml.1 b/Libs/libroxml-2.3.0/docs/roxml.1
new file mode 100644
index 0000000000000000000000000000000000000000..294eb2e3cce7d1ab93faa2e1451be5ea39013a29
--- /dev/null
+++ b/Libs/libroxml-2.3.0/docs/roxml.1
@@ -0,0 +1,42 @@
+.TH ROXML 1 "February 28, 2010"
+.SH NAME
+roxml \- xml parsing in command line
+.SH SYNOPSIS
+.B roxml
+.RI [ options ] " file" 
+.I " xpath"
+.br
+.SH DESCRIPTION
+This manual page documents briefly the
+.B roxml
+commands.
+.PP
+\fBroxml\fP is a program that can be used for applying xpath on XML files from shell programs.
+.br
+It will search for nodes matching
+.I xpath
+inside
+.I file
+and will display all the results as text on separates lines.
+.br
+It will also prepend the keyword 
+.B ans[X]
+where X is the result index.
+
+.SH OPTIONS
+This program follow the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+A summary of options is included below.
+For a complete description, see the Info files.
+.TP
+.B \-h, \-\-help
+Show summary of options.
+.TP
+.B \-q, \-\-quiet
+Only shows the results: no index
+.br
+.SH AUTHOR
+roxml was written by Tristan Lelong.
+.PP
+This manual page was written by Tristan Lelong <blunderer@blunderer.org>,
+for the Debian project (but may be used by others).
diff --git a/Libs/libroxml-2.3.0/fuse.xml/README b/Libs/libroxml-2.3.0/fuse.xml/README
new file mode 100644
index 0000000000000000000000000000000000000000..d9fe1d335e3a891ba978908184f1a87af3a40b21
--- /dev/null
+++ b/Libs/libroxml-2.3.0/fuse.xml/README
@@ -0,0 +1,39 @@
+
+-------------------------
+How to use mount.fuse.xml
+-------------------------
+
+# 1st step: build and install libroxml
+- make
+- sudo make install
+
+# 2nd step: build and install mount.fuse.xml
+- make
+- sudo make install
+
+# 3rd step: find an XML file
+- try your favorite RSS feed or find any other valid xml document.
+
+# 4th step: mount it
+- sudo mount -t fuse.xml <xml file> <mount point>
+- if you want debug info you can add --debug option to mount. logs will be written to /var/log/xmlfs.log
+	user@station:~/mnt/$ sudo mount -o --debug -t fuse.xml <xml file> <mount point>
+
+# 5th step: navigate
+- you can now navigate into <mount point> as if you were in a ext3 fs
+- you can also use XPath as unix path to navigate for ex:
+
+	user@station:~/mnt/xml$ cd rss/channel/
+
+	user@station:~/mnt/xml/rss/channel$ ls
+	atom:link     copyright    generator  item[1]   item[11]  item[13]  item[15]  item[17]  item[19]  item[20]  item[4]  item[6]  item[8]  language       link            title
+	content.data  description  item[0]    item[10]  item[12]  item[14]  item[16]  item[18]  item[2]   item[3]   item[5]  item[7]  item[9]  lastBuildDate  managingEditor  webMaster
+
+	user@station:~/mnt/xml/rss/channel$ cd item\["last()"]
+
+	user@station:~/mnt/xml/rss/channel/item[last()]$ ls
+	content.data  description  guid  link  pubDate  title
+
+# 6th step: unmount your file
+- sudo umount <mount point>
+
diff --git a/Libs/libroxml-2.3.0/fuse.xml/xmlfs.c b/Libs/libroxml-2.3.0/fuse.xml/xmlfs.c
new file mode 100644
index 0000000000000000000000000000000000000000..13e4b9249fc3d8af32d3dffdd5d3e1951cebb1fd
--- /dev/null
+++ b/Libs/libroxml-2.3.0/fuse.xml/xmlfs.c
@@ -0,0 +1,446 @@
+/** \file xmlfs.c
+ *  \brief source for mount.fuse.xml
+ *         
+ * This is the source file for fuse xml file system
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 15 Apr 2009
+ *
+ * Copyright (C) 2009 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef XMLFS_C
+#define XMLFS_C
+
+#define FUSE_USE_VERSION 26
+ 
+#include <fuse.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <errno.h>
+ 
+#include <roxml.h>
+ 
+
+#define MAX_ENTRIES	512
+#define LOG_FILE	"/var/log/xmlfs.log"
+#define NODE_CONTENT	"content.data"
+
+node_t ** opened_files = NULL;
+FILE *debug_f = NULL;
+
+#define DEBUG(...) { if(debug_f) { fprintf(debug_f,"%s::%s:%d ",__FILE__,__func__,__LINE__);fprintf(debug_f,__VA_ARGS__); fprintf(debug_f,"\n"); fflush(debug_f); } }
+ 
+static int xmlfs_getattr(const char *path, struct stat *stbuf)
+{
+	DEBUG("here")
+	int nb;
+	int fsize = 1;
+	int content = 0;
+	node_t *n = NULL;
+	node_t *root = fuse_get_context()->private_data;
+	char newpath[512];
+	char *ptr;
+
+	strcpy(newpath, path);
+	if(ptr = strstr(newpath, NODE_CONTENT))	{
+		*(ptr-1) = 0;
+		content = 1;
+	}
+
+	DEBUG("trying '%s'",newpath);
+	node_t **ans = roxml_xpath(root, newpath, &nb);
+
+	if(ans) {
+		DEBUG("got ans")
+		n = ans[0];
+		if((roxml_get_type(n)==ROXML_ATTR_NODE)||(content))	{
+			char * txt = roxml_get_content(n, NULL, 0, NULL);
+			fsize = strlen(txt);
+			roxml_release(txt);
+			stbuf->st_mode = S_IFREG;
+			DEBUG("file stat : %d",fsize)
+		} else {
+			fsize = 1;
+			stbuf->st_mode = S_IFDIR | S_IXUSR | S_IXGRP | S_IXOTH;
+		}
+		
+		stbuf->st_ino = 0;
+		stbuf->st_mode |= S_IRUSR | S_IRGRP | S_IROTH /*| S_IWUSR | S_IWGRP | S_IWOTH*/;
+		stbuf->st_nlink = 0;
+		stbuf->st_uid = 0;
+		stbuf->st_gid = 0;
+		stbuf->st_rdev = 0;
+		stbuf->st_size = fsize;
+		stbuf->st_blksize = 1;
+		stbuf->st_blocks = fsize;
+		stbuf->st_atime = 0;
+		stbuf->st_mtime = 0;
+		stbuf->st_ctime = 0;
+
+		DEBUG("will release")
+		roxml_release(ans);
+		DEBUG("released")
+		return 0;
+	}
+	return -ENOENT;
+}
+ 
+static int xmlfs_readdir(const char *path, void *buf, fuse_fill_dir_t filler, off_t offset, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	DEBUG("trying '%s'",path);
+	int i;
+	int nb;
+	node_t *n = NULL;
+	node_t *root = fuse_get_context()->private_data;
+	node_t **ans = roxml_xpath(root, (char*)path, &nb);
+
+	if(ans)	{
+		n = ans[0];
+		roxml_release(ans);
+
+		nb = roxml_get_chld_nb(n);
+		DEBUG("%d dirs", nb)
+		for(i = 0; i < nb; i++)	{
+			int idx;
+			char fname[512] = "";
+			char rname[512] = "";
+			node_t *tmp = roxml_get_chld(n, NULL, i);
+			char *name = roxml_get_name(tmp, NULL, 0);
+			DEBUG("get position of %s", name)
+			idx = roxml_get_node_position(tmp);
+			if(name == NULL) {
+				switch(roxml_get_type(tmp)) {
+					case ROXML_PI_NODE:
+						strcpy(rname,"processing-instruction()");
+					break;
+					case ROXML_CMT_NODE:
+						strcpy(rname,"comment()");
+					break;
+				}
+				name = rname;
+			}
+			if(idx > 1)	{
+				DEBUG("here")
+				sprintf(fname,"%s[%d]",name,idx);
+				filler(buf, fname, NULL, 0);
+			} else	{
+				DEBUG("here")
+				filler(buf, name, NULL, 0);
+			}
+			roxml_release(name);
+			DEBUG("here")
+		}
+		nb = roxml_get_attr_nb(n);
+		DEBUG("%d files", nb)
+		for(i = 0; i < nb; i++)	{
+			char fname[512] = "@";
+			char *name = roxml_get_name(roxml_get_attr(n, NULL, i), NULL, 0);
+			strcat(fname, name);
+			filler(buf, fname, NULL, 0);
+			roxml_release(name);
+		}
+		nb = roxml_get_txt_nb(n);
+		if(nb > 0)	{
+			DEBUG("content file")
+			char fname[512];
+			sprintf(fname, "%s", NODE_CONTENT, i);
+			filler(buf, fname, NULL, 0);
+		}
+		if((roxml_get_type(n) == ROXML_PI_NODE)||(roxml_get_type(n) == ROXML_CMT_NODE)) {
+			DEBUG("specnode file")
+			char fname[512];
+			sprintf(fname, "%s", NODE_CONTENT, i);
+			filler(buf, fname, NULL, 0);
+		}
+
+		return 0;
+	}
+	return -ENOENT;
+}
+ 
+static int xmlfs_create(const char *path, mode_t mode, struct fuse_file_info *fi)
+{
+	DEBUG("here %s", path)
+
+	int nb = 0;
+	char *dirname = strdup(path);
+	char *filename = dirname;
+	char *ptr = dirname;
+	node_t *root = fuse_get_context()->private_data;
+
+	while(ptr = strstr("/", dirname)) {
+		filename = ptr;
+	}
+	filename[0] = '\0';
+	filename++;
+
+	DEBUG("file '%s' in '%s'", filename, dirname);
+	node_t **parent = roxml_xpath(root, strlen(dirname)?dirname:"/", &nb);
+
+	DEBUG("%d results", nb);
+	if(nb > 0) {
+		DEBUG("parent is : '%s'\n",roxml_get_name(parent[0], NULL, 0));
+		roxml_add_node(parent[0], 0, ROXML_ELM_NODE, filename, NULL);
+		roxml_release(RELEASE_LAST);
+	} else {
+		DEBUG("zero results for %s", dirname)
+		return -ENOENT;
+	}
+
+	free(dirname);
+	return 0;
+}
+ 
+static int xmlfs_open(const char *path, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	int i = 0;
+	int nb;
+	node_t *root = fuse_get_context()->private_data;
+	char newpath[512];
+	char *ptr;
+
+	strcpy(newpath, path);
+	if(ptr = strstr(newpath, NODE_CONTENT))	{
+		*(ptr-1) = 0;
+	}
+	node_t **ans = roxml_xpath(root, (char*)newpath, &nb);
+
+	if(ans)	{
+		node_t *n = ans[0];
+		roxml_release(ans);
+		while((i < MAX_ENTRIES)&&(opened_files[i]))	{ i++; } 
+		if(i < MAX_ENTRIES)	{
+			fi->fh = i;
+			opened_files[i] = n;
+
+			return 0;
+		}
+		return -ENOENT;
+	}
+	return -ENOENT;
+}
+
+static int xmlfs_read(const char *path, char *buf, size_t size, off_t offset, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	int bsize;
+	int bytes;
+	node_t *n;
+	char *content;
+	if(size == 0) { return 0; }
+
+	n = opened_files[fi->fh];
+
+	if (!n) { return -ENOENT; }
+
+	content = roxml_get_content(n, NULL, 0, NULL);
+	bsize = strlen(content);
+
+	if((size + offset) >= bsize)	{
+		bytes = bsize - offset;
+	} else {
+		bytes = size;
+	}
+	memcpy(buf, content+offset, bytes); 
+
+	roxml_release(content);
+
+	return bytes;
+}
+
+static int xmlfs_write(const char *path, const char *buf, size_t size, off_t offset, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+static int xmlfs_fsync(const char *path, int datasync, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+static int xmlfs_release(const char *path, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	if(fi->fh < 0) { return -ENOENT; }
+	if(fi->fh > MAX_ENTRIES) { return -ENOENT; }
+
+	DEBUG("closing file %d",fi->fh)
+	opened_files[fi->fh] = NULL;
+	return 0;
+}
+
+void xmlfs_cleanup(void *data)
+{
+	DEBUG("here")
+	DEBUG("freeing file table")
+	free(opened_files);
+}
+
+int xmlfs_flush(const char *path, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+int xmlfs_statfs(const char *path, struct statvfs *stats)
+{
+	DEBUG("here")
+	stats->f_bsize = 0;
+	stats->f_frsize = 0;
+	stats->f_blocks = 0;
+	stats->f_bfree = 0;
+	stats->f_bavail = 0;
+	stats->f_namemax = 512;
+	stats->f_files = 1000000000;
+	stats->f_ffree = 1000000000;
+	return 0;
+}
+
+int xmlfs_truncate(const char *path, off_t size)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+int xmlfs_ftruncate(const char *path, off_t size, struct fuse_file_info *fi)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+int xmlfs_unlink(const char *path)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+int xmlfs_rename(const char *from, const char *to)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+int xmlfs_mkdir(const char *dir, mode_t ignored)
+{
+	DEBUG("here")
+	return -ENOENT;
+}
+
+void *xmlfs_init(struct fuse_conn_info *conn)
+{
+	DEBUG("here")
+	node_t *n = NULL;
+	char *src = NULL;
+	struct fuse_context *ctx = fuse_get_context();
+
+	opened_files = (node_t**)malloc(sizeof(node_t*)*MAX_ENTRIES);
+
+	src = (char*)ctx->private_data;
+	DEBUG("mounting %s",src)
+
+	n = roxml_load_doc(src);
+	DEBUG("loaded doc to %p mount init ok", n);
+
+	return n;
+}
+
+static struct fuse_operations xmlfs_oper = {
+	.getattr = xmlfs_getattr,
+	.statfs = xmlfs_statfs,
+	.readdir = xmlfs_readdir,
+	.mkdir = xmlfs_mkdir,
+	.rmdir = xmlfs_unlink,
+	.create = xmlfs_create,
+	.open = xmlfs_open,
+	.read = xmlfs_read,
+	.write = xmlfs_write,
+	.truncate = xmlfs_truncate,
+	.ftruncate = xmlfs_ftruncate,
+	.unlink = xmlfs_unlink,
+	.rename = xmlfs_rename,
+	.fsync = xmlfs_fsync,
+	.release = xmlfs_release,
+	.init = xmlfs_init,
+	.destroy = xmlfs_cleanup
+};
+
+static int xmlfs_opt_proc(void *data, const char *arg, int key, struct fuse_args *outargs)
+{
+	DEBUG("here")
+	char *data_arg = (char*)data;
+	static int num = 0;
+
+	switch(key) {
+		case FUSE_OPT_KEY_OPT:
+			if(strcmp(arg, "--debug") == 0) {
+				debug_f = fopen(LOG_FILE,"w");
+				fprintf(stderr,"debug mode started\n");
+				return 0;
+			} else if(strcmp(arg, "-oallow-other") == 0) {
+				return 0;
+			}
+			break;
+		case FUSE_OPT_KEY_NONOPT:
+			num++;
+			if(num == 1)	{
+				strcpy(data_arg, arg);
+				return 0;
+			}	
+			break;
+	}
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	DEBUG("here")
+	int i, j;
+	char mount_src[512] = "";
+	struct fuse_args args = FUSE_ARGS_INIT(argc, argv);
+
+	if (argc < 2) {
+		return -1;
+	}
+
+	if(fuse_opt_parse(&args, mount_src, NULL, xmlfs_opt_proc) == -1) {
+		return -1;
+	}
+	fuse_opt_add_arg(&args, "-oallow_other");
+
+	if(strlen(mount_src) == 0)	{
+		return -1;
+	} else if(mount_src[0] != '/')	{
+		char tmp[512];
+		strcpy(tmp, mount_src);
+		getcwd(mount_src, 512);
+		strcat(mount_src, "/");
+		strcat(mount_src, tmp);
+	}
+
+	return fuse_main(args.argc, args.argv, &xmlfs_oper, mount_src);
+}
+
+#endif /* XMLFS_C */
+
diff --git a/Libs/libroxml-2.3.0/libroxml.pc.in b/Libs/libroxml-2.3.0/libroxml.pc.in
new file mode 100644
index 0000000000000000000000000000000000000000..598f4a59d8b0ce79eeafa324e3b6a2fdc80e8ba4
--- /dev/null
+++ b/Libs/libroxml-2.3.0/libroxml.pc.in
@@ -0,0 +1,11 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: libroxml
+Version: @PACKAGE_VERSION@
+Description: light and powerful XML parser
+URL: http://www.libroxml.net
+Libs: -L${libdir} -lroxml
+Cflags: -I${includedir}
diff --git a/Libs/libroxml-2.3.0/m4/libtool.m4 b/Libs/libroxml-2.3.0/m4/libtool.m4
new file mode 100644
index 0000000000000000000000000000000000000000..02b4bbec520c94a9535cdb7701d4f9201a0709a9
--- /dev/null
+++ b/Libs/libroxml-2.3.0/m4/libtool.m4
@@ -0,0 +1,7991 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_REPLACE_SHELLFNS
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+    ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*" 
+}
+
+case "$ECHO" in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[  --with-sysroot[=DIR] Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+	test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[23]].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
+
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT@&t@_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
+  esac
+
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+	_LT_TAGVAR(link_all_deplibs, $1)=no
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX([$1])
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
+
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS="$save_LDFLAGS"])
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX([$1])
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+	      '"$_LT_TAGVAR(reload_cmds, $1)"
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC* | sunCC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary parameter first.
+    func_stripname_result=${3}
+    func_stripname_result=${func_stripname_result#"${1}"}
+    func_stripname_result=${func_stripname_result%"${2}"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+    func_split_long_opt_name=${1%%=*}
+    func_split_long_opt_arg=${1#*=}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+    func_split_short_opt_arg=${1#??}
+    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+    case ${1} in
+      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+      *)    func_lo2o_result=${1} ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+
+  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+
+  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+    func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/Libs/libroxml-2.3.0/m4/ltoptions.m4 b/Libs/libroxml-2.3.0/m4/ltoptions.m4
new file mode 100644
index 0000000000000000000000000000000000000000..5d9acd8e23bcfd20d353804aff13666ecbed54f4
--- /dev/null
+++ b/Libs/libroxml-2.3.0/m4/ltoptions.m4
@@ -0,0 +1,384 @@
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+#   Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/Libs/libroxml-2.3.0/m4/ltsugar.m4 b/Libs/libroxml-2.3.0/m4/ltsugar.m4
new file mode 100644
index 0000000000000000000000000000000000000000..9000a057d31ddf75cb85ccda8757de4493bcdbe7
--- /dev/null
+++ b/Libs/libroxml-2.3.0/m4/ltsugar.m4
@@ -0,0 +1,123 @@
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/Libs/libroxml-2.3.0/m4/ltversion.m4 b/Libs/libroxml-2.3.0/m4/ltversion.m4
new file mode 100644
index 0000000000000000000000000000000000000000..07a8602d48d615a65800b14446d8c8c8694f2818
--- /dev/null
+++ b/Libs/libroxml-2.3.0/m4/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/Libs/libroxml-2.3.0/m4/lt~obsolete.m4 b/Libs/libroxml-2.3.0/m4/lt~obsolete.m4
new file mode 100644
index 0000000000000000000000000000000000000000..c573da90c5ccebffba4dce9a6462036bfa986d5f
--- /dev/null
+++ b/Libs/libroxml-2.3.0/m4/lt~obsolete.m4
@@ -0,0 +1,98 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/Libs/libroxml-2.3.0/src/config.h.in b/Libs/libroxml-2.3.0/src/config.h.in
new file mode 100644
index 0000000000000000000000000000000000000000..e42165d920a36322a236f10035a8a1b0ddd2c13d
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/config.h.in
@@ -0,0 +1,102 @@
+/* src/config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Can the target library commit a tree. When set to 0, this result in smaller
+   binary (this saves about 5kb). [default=yes] */
+#undef CONFIG_XML_COMMIT_XML_TREE
+
+/* Is the target library uses stack for internal buffers or heap. This is not
+   compatible with thread safety. [default=no] */
+#undef CONFIG_XML_HEAP_BUFFERS
+
+/* Can the target library modify XML tree. When set to 0, this result in
+   smaller binary (this saves about 3kb). [default=yes] */
+#undef CONFIG_XML_READ_WRITE
+
+/* Define the size of internal buffer. For very small systems, large internal
+   buffers can cause the systeml the behave strangely. [default=no] */
+#undef CONFIG_XML_SMALL_BUFFER
+
+/* Limit the size of input XML libroxml can handle to 64kb instead of 4Gb.
+   Setting this option will reduce the size of RAM loaded tree. [default=no]
+   */
+#undef CONFIG_XML_SMALL_INPUT_FILE
+
+/* Is the target library thread safe or not. [default=yes] */
+#undef CONFIG_XML_THREAD_SAFE
+
+/* Can the target library perform xpath queries. When set to 0, this result in
+   smaller binary (this saves about 20kb). [default=yes] */
+#undef CONFIG_XML_XPATH_ENGINE
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <fuse.h> header file. */
+#undef HAVE_FUSE_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* The size of `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of `long', as computed by sizeof. */
+#undef SIZEOF_LONG
+
+/* The size of `size_t', as computed by sizeof. */
+#undef SIZEOF_SIZE_T
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
diff --git a/Libs/libroxml-2.3.0/src/roxml-defines.h b/Libs/libroxml-2.3.0/src/roxml-defines.h
new file mode 100644
index 0000000000000000000000000000000000000000..c2af432ace97d567872c6a3354b2c1f9e9a686f3
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-defines.h
@@ -0,0 +1,426 @@
+/** \file roxml-defines.h
+ *  \brief internal header for libroxml.so
+ *
+ * This is the internal header file used by roxml.c
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 23 Dec 2008
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef ROXML_DEF_H
+#define ROXML_DEF_H
+
+#ifndef ROXML_TUNE_H
+#error "roxml-tune.h must be included before roxml-def.h to tune it."
+#endif
+
+#define ROXML_PATH_OR	"|"
+#define ROXML_PATH_AND	"&"
+#define ROXML_COND_OR	"or"
+#define ROXML_COND_AND	"and"
+
+#define ROXML_OPERATOR_OR	1
+#define ROXML_OPERATOR_AND	2
+#define ROXML_OPERATOR_INF	3
+#define ROXML_OPERATOR_SUP	4
+#define ROXML_OPERATOR_EINF	5
+#define ROXML_OPERATOR_ESUP	6
+#define ROXML_OPERATOR_DIFF	7
+#define ROXML_OPERATOR_EQU	8
+#define ROXML_OPERATOR_ADD	9
+#define ROXML_OPERATOR_SUB	10
+#define ROXML_OPERATOR_MUL	11
+#define ROXML_OPERATOR_DIV	12
+
+#define ROXML_FUNC_INTCOMP	1
+#define ROXML_FUNC_STRCOMP	2
+#define ROXML_FUNC_POS		3
+#define ROXML_FUNC_FIRST	4
+#define ROXML_FUNC_LAST		5
+#define ROXML_FUNC_TEXT		6
+#define ROXML_FUNC_NODE		7
+#define ROXML_FUNC_COMMENT	8
+#define ROXML_FUNC_PI		9
+#define ROXML_FUNC_XPATH	10
+#define ROXML_FUNC_NSURI	11
+
+#define ROXML_FUNC_POS_STR	"position()"
+#define ROXML_FUNC_FIRST_STR	"first()"
+#define ROXML_FUNC_LAST_STR	"last()"
+#define ROXML_FUNC_NSURI_STR	"namespace-uri()"
+
+#define ROXML_FUNC_TEXT_STR	"text()"
+#define ROXML_FUNC_NODE_STR	"node()"
+#define ROXML_FUNC_COMMENT_STR	"comment()"
+#define ROXML_FUNC_PI_STR	"processing-instruction()"
+
+/**
+ * \def MAX_NS_LEN
+ * 
+ * constant for namespace lenght
+ */
+#define MAX_NS_LEN		128
+
+/**
+ * \def ROXML_BULK_READ
+ * 
+ * This is the internal buffer size for chunk of xml files
+ */
+#if(CONFIG_XML_SMALL_BUFFER==1)
+#define ROXML_BULK_READ		256
+#else /* CONFIG_XML_SMALL_BUFFER==0 */
+#define ROXML_BULK_READ		4096
+#endif /* CONFIG_XML_SMALL_BUFFER */
+
+/**
+ * \def ROXML_BASE_LEN
+ * 
+ * This is the max size for XML objects (node name, attribute name and values...)
+ * It is caused by the split of the XML file for parsing:
+ * 512 bytes are reserved as security to handle splitting inside an XML object.
+ * This is also the len of internal buffers. If a requested buffer is bigger,
+ * then a malloc/free will occur and may slow down libroxml.
+ */
+#if(CONFIG_XML_SMALL_BUFFER==1)
+#define ROXML_BASE_LEN		64
+#else /* CONFIG_XML_SMALL_BUFFER==0 */
+#define ROXML_BASE_LEN		512
+#endif /* CONFIG_XML_SMALL_BUFFER */
+
+#define ROXML_ID_CHILD		0
+#define ROXML_ID_DESC_O_SELF	1
+#define ROXML_ID_SELF		2
+#define ROXML_ID_PARENT		3
+#define ROXML_ID_ATTR		4
+#define ROXML_ID_DESC		5
+#define ROXML_ID_ANC		6
+#define ROXML_ID_NEXT_SIBL	7
+#define ROXML_ID_PREV_SIBL	8
+#define ROXML_ID_NEXT		9
+#define ROXML_ID_PREV		10
+#define ROXML_ID_NS		11
+#define ROXML_ID_ANC_O_SELF	12
+
+#define ROXML_L_CHILD		"child::"
+#define ROXML_L_DESC_O_SELF	"descendant-or-self::"
+#define ROXML_L_SELF		"self::"
+#define ROXML_L_PARENT		"parent::"
+#define ROXML_L_ATTR		"attribute::"
+#define ROXML_L_DESC		"descendant::"
+#define ROXML_L_ANC		"ancestor::"
+#define ROXML_L_NEXT_SIBL	"following-sibling::"
+#define ROXML_L_PREV_SIBL	"preceding-sibling::"
+#define ROXML_L_NEXT		"following::"
+#define ROXML_L_PREV		"preceding::"
+#define ROXML_L_NS		"namespace::"
+#define ROXML_L_ANC_O_SELF	"ancestor-or-self::"
+
+#define ROXML_S_CHILD
+#define ROXML_S_DESC_O_SELF	""
+#define ROXML_S_SELF		"."
+#define ROXML_S_PARENT		".."
+#define ROXML_S_ATTR		"@"
+
+#define ROXML_DIRECT		0
+#define ROXML_DESC_ONLY		1
+#define ROXML_DESC_O_SELF	2
+
+#define ROXML_REQTABLE_ID	0
+#define ROXML_NS_ID		1
+#define ROXML_XPATH_FIRST_ID	16
+
+/**
+ * \def PTR_NONE
+ *
+ * constant for void pointers
+ */
+#define PTR_NONE	-1
+
+/**
+ * \def PTR_VOID
+ *
+ * constant for void pointers
+ */
+#define PTR_VOID	0
+
+/**
+ * \def PTR_CHAR
+ *
+ * constant for char pointers
+ */
+#define PTR_CHAR	2
+
+/**
+ * \def PTR_CHAR_STAR
+ *
+ * constant for char table pointers
+ */
+#define PTR_CHAR_STAR	3
+
+/**
+ * \def PTR_NODE
+ *
+ * constant for node pointers
+ */
+#define PTR_NODE	4
+
+/**
+ * \def PTR_NODE_STAR
+ *
+ * constant for node table pointers
+ */
+#define PTR_NODE_STAR	5
+
+/**
+ * \def PTR_INT
+ *
+ * constant for int pointer
+ */
+#define PTR_INT	6
+
+/**
+ * \def PTR_INT_STAR
+ *
+ * constant for int table pointers
+ */
+#define PTR_INT_STAR	7
+
+/**
+ * \def PTR_NODE_RESULT
+ *
+ * constant for node table pointers where node are not to delete
+ */
+#define PTR_NODE_RESULT	8
+
+/**
+ * \def PTR_IS_STAR(a)
+ *
+ * macro returning if a memory_cell is a star cell
+ */
+#define PTR_IS_STAR(a)	((a)->type % 2)
+
+/**
+ * \def ROXML_FILE
+ *
+ * constant for argument node
+ */
+#define ROXML_FILE	0x01
+
+/**
+ * \def ROXML_BUFF
+ *
+ * constant for buffer document
+ */
+#define ROXML_BUFF	0x02
+
+/**
+ * \def ROXML_PENDING
+ *
+ * constant for pending node
+ */
+#define ROXML_PENDING	0x04
+
+/**
+ * \def ROXML_INVALID
+ *
+ * constant for invalid node
+ */
+#define ROXML_INVALID	0x03
+
+/**
+ * \def STATE_NODE_NONE
+ *
+ * state for the state machine for init
+ */
+#define STATE_NODE_NONE		0
+
+/**
+ * \def STATE_NODE_BEG
+ *
+ * state for the state machine for begining of a node
+ */
+#define STATE_NODE_BEG		1
+
+/**
+ * \def STATE_NODE_NAME
+ *
+ * state for the state machine for name read
+ */
+#define STATE_NODE_NAME		2
+
+/**
+ * \def STATE_NODE_END
+ *
+ * state for the state machine for end of node
+ */
+#define STATE_NODE_END		3
+
+/**
+ * \def STATE_NODE_STRING
+ *
+ * state for the state machine for string reading
+ */
+#define STATE_NODE_STRING	4
+
+/**
+ * \def STATE_NODE_ARG
+ *
+ * state for the state machine for attribute name reading
+ */
+#define STATE_NODE_ARG		5
+
+/**
+ * \def STATE_NODE_ARGVAL
+ *
+ * state for the state machine for attribute value reading
+ */
+#define STATE_NODE_ARGVAL	6
+
+/**
+ * \def STATE_NODE_SEP	
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_SEP		7
+
+/**
+ * \def STATE_NODE_PI
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_PI		8
+
+/**
+ * \def STATE_NODE_SINGLE
+ *
+ * state for the state machine for single nodes
+ */
+#define STATE_NODE_SINGLE	9
+
+/**
+ * \def STATE_NODE_ATTR
+ *
+ * state for the state machine for attribut reading
+ */
+#define STATE_NODE_ATTR		10
+
+/**
+ * \def STATE_NODE_CONTENT
+ *
+ * state for the state machine for content read
+ */
+#define STATE_NODE_CONTENT	11
+
+/**
+ * \def STATE_NODE_COMMENT_BEG
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_COMMENT_BEG		12
+
+/**
+ * \def STATE_NODE_COMMENT	
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_COMMENT		14
+
+/**
+ * \def STATE_NODE_COMMENT_END	
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_COMMENT_END		15
+
+/**
+ * \def STATE_NODE_CDATA_BEG
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_CDATA_BEG		16
+
+/**
+ * \def STATE_NODE_CDATA
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_CDATA		22
+
+/**
+ * \def STATE_NODE_CDATA_END
+ *
+ * state for the state machine for separator reading
+ */
+#define STATE_NODE_CDATA_END		23
+
+/**
+ * \def MODE_COMMENT_NONE
+ *
+ * mode init in state machine
+ */
+#define MODE_COMMENT_NONE	0
+
+/**
+ * \def MODE_COMMENT_QUOTE
+ *
+ * mode quoted in state machine
+ */
+#define MODE_COMMENT_QUOTE	1
+
+/**
+ * \def MODE_COMMENT_DQUOTE
+ *
+ * mode double quoted in state machine
+ */
+#define MODE_COMMENT_DQUOTE	2
+
+/**
+ * \def STATE_INSIDE_ARG_BEG
+ *
+ * inside node state begining (attribute declaration)
+ */
+#define STATE_INSIDE_ARG_BEG	0
+
+/**
+ * \def STATE_INSIDE_ARG
+ *
+ * inside node state arg name
+ */
+#define STATE_INSIDE_ARG	1
+
+/**
+ * \def STATE_INSIDE_VAL_BEG
+ *
+ * inside node state arg value
+ */
+#define STATE_INSIDE_VAL_BEG	2
+
+/**
+ * \def STATE_INSIDE_VAL
+ *
+ * inside node state arg value
+ */
+#define STATE_INSIDE_VAL	3
+
+/**
+ * \def ROXML_WHITE(n)
+ *
+ * save current document position and recall to node
+ */
+#define ROXML_WHITE(n) ((n==' ')||(n=='\t')||(n=='\n')||(n=='\r'))
+
+#endif /* ROXML_DEF_H */
diff --git a/Libs/libroxml-2.3.0/src/roxml-doxy.h.in b/Libs/libroxml-2.3.0/src/roxml-doxy.h.in
new file mode 100644
index 0000000000000000000000000000000000000000..a3c1c234117c01e459d3e3a1df54fe8b9a40822b
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-doxy.h.in
@@ -0,0 +1,293 @@
+/** \file roxml-doxy.h
+ *  \brief doxygen source documentation for libroxml.so
+ *
+ * This is the header file used to develop some
+ * softwares using the libroxml.so library.
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 23 Dec 2008
+ *
+ * Copyright (C) 2009 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/** \mainpage libroxml homepage
+ *
+ * \section intro_sec <introduction>
+ * This library is minimum, easy-to-use, C implementation for xml file parsing
+ * It includes:
+ * <ul>
+ * <li>the library \b libroxml for xml parsing inside applications.</li>
+ * <li>the binary \b roxml, an xpath resolver that can be used from shell.</li>
+ * <li>the module \b fuse.xml that can be used to mount an XML file as a filesystem.</li>
+ * <li>the full \ref public-api and \ref priv-api documentation.</li>
+ * </ul>
+ *
+ * The stripped binary is about 50K. The public API defines less than 30 functions to do all you need, making it very easy to start with.
+ * For bug reporting, you can check the google code dedicated project: http://libroxml.googlecode.com
+ *
+ * Libroxml is distributed under the terms of the <a href="http://www.gnu.org/licenses/lgpl.html">GNU Lesser General Public License</a>.
+ * 
+ * \section intro_end </introduction>
+ * \section dl_sec <downloads>
+ * The source code is available from google project GIT repository: 
+ * \verbatim $> git clone https://code.google.com/p/libroxml \endverbatim
+ *
+ * You can download source packages:
+ * <ul>
+ * <li>Lastest version is @PACKAGE_VERSION@: <a href="http://download.libroxml.net/pool/v2.x/libroxml-@PACKAGE_VERSION@.tar.gz">download now</a></li>
+ * <li>Go to the download section if you need older libroxml revision: http://download.libroxml.net </li>
+ * </ul>
+ * 
+ * \section dl_end </downloads>
+ * \section what_sec <why libroxml>
+ * Because XML parsing is always hard to reinvent, and because very often xml lib are 
+ * too big to fit with very little application. Libroxml target mainly embedded software and environment, but you can use it whenever you need to deal with XML since libroxml is ligth and fast. 
+ * libroxml is now provided in buildroot (http://buildroot.uclibc.org).
+ *
+ * libroxml allow you to easily:
+ * <ul>
+ * <li> load / unload XML document from buffers or files.</li>
+ * <li> navigate thru an xml tree using simple getter API.</li>
+ * <li> handle namespace.</li>
+ * <li> use xpath syntax to access some nodes in the XML tree.</li>
+ * <li> read nodes contents (text, attributes, comments ...)</li>
+ * <li> create/modify xml trees and save them to a file or buffer.</li>
+ *</ul>
+ *
+ * \note libroxml work with both strict XML documents but also with xml like formatted documents (without any <?xml?> definition...)
+ * \warning libroxml may behave strangely when dealing with node names or attribute values bigger than 512 bytes. FOr those who really need it, they can increase this limit by modifying the ROXML_BASE_LEN define in roxml-defines.h.
+ * \warning libroxml do not handle DOCTYPE nodes. However, it will nicely ignore them during parsing and will still return the xml tree.
+ * \warning libroxml is not thread safe for all write operations (roxml_set_ns, roxml_add_node, roxml_del_node) therefore, those functions must be granted exclusiv access to the xml tree when called. On the other hand, all other functions can be safely called simultaneously.
+ *
+ * \section what_end </why libroxml>
+ * \section how_sec <how does it work>
+ * You can refer to \ref public-api for documentation on all functions
+ *
+ * there are several groups of functions in public API: 
+ * <ul>
+ * <li> Load and close XML data from different sources.</li>
+ * <li> Get nodes and navigate into the loaded xml tree.</li>
+ * <li> Get the xml content of nodes, attributes...</li>
+ * <li> Create and delete nodes, export tree.</li>
+ * <li> Some libroxml specific functions for memory handling</li>
+ * </ul>
+ * \section how_end </how does it work>
+ */
+
+/** \page public-api public API
+ *
+ * <div class="api">
+ * <table>
+ * <tr>
+ * <td>
+ * <h2>Manage xml source</h2>
+ * <ul>
+ * <li>\ref roxml_load_fd</li>
+ * <li>\ref roxml_load_doc</li>
+ * <li>\ref roxml_load_buf</li>
+ * <li>\ref roxml_close</li>
+ * </ul>
+ * 
+ * <h2>Access xml content</h2>
+ * <ul>
+ * <li>\ref roxml_get_type</li>
+ * <li>\ref roxml_get_node_position</li>
+ * <li>\ref roxml_get_name</li>
+ * <li>\ref roxml_get_content</li>
+ * </ul>
+ * </td>
+ * <td>
+ * <h2>Navigate into xml tree</h2>
+ * <ul>
+ * <li>\ref roxml_get_root</li>
+ * <li>\ref roxml_get_parent</li>
+ * <li>\ref roxml_get_prev_sibling</li>
+ * <li>\ref roxml_get_next_sibling</li>
+ * <li>\ref roxml_get_ns</li>
+ * <li>\ref roxml_get_chld</li>
+ * <li>\ref roxml_get_chld_nb</li>
+ * <li>\ref roxml_get_attr</li>
+ * <li>\ref roxml_get_attr_nb</li>
+ * <li>\ref roxml_get_txt</li>
+ * <li>\ref roxml_get_txt_nb</li>
+ * <li>\ref roxml_get_pi</li>
+ * <li>\ref roxml_get_pi_nb</li>
+ * <li>\ref roxml_get_cmt</li>
+ * <li>\ref roxml_get_cmt_nb</li>
+ * <li>\ref roxml_get_nodes</li>
+ * <li>\ref roxml_get_nodes_nb</li>
+ * <li>\ref roxml_xpath</li>
+ * </ul>
+ * </td>
+ * <td>
+ * <h2>Modify xml tree</h2>
+ * <ul>
+ * <li>\ref roxml_set_ns</li>
+ * <li>\ref roxml_add_node</li>
+ * <li>\ref roxml_del_node</li>
+ * <li>\ref roxml_commit_changes</li>
+ * </ul>
+ *
+ * <h2>Libroxml specifics</h2>
+ * <ul>
+ * <li>\ref roxml_release</li>
+ * </ul>
+ * </td>
+ * </tr>
+ * </table>
+ * </div>
+ */
+
+/** \page priv-api private API
+ * This is the documentation for private API. Users of libroxml should not need to go there. However, if you need to hack into library, understand how things are done, or correct a bug, feel free to dive in...
+ * <div class="api">
+ * <table>
+ * <tr>
+ * <td>
+ * <h2>low level node handling</h2>
+ * <ul>
+ * <li>\ref roxml_free_node</li>
+ * <li>\ref roxml_create_node</li>
+ * <li>\ref roxml_del_tree</li>
+ * <li>\ref roxml_close_node</li>
+ * <li>\ref roxml_load</li>
+ * <li>\ref roxml_parent_node</li>
+ * <li>\ref roxml_process_begin_node</li>
+ * </ul>
+ *
+ * <h2>misc functions</h2>
+ * <ul>
+ * <li>\ref roxml_malloc</li>
+ * <li>\ref roxml_read</li>
+ * <li>\ref roxml_is_separator</li>
+ * </ul>
+ * </td>
+ * <td>
+ * <h2>low level xpath functions</h2>
+ * <ul>
+ * <li>\ref roxml_set_axes</li>
+ * <li>\ref roxml_parse_xpath</li>
+ * <li>\ref roxml_free_xcond</li>
+ * <li>\ref roxml_free_xpath</li>
+ * <li>\ref roxml_double_cmp</li>
+ * <li>\ref roxml_double_oper</li>
+ * <li>\ref roxml_validate_predicat</li>
+ * <li>\ref roxml_validate_axes</li>
+ * <li>\ref roxml_check_node</li>
+ * <li>\ref roxml_compute_and</li>
+ * <li>\ref roxml_compute_or</li>
+ * <li>\ref roxml_exec_xpath</li>
+ * </ul>
+ * </td>
+ * <td>
+ * <h2>node set handling</h2>
+ * <ul>
+ * <li>\ref roxml_request_id</li>
+ * <li>\ref roxml_release_id</li>
+ * <li>\ref roxml_add_to_pool</li>
+ * <li>\ref roxml_del_from_pool</li>
+ * <li>\ref roxml_in_pool</li>
+ * </ul>
+ *
+ * <h2>modifications handling</h2>
+ * <ul>
+ * <li>\ref roxml_print_space</li>
+ * <li>\ref roxml_write_string</li>
+ * <li>\ref roxml_write_node</li>
+ * <li>\ref roxml_del_arg_node</li>
+ * <li>\ref roxml_del_txt_node</li>
+ * <li>\ref roxml_del_std_node</li>
+ * <li>\ref roxml_set_type</li>
+ * <li>\ref roxml_get_node_internal_position</li>
+ * </ul>
+ * </td>
+ * </tr>
+ * </table>
+ * </div>
+ */
+
+/** \page xpath xpath handling
+ * <div class="xpath">
+ * \section rel-xpath Relative xpath
+ * <table border="0">
+ * <tr><td> starting point from any given node</td><td><i>n1/n2/n3</i></td></tr>
+ * </table border="0">
+ *
+ * \section abs-xpath Absolute xpath
+ * <table border="0">
+ * <tr><td> starting point form root even if current node is different</td><td><i>/n0/n1/n2/n3</i></td></tr>
+ * </table border="0">
+ *
+ * \section spec-nodes Special Nodes
+ * <table border="0">
+ * <tr><td>access all nodes</td><td><i>*</i></td></tr>
+ * <tr><td>access only element nodes</td><td><i>node()</i></td></tr>
+ * <tr><td>access only text nodes</td><td>text()</td></tr>
+ * <tr><td>access only comment nodes</td><td><i>comment()</i></td></tr>
+ * <tr><td>access only processing-instruction nodes</td><td><i>processing-instruction()</i></td></tr>
+ * </table border="0">
+ *
+ * \section cond Conditions
+ * <table border="0">
+ * <tr><td>Attribute string value</td><td><i>/n0[@a=value]</i></td></tr>
+ * <tr><td>Attribute int value</td><td><i>/n0[\@a=value]</i></td></tr>
+ * <tr><td>Attribute int value</td><td><i>/n0[\@a!=value]</i></td></tr>
+ * <tr><td>Attribute int value</td><td><i>/n0[\@a<value]</i></td></tr>
+ * <tr><td>Attribute int value</td><td><i>/n0[\@a>value]</i></td></tr>
+ * <tr><td>Attribute int value</td><td><i>/n0[\@a<=value]</i></td></tr>
+ * <tr><td>Attribute int value</td><td><i>/n0[\@a>=value]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[first()]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[first()+2]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[last()]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[last()-3]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() = 0]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() != 0]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() > 1]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() < 2]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() >= 1]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() <= 2]</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[position() <= 2]/n1</i></td></tr>
+ * <tr><td>Node position</td><td><i>/n0[2]</i></td></tr>
+ * <tr><td>Node with namespace</td><td><i>//*[namespace-uri() = 'http://test.com']</i></td></tr>
+ * <tr><td>Other xpath</td><td><i>/n0[n1/\@attr]</i></td></tr>
+ * </table border="0">
+ *
+ * \section short-xpath Shorten xpath
+ * <table border="0">
+ * <tr><td>Children</td><td><i>/n0/n1/n2</i></td></tr>
+ * <tr><td>Attributes</td><td><i>/n0/n1/\@a</i></td></tr>
+ * <tr><td>Descendent or self::<i>node()</td><td>/n0//n3</i></td></tr>
+ * <tr><td>Parent</td><td><i>/n0/n1/../n1/n2</i></td></tr>
+ * <tr><td>Self</td><td><i>/n0/n1/./n2</i></td></tr>
+ * <tr><td>Node in namespaces</td><td><i>/test::n0</i></td></tr>
+ * </table border="0">
+ *
+ * \section full-xpath Full xpath
+ * <table border="0">
+ * <tr><td>Nodes</td><td><i>/n0/n1/child::a</i></td></tr>
+ * <tr><td>Attributes</td><td><i>/n0/n1/attribute::a</i></td></tr>
+ * <tr><td>Descendent or self</td><td><i>/n0/descendant-or-self::n5</i></td></tr>
+ * <tr><td>Parent</td><td><i>/child::n0/child::n1/parent::/n1</i></td></tr>
+ * <tr><td>Self</td><td><i>/child::n0/child::n1/self::</i></td></tr>
+ * <tr><td>Preceding</td><td><i>preceding::n1</i></td></tr>
+ * <tr><td>Following</td><td><i>following::n1</i></td></tr>
+ * <tr><td>Ancestor</td><td><i>ancestor::n2</i></td></tr>
+ * <tr><td>Ancestor-or-self</td><td><i>ancestor-or-self::n2</i></td></tr>
+ * <tr><td>Namespace</td><td><i>namespace::test</i></td></tr>
+ * </table border="0">
+ * </div>
+ */
diff --git a/Libs/libroxml-2.3.0/src/roxml-internal.c b/Libs/libroxml-2.3.0/src/roxml-internal.c
new file mode 100644
index 0000000000000000000000000000000000000000..93d254a1b77fc2252f1c041d0417ade58e7d924b
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-internal.c
@@ -0,0 +1,1752 @@
+/** \file roxml-internal.c
+ *  \brief source for libroxml.so
+ *
+ * This is the source file for lib libroxml.so internal functions
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 11 Jan 2010
+ *
+ * Copyright (C) 2010 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "roxml-internal.h"
+#include "roxml-parse-engine.h"
+
+#ifdef __DEBUG
+unsigned int _nb_node = 0;
+unsigned int _nb_attr = 0;
+unsigned int _nb_text = 0;
+#endif
+
+/** \brief head of memory manager */
+memory_cell_t head_cell = { PTR_NONE, 0, NULL, 0, NULL, NULL };
+
+void ROXML_INT *roxml_malloc(int size, int num, int type)
+{
+	memory_cell_t *cell = &head_cell;
+	while (cell->next != NULL) {
+		cell = cell->next;
+	}
+	cell->next = (memory_cell_t *) malloc(sizeof(memory_cell_t));
+	if (!cell->next) {
+		return NULL;
+	}
+	cell->next->next = NULL;
+	cell->next->prev = cell;
+	cell = cell->next;
+	cell->type = type;
+	cell->id = pthread_self();
+	cell->occ = size;
+	cell->ptr = calloc(num, size);
+	head_cell.prev = cell;
+	return cell->ptr;
+}
+
+int ROXML_INT roxml_read(int pos, int size, char *buffer, node_t *node)
+{
+	int ret_len = 0;
+
+	if (size > 0 && buffer) {
+		if (node->type & ROXML_FILE) {
+			if (fseek(node->src.fil, pos, SEEK_SET) == 0) {
+				ret_len = fread(buffer, 1, size, node->src.fil);
+			}
+		} else {
+			char *r1 = buffer;
+			char const *r2 = node->src.buf + pos;
+
+			while (size-- && (*r1++ = *r2++)) ;
+			ret_len = r1 - buffer;
+		}
+	}
+	return ret_len;
+}
+
+node_t ROXML_INT *roxml_create_node(int pos, void *src, int type)
+{
+	node_t *n = (node_t *) calloc(1, sizeof(node_t));
+	n->type = type;
+	n->src.src = src;
+	n->pos = pos;
+	n->end = pos;
+
+	return n;
+}
+
+void ROXML_INT roxml_close_node(node_t *n, node_t * close)
+{
+	if (n) {
+		n->end = close->pos;
+		free(close);
+
+#ifdef __DEBUG
+		if (n->type & ROXML_ELM_NODE)
+			_nb_node++;
+		if (n->type & ROXML_ATTR_NODE)
+			_nb_attr++;
+		if (n->type & ROXML_TXT_NODE)
+			_nb_text++;
+#endif
+	}
+}
+
+void ROXML_INT roxml_free_node(node_t *n)
+{
+	if (!n) {
+		return;
+	}
+
+	if (n->type & ROXML_PENDING) {
+		if (n->pos == 0) {
+			free(n->src.buf);
+		}
+	}
+
+	if (n->priv) {
+		unsigned char id = *(unsigned char *)n->priv;
+
+		if (id == ROXML_REQTABLE_ID) {
+			xpath_tok_t *tok;
+			xpath_tok_table_t *table = (xpath_tok_table_t *) n->priv;
+			tok = table->next;
+			pthread_mutex_destroy(&table->mut);
+			free(table);
+			while (tok) {
+				xpath_tok_t *to_delete = tok;
+				tok = tok->next;
+				free(to_delete);
+			}
+		} else if (id == ROXML_NS_ID) {
+			roxml_ns_t *ns = (roxml_ns_t *) n->priv;
+			free(ns);
+		}
+	}
+	free(n);
+}
+
+void ROXML_INT roxml_del_tree(node_t *n)
+{
+	if (n == NULL) {
+		return;
+	}
+	roxml_del_tree(n->chld);
+	roxml_del_tree(n->sibl);
+	roxml_del_tree(n->attr);
+	roxml_free_node(n);
+}
+
+int roxml_is_number(char *input)
+{
+	char *end;
+	int is_number = 0;
+
+	/*
+	 * we don't need the value per se and some compiler will
+	 * complain about an initialized but unused variable if we
+	 * get it.
+	 */
+	strtod(input, &end);
+
+	if ((end == NULL) || (roxml_is_separator(end[0])) || (end[0] == '"') || (end[0] == '\'') || (end[0] == '\0')) {
+		is_number = 1;
+	}
+
+	return is_number;
+}
+
+int ROXML_INT roxml_is_separator(char sep)
+{
+	int i = 0;
+	char separators[32] = "\r\t\n ";
+	while (separators[i] != 0) {
+		if (sep == separators[i]) {
+			return 1;
+		}
+		i++;
+	}
+	return 0;
+}
+
+void ROXML_INT roxml_process_unaliased_ns(roxml_load_ctx_t * context)
+{
+	if (context->nsdef) {
+		context->nsdef = 0;
+		context->candidat_arg->type |= ROXML_NS_NODE;
+
+		if (context->candidat_val->pos == context->candidat_val->end) {
+			context->candidat_node->ns = NULL;
+			context->candidat_arg->ns = NULL;
+		} else {
+			roxml_ns_t *ns = calloc(1, sizeof(roxml_ns_t) + 1);
+			ns->id = ROXML_NS_ID;
+			ns->alias = (char *)ns + sizeof(roxml_ns_t);
+
+			context->candidat_arg->priv = ns;
+			context->candidat_arg->ns = context->candidat_arg;
+			context->candidat_node->ns = context->candidat_arg;
+
+			context->namespaces = context->candidat_arg;
+		}
+	}
+}
+
+void ROXML_INT roxml_process_begin_node(roxml_load_ctx_t * context, int position)
+{
+	if (context->candidat_txt) {
+#ifdef IGNORE_EMPTY_TEXT_NODES
+		if (context->empty_text_node == 0) {
+#endif /* IGNORE_EMPTY_TEXT_NODES */
+			node_t *to_be_closed =
+			    roxml_create_node(position, context->src, ROXML_TXT_NODE | context->type);
+			context->candidat_txt = roxml_append_node(context->current_node, context->candidat_txt);
+			roxml_close_node(context->candidat_txt, to_be_closed);
+			context->current_node = context->candidat_txt->prnt;
+#ifdef IGNORE_EMPTY_TEXT_NODES
+		} else {
+			roxml_free_node(context->candidat_txt);
+		}
+#endif /* IGNORE_EMPTY_TEXT_NODES */
+		context->candidat_txt = NULL;
+	}
+	context->candidat_node = roxml_create_node(position, context->src, ROXML_ELM_NODE | context->type);
+}
+
+node_t ROXML_INT *roxml_load(node_t *current_node, FILE * file, char *buffer)
+{
+	int error = 0;
+	roxml_load_ctx_t context;
+	roxml_parser_item_t *parser = NULL;
+	xpath_tok_table_t *table = (xpath_tok_table_t *) calloc(1, sizeof(xpath_tok_table_t));
+
+	memset(&context, 0, sizeof(roxml_load_ctx_t));
+	context.empty_text_node = 1;
+	context.current_node = current_node;
+
+	parser = roxml_append_parser_item(parser, " ", _func_load_white);
+	parser = roxml_append_parser_item(parser, "<", _func_load_open_node);
+	parser = roxml_append_parser_item(parser, ">", _func_load_close_node);
+	parser = roxml_append_parser_item(parser, "/", _func_load_end_node);
+	parser = roxml_append_parser_item(parser, "'", _func_load_quoted);
+	parser = roxml_append_parser_item(parser, "\"", _func_load_dquoted);
+	parser = roxml_append_parser_item(parser, "\t", _func_load_white);
+	parser = roxml_append_parser_item(parser, "\n", _func_load_white);
+	parser = roxml_append_parser_item(parser, "\r", _func_load_white);
+	parser = roxml_append_parser_item(parser, "!", _func_load_open_spec_node);
+	parser = roxml_append_parser_item(parser, "]", _func_load_close_cdata);
+	parser = roxml_append_parser_item(parser, "-", _func_load_close_comment);
+	parser = roxml_append_parser_item(parser, "?", _func_load_close_pi);
+	parser = roxml_append_parser_item(parser, ":", _func_load_colon);
+	parser = roxml_append_parser_item(parser, NULL, _func_load_default);
+
+	parser = roxml_parser_prepare(parser);
+
+	if (file) {
+		char *int_buffer;
+		int circle = 0;
+		int int_len = 0;
+
+		context.type = ROXML_FILE;
+		context.src = (void *)file;
+		context.pos = 0;
+
+		int_buffer = malloc(ROXML_BULK_READ + 1);
+
+		do {
+			int ret = 0;
+			int chunk_len = 0;
+			int_len = fread(int_buffer + circle, 1, ROXML_BULK_READ - circle, file) + circle;
+			int_buffer[int_len] = '\0';
+
+			if (int_len == ROXML_BULK_READ) {
+				chunk_len = int_len - ROXML_BASE_LEN;
+			} else {
+				chunk_len = int_len;
+			}
+
+			ret = roxml_parse_line(parser, int_buffer, chunk_len, &context);
+			circle = int_len - ret;
+			if ((ret < 0) || (circle < 0)) {
+				error = 1;
+				break;
+			}
+			memmove(int_buffer, int_buffer + ret, circle);
+		} while (int_len == ROXML_BULK_READ);
+
+		free(int_buffer);
+	} else {
+		int ret = 0;
+		context.type = ROXML_BUFF;
+		context.src = (void *)buffer;
+		ret = roxml_parse_line(parser, buffer, 0, &context);
+		if (ret < 0) {
+			error = 1;
+		}
+	}
+
+	roxml_parser_free(parser);
+
+	if (context.empty_text_node == 1) {
+		roxml_free_node(context.candidat_txt);
+	}
+
+	if (!error) {
+		node_t *virtroot = NULL;
+		current_node = roxml_get_root(current_node);
+		virtroot = current_node;
+		while (virtroot->prnt) {
+			virtroot = virtroot->prnt;
+		}
+
+		table->id = ROXML_REQTABLE_ID;
+		table->ids[ROXML_REQTABLE_ID] = 1;
+		pthread_mutex_init(&table->mut, NULL);
+		virtroot->priv = (void *)table;
+	} else {
+		free(table);
+		roxml_close(current_node);
+		return NULL;
+	}
+
+	return current_node;
+}
+
+node_t ROXML_INT *roxml_lookup_nsdef(node_t *nsdef, char *ns)
+{
+	int len = 0;
+	char namespace[MAX_NS_LEN];
+
+	for (len = 0; ns[len] != '\0' && ns[len] != ':'; len++) {
+		namespace[len] = ns[len];
+	}
+	namespace[len] = '\0';
+
+	while (nsdef) {
+		if (nsdef->priv && strcmp(namespace, ((roxml_ns_t *) nsdef->priv)->alias) == 0) {
+			break;
+		}
+		nsdef = nsdef->next;
+	}
+	return nsdef;
+}
+
+void ROXML_INT roxml_set_type(node_t *n, int type)
+{
+	n->type &= ~(ROXML_ATTR_NODE | ROXML_ELM_NODE | ROXML_TXT_NODE | ROXML_CMT_NODE | ROXML_PI_NODE);
+	n->type |= type;
+}
+
+xpath_node_t ROXML_INT *roxml_set_axes(xpath_node_t *node, char *axes, int *offset)
+{
+	struct _xpath_axes {
+		char id;
+		char *name;
+	};
+
+	struct _xpath_axes xpath_axes[14] = {
+		{ROXML_ID_PARENT, ROXML_L_PARENT},
+		{ROXML_ID_PARENT, ROXML_S_PARENT},
+		{ROXML_ID_SELF, ROXML_L_SELF},
+		{ROXML_ID_SELF, ROXML_S_SELF},
+		{ROXML_ID_ATTR, ROXML_L_ATTR},
+		{ROXML_ID_ATTR, ROXML_S_ATTR},
+		{ROXML_ID_ANC, ROXML_L_ANC},
+		{ROXML_ID_ANC_O_SELF, ROXML_L_ANC_O_SELF},
+		{ROXML_ID_NEXT_SIBL, ROXML_L_NEXT_SIBL},
+		{ROXML_ID_PREV_SIBL, ROXML_L_PREV_SIBL},
+		{ROXML_ID_NEXT, ROXML_L_NEXT},
+		{ROXML_ID_PREV, ROXML_L_PREV},
+		{ROXML_ID_NS, ROXML_L_NS},
+		{ROXML_ID_CHILD, ROXML_L_CHILD},
+	};
+
+	xpath_node_t *tmp_node;
+	if (axes[0] == '/') {
+		axes[0] = '\0';
+		*offset += 1;
+		axes++;
+	}
+	if (axes[0] == '/') {
+		// ROXML_S_DESC_O_SELF
+		node->axes = ROXML_ID_DESC_O_SELF;
+		node->name = axes + 1;
+		tmp_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+		tmp_node->axes = ROXML_ID_CHILD;
+		node->next = tmp_node;
+		if (strlen(node->name) > 0) {
+			tmp_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+			node->next->next = tmp_node;
+			node = roxml_set_axes(tmp_node, axes + 1, offset);
+		}
+	} else if (strncmp(ROXML_L_DESC_O_SELF, axes, strlen(ROXML_L_DESC_O_SELF)) == 0) {
+		// ROXML_L_DESC_O_SELF
+		node->axes = ROXML_ID_DESC_O_SELF;
+		node->name = axes + strlen(ROXML_L_DESC_O_SELF);
+		*offset += strlen(ROXML_L_DESC_O_SELF);
+		tmp_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+		tmp_node->axes = ROXML_ID_CHILD;
+		node->next = tmp_node;
+		node = roxml_set_axes(tmp_node, axes + strlen(ROXML_L_DESC_O_SELF), offset);
+	} else if (strncmp(ROXML_L_DESC, axes, strlen(ROXML_L_DESC)) == 0) {
+		// ROXML_L_DESC
+		node->axes = ROXML_ID_DESC;
+		node->name = axes + strlen(ROXML_L_DESC);
+		*offset += strlen(ROXML_L_DESC);
+		tmp_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+		tmp_node->axes = ROXML_ID_CHILD;
+		node->next = tmp_node;
+		node = roxml_set_axes(tmp_node, axes + strlen(ROXML_L_DESC), offset);
+	} else {
+		int i = 0;
+
+		// ROXML_S_CHILD is default
+		node->axes = ROXML_ID_CHILD;
+		node->name = axes;
+
+		for (i = 0; i < 14; i++) {
+			int len = strlen(xpath_axes[i].name);
+			if (strncmp(xpath_axes[i].name, axes, len) == 0) {
+				node->axes = xpath_axes[i].id;
+				node->name = axes + len;
+				break;
+			}
+		}
+	}
+	return node;
+}
+
+int ROXML_INT roxml_get_node_internal_position(node_t *n)
+{
+	int idx = 1;
+	node_t *prnt;
+	node_t *first;
+	if (n == NULL) {
+		return 0;
+	}
+
+	prnt = n->prnt;
+	if (!prnt) {
+		return 1;
+	}
+	first = prnt->chld;
+
+	while ((first) && (first != n)) {
+		idx++;
+		first = first->sibl;
+	}
+
+	return idx;
+}
+
+#if(CONFIG_XML_XPATH_ENGINE==1)
+int ROXML_INT roxml_parse_xpath(char *path, xpath_node_t **xpath, int context)
+{
+	int ret = 0;
+	roxml_xpath_ctx_t ctx;
+	roxml_parser_item_t *parser = NULL;
+	ctx.pos = 0;
+	ctx.nbpath = 1;
+	ctx.bracket = 0;
+	ctx.parenthesys = 0;
+	ctx.quoted = 0;
+	ctx.dquoted = 0;
+	ctx.content_quoted = 0;
+	ctx.is_first_node = 1;
+	ctx.wait_first_node = 1;
+	ctx.shorten_cond = 0;
+	ctx.context = context;
+	ctx.first_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+	ctx.new_node = ctx.first_node;
+	ctx.new_cond = NULL;
+	ctx.first_node->rel = ROXML_OPERATOR_OR;
+
+	parser = roxml_append_parser_item(parser, " ", _func_xpath_ignore);
+	parser = roxml_append_parser_item(parser, "\t", _func_xpath_ignore);
+	parser = roxml_append_parser_item(parser, "\n", _func_xpath_ignore);
+	parser = roxml_append_parser_item(parser, "\r", _func_xpath_ignore);
+	parser = roxml_append_parser_item(parser, "\"", _func_xpath_dquote);
+	parser = roxml_append_parser_item(parser, "\'", _func_xpath_quote);
+	parser = roxml_append_parser_item(parser, "/", _func_xpath_new_node);
+	parser = roxml_append_parser_item(parser, "(", _func_xpath_open_parenthesys);
+	parser = roxml_append_parser_item(parser, ")", _func_xpath_close_parenthesys);
+	parser = roxml_append_parser_item(parser, "[", _func_xpath_open_brackets);
+	parser = roxml_append_parser_item(parser, "]", _func_xpath_close_brackets);
+	parser = roxml_append_parser_item(parser, "=", _func_xpath_operator_equal);
+	parser = roxml_append_parser_item(parser, ">", _func_xpath_operator_sup);
+	parser = roxml_append_parser_item(parser, "<", _func_xpath_operator_inf);
+	parser = roxml_append_parser_item(parser, "!", _func_xpath_operator_diff);
+	parser = roxml_append_parser_item(parser, "0", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "1", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "2", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "3", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "4", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "5", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "6", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "7", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "8", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "9", _func_xpath_number);
+	parser = roxml_append_parser_item(parser, "+", _func_xpath_operator_add);
+	parser = roxml_append_parser_item(parser, "-", _func_xpath_operator_subs);
+	parser = roxml_append_parser_item(parser, ROXML_PATH_OR, _func_xpath_path_or);
+	parser = roxml_append_parser_item(parser, ROXML_COND_OR, _func_xpath_condition_or);
+	parser = roxml_append_parser_item(parser, ROXML_COND_AND, _func_xpath_condition_and);
+	parser = roxml_append_parser_item(parser, ROXML_FUNC_POS_STR, _func_xpath_position);
+	parser = roxml_append_parser_item(parser, ROXML_FUNC_FIRST_STR, _func_xpath_first);
+	parser = roxml_append_parser_item(parser, ROXML_FUNC_LAST_STR, _func_xpath_last);
+	parser = roxml_append_parser_item(parser, ROXML_FUNC_NSURI_STR, _func_xpath_nsuri);
+	parser = roxml_append_parser_item(parser, NULL, _func_xpath_default);
+
+	parser = roxml_parser_prepare(parser);
+	ret = roxml_parse_line(parser, path, 0, &ctx);
+	roxml_parser_free(parser);
+
+	if (ret >= 0) {
+		if (xpath) {
+			*xpath = ctx.first_node;
+		}
+		return ctx.nbpath;
+	}
+
+	roxml_free_xpath(ctx.first_node, ctx.nbpath);
+	return -1;
+}
+
+void ROXML_INT roxml_free_xcond(xpath_cond_t * xcond)
+{
+	if (xcond->next) {
+		roxml_free_xcond(xcond->next);
+	}
+	if (xcond->xp) {
+		roxml_free_xpath(xcond->xp, xcond->func2);
+	}
+	free(xcond);
+}
+
+void ROXML_INT roxml_free_xpath(xpath_node_t *xpath, int nb)
+{
+	int i = 0;
+	for (i = 0; i < nb; i++) {
+		if (xpath[i].next) {
+			roxml_free_xpath(xpath[i].next, 1);
+		}
+		if (xpath[i].cond) {
+			roxml_free_xcond(xpath[i].cond);
+		}
+		free(xpath[i].xp_cond);
+	}
+	free(xpath);
+}
+
+double ROXML_INT roxml_double_oper(double a, double b, int op)
+{
+	if (op == ROXML_OPERATOR_ADD) {
+		return (a + b);
+	} else if (op == ROXML_OPERATOR_SUB) {
+		return (a - b);
+	} else if (op == ROXML_OPERATOR_MUL) {
+		return (a * b);
+	} else if (op == ROXML_OPERATOR_DIV) {
+		return (a / b);
+	}
+	return 0;
+}
+
+int ROXML_INT roxml_double_cmp(double a, double b, int op)
+{
+	if (op == ROXML_OPERATOR_DIFF) {
+		return (a != b);
+	} else if (op == ROXML_OPERATOR_EINF) {
+		return (a <= b);
+	} else if (op == ROXML_OPERATOR_INF) {
+		return (a < b);
+	} else if (op == ROXML_OPERATOR_ESUP) {
+		return (a >= b);
+	} else if (op == ROXML_OPERATOR_SUP) {
+		return (a > b);
+	} else if (op == ROXML_OPERATOR_EQU) {
+		return (a == b);
+	}
+	return 0;
+}
+
+int ROXML_INT roxml_string_cmp(char *sa, char *sb, int op)
+{
+	int result;
+
+	result = strcmp(sa, sb);
+
+	if (op == ROXML_OPERATOR_DIFF) {
+		return (result != 0);
+	} else if (op == ROXML_OPERATOR_EINF) {
+		return (result <= 0);
+	} else if (op == ROXML_OPERATOR_INF) {
+		return (result < 0);
+	} else if (op == ROXML_OPERATOR_ESUP) {
+		return (result >= 0);
+	} else if (op == ROXML_OPERATOR_SUP) {
+		return (result > 0);
+	} else if (op == ROXML_OPERATOR_EQU) {
+		return (result == 0);
+	}
+	return 0;
+}
+
+int ROXML_INT roxml_validate_predicat(xpath_node_t *xn, node_t * candidat)
+{
+	int first = 1;
+	int valid = 0;
+	xpath_cond_t *condition;
+
+	if (xn == NULL) {
+		return 1;
+	}
+
+	condition = xn->cond;
+
+	if (!condition) {
+		return 1;
+	}
+
+	while (condition) {
+		int status = 0;
+		double iarg1;
+		double iarg2;
+		char *sarg1;
+		char *sarg2;
+
+		if (condition->func == ROXML_FUNC_POS) {
+			status = 0;
+			iarg2 = atof(condition->arg2);
+			if (xn->name[0] == '*') {
+				iarg1 = roxml_get_node_internal_position(candidat);
+			} else {
+				iarg1 = roxml_get_node_position(candidat);
+			}
+			status = roxml_double_cmp(iarg1, iarg2, condition->op);
+		} else if (condition->func == ROXML_FUNC_LAST) {
+			status = 0;
+			iarg2 = roxml_get_chld_nb(candidat->prnt);
+			if (xn->name[0] == '*') {
+				iarg1 = roxml_get_node_internal_position(candidat);
+			} else {
+				iarg1 = roxml_get_node_position(candidat);
+			}
+			if (condition->op > 0) {
+				double operand = 0;
+				operand = atof(condition->arg2);
+				iarg2 = roxml_double_oper(iarg2, operand, condition->op);
+			}
+			status = roxml_double_cmp(iarg1, iarg2, ROXML_OPERATOR_EQU);
+		} else if (condition->func == ROXML_FUNC_FIRST) {
+			status = 0;
+			iarg2 = 1;
+			if (xn->name[0] == '*') {
+				iarg1 = roxml_get_node_internal_position(candidat);
+			} else {
+				iarg1 = roxml_get_node_position(candidat);
+			}
+			if (condition->op > 0) {
+				double operand = 0;
+				operand = atof(condition->arg2);
+				iarg2 = roxml_double_oper(iarg2, operand, condition->op);
+			}
+			status = roxml_double_cmp(iarg1, iarg2, ROXML_OPERATOR_EQU);
+		} else if (condition->func == ROXML_FUNC_INTCOMP) {
+			node_t *val = roxml_get_attr(candidat, condition->arg1 + 1, 0);
+			status = 0;
+			if (val) {
+				ROXML_GET_BASE_BUFFER(strval);
+				iarg1 = atof(roxml_get_content(val, strval, ROXML_BASE_LEN, &status));
+				if (status >= ROXML_BASE_LEN) {
+					iarg1 = atof(roxml_get_content(val, NULL, 0, &status));
+					roxml_release(RELEASE_LAST);
+				}
+				iarg2 = atof(condition->arg2);
+				status = roxml_double_cmp(iarg1, iarg2, condition->op);
+				ROXML_PUT_BASE_BUFFER(strval);
+			}
+		} else if (condition->func == ROXML_FUNC_NSURI) {
+			node_t *val = roxml_get_ns(candidat);
+			status = 0;
+			if (val) {
+				ROXML_GET_BASE_BUFFER(strval);
+				sarg1 = roxml_get_content(val, strval, ROXML_BASE_LEN, &status);
+				if (status >= ROXML_BASE_LEN) {
+					sarg1 = roxml_get_content(val, NULL, 0, &status);
+				}
+				sarg2 = condition->arg2;
+				status = roxml_string_cmp(sarg1, sarg2, condition->op);
+				roxml_release(sarg1);
+				ROXML_PUT_BASE_BUFFER(strval);
+			} else {
+				sarg2 = condition->arg2;
+				status = roxml_string_cmp("", sarg2, condition->op);
+			}
+		} else if (condition->func == ROXML_FUNC_STRCOMP) {
+			node_t *val = roxml_get_attr(candidat, condition->arg1 + 1, 0);
+			status = 0;
+			if (val) {
+				ROXML_GET_BASE_BUFFER(strval);
+				sarg1 = roxml_get_content(val, strval, ROXML_BASE_LEN, &status);
+				if (status >= ROXML_BASE_LEN) {
+					sarg1 = roxml_get_content(val, NULL, 0, &status);
+				}
+				sarg2 = condition->arg2;
+				status = roxml_string_cmp(sarg1, sarg2, condition->op);
+				roxml_release(sarg1);
+				ROXML_PUT_BASE_BUFFER(strval);
+			}
+		} else if (condition->func == ROXML_FUNC_XPATH) {
+			int index = condition->func2;
+			int count = 0;
+			node_t *root = roxml_get_root(candidat);
+			node_t **node_set;
+			status = 0;
+
+			node_set = roxml_exec_xpath(root, candidat, condition->xp, index, &count);
+
+			roxml_release(node_set);
+
+			if (count > 0) {
+				status = 1;
+			}
+
+		}
+
+		if (first) {
+			valid = status;
+			first = 0;
+		} else {
+			if (condition->rel == ROXML_OPERATOR_OR) {
+				valid = valid || status;
+			} else if (condition->rel == ROXML_OPERATOR_AND) {
+				valid = valid && status;
+			}
+		}
+		condition = condition->next;
+	}
+
+	return valid;
+}
+
+int ROXML_INT roxml_request_id(node_t *root)
+{
+	int i = 0;
+	xpath_tok_table_t *table;
+
+	while (root->prnt) {
+		root = root->prnt;
+	}
+
+	table = (xpath_tok_table_t *) root->priv;
+
+	pthread_mutex_lock(&table->mut);
+	for (i = ROXML_XPATH_FIRST_ID; i < 255; i++) {
+		if (table->ids[i] == 0) {
+			table->ids[i]++;
+			pthread_mutex_unlock(&table->mut);
+			return i;
+		}
+	}
+	pthread_mutex_unlock(&table->mut);
+	return -1;
+}
+
+int ROXML_INT roxml_in_pool(node_t *root, node_t * n, int req_id)
+{
+	xpath_tok_table_t *table;
+
+	while (root->prnt) {
+		root = root->prnt;
+	}
+
+	table = (xpath_tok_table_t *) root->priv;
+
+	pthread_mutex_lock(&table->mut);
+	if (n->priv) {
+		xpath_tok_t *tok = (xpath_tok_t *) n->priv;
+		if (tok->id == req_id) {
+			pthread_mutex_unlock(&table->mut);
+			return 1;
+		} else {
+			while (tok) {
+				if (tok->id == req_id) {
+					pthread_mutex_unlock(&table->mut);
+					return 1;
+				}
+				tok = tok->next;
+			}
+		}
+	}
+	pthread_mutex_unlock(&table->mut);
+	return 0;
+}
+
+void ROXML_INT roxml_release_id(node_t *root, node_t **pool, int pool_len, int req_id)
+{
+	int i = 0;
+	xpath_tok_table_t *table = NULL;
+
+	while (root->prnt) {
+		root = root->prnt;
+	}
+
+	table = (xpath_tok_table_t *) root->priv;
+
+	for (i = 0; i < pool_len; i++) {
+		roxml_del_from_pool(root, pool[i], req_id);
+	}
+	pthread_mutex_lock(&table->mut);
+	table->ids[req_id] = 0;
+	pthread_mutex_unlock(&table->mut);
+}
+
+void roxml_del_from_pool(node_t *root, node_t * n, int req_id)
+{
+	xpath_tok_table_t *table = NULL;
+
+	while (root->prnt) {
+		root = root->prnt;
+	}
+
+	table = (xpath_tok_table_t *) root->priv;
+
+	pthread_mutex_lock(&table->mut);
+	if (n->priv) {
+		xpath_tok_t *prev = (xpath_tok_t *) n->priv;
+		xpath_tok_t *tok = (xpath_tok_t *) n->priv;
+		if (tok->id == req_id) {
+			n->priv = (void *)tok->next;
+			free(tok);
+		} else {
+			while (tok) {
+				if (tok->id == req_id) {
+					prev->next = tok->next;
+					free(tok);
+					break;
+				}
+				prev = tok;
+				tok = tok->next;
+			}
+		}
+	}
+	pthread_mutex_unlock(&table->mut);
+}
+
+int ROXML_INT roxml_add_to_pool(node_t *root, node_t * n, int req_id)
+{
+	xpath_tok_table_t *table;
+	xpath_tok_t *tok;
+	xpath_tok_t *last_tok = NULL;
+
+	while (root->prnt) {
+		root = root->prnt;
+	}
+
+	if (req_id == 0) {
+		return 1;
+	}
+	table = (xpath_tok_table_t *) root->priv;
+
+	pthread_mutex_lock(&table->mut);
+	tok = (xpath_tok_t *) n->priv;
+
+	while (tok) {
+		if (tok->id == req_id) {
+			pthread_mutex_unlock(&table->mut);
+			return 0;
+		}
+		last_tok = tok;
+		tok = (xpath_tok_t *) tok->next;
+	}
+	if (last_tok == NULL) {
+		n->priv = calloc(1, sizeof(xpath_tok_t));
+		last_tok = (xpath_tok_t *) n->priv;
+	} else {
+		last_tok->next = (xpath_tok_t *) calloc(1, sizeof(xpath_tok_t));
+		last_tok = last_tok->next;
+	}
+	last_tok->id = req_id;
+	pthread_mutex_unlock(&table->mut);
+
+	return 1;
+}
+
+int ROXML_INT roxml_validate_axes(node_t *root, node_t * candidat, node_t *** ans, int *nb, int *max,
+				  xpath_node_t *xn, int req_id)
+{
+
+	int valid = 0;
+	int path_end = 0;
+	char *axes = NULL;
+
+	if (xn == NULL) {
+		valid = 1;
+		path_end = 1;
+	} else {
+		axes = xn->name;
+
+		if ((axes == NULL) || (strcmp("node()", axes) == 0)) {
+			valid = 1;
+		} else if (strcmp("*", axes) == 0) {
+			if (candidat->type & ROXML_ELM_NODE) {
+				valid = 1;
+			}
+			if (candidat->type & ROXML_ATTR_NODE) {
+				valid = 1;
+			}
+		} else if (strcmp("comment()", axes) == 0) {
+			if (candidat->type & ROXML_CMT_NODE) {
+				valid = 1;
+			}
+		} else if (strcmp("processing-instruction()", axes) == 0) {
+			if (candidat->type & ROXML_PI_NODE) {
+				valid = 1;
+			}
+		} else if (strcmp("text()", axes) == 0) {
+			if (candidat->type & ROXML_TXT_NODE) {
+				valid = 1;
+			}
+		} else if (strcmp("", axes) == 0) {
+			if (xn->abs) {
+				candidat = root;
+				valid = 1;
+			}
+		}
+		if (!valid) {
+			if (candidat->type & ROXML_PI_NODE) {
+				return 0;
+			}
+			if (candidat->type & ROXML_CMT_NODE) {
+				return 0;
+			}
+		}
+		if (xn->next == NULL) {
+			path_end = 1;
+		}
+		if ((xn->axes == ROXML_ID_SELF) || (xn->axes == ROXML_ID_PARENT)) {
+			valid = 1;
+		}
+	}
+
+	if (!valid) {
+		ROXML_GET_BASE_BUFFER(intern_buff);
+		int ns_len = 0;
+		char *name = intern_buff;
+		if (candidat->ns) {
+			name = roxml_get_name(candidat->ns, intern_buff, ROXML_BASE_LEN);
+			ns_len = strlen(name);
+			if (ns_len) {
+				name[ns_len] = ':';
+				ns_len++;
+			}
+		}
+		roxml_get_name(candidat, intern_buff + ns_len, ROXML_BASE_LEN - ns_len);
+		if (name && strcmp(name, axes) == 0) {
+			valid = 1;
+		}
+		ROXML_PUT_BASE_BUFFER(intern_buff);
+	}
+
+	if (valid) {
+		valid = roxml_validate_predicat(xn, candidat);
+	}
+
+	if ((valid) && (xn) && (xn->xp_cond)) {
+		int status;
+		xpath_cond_t *condition = xn->xp_cond;
+		valid = 0;
+		if (condition->func == ROXML_FUNC_STRCOMP) {
+			char *sarg1;
+			char *sarg2;
+			ROXML_GET_BASE_BUFFER(strval);
+			sarg1 = roxml_get_content(candidat, strval, ROXML_BASE_LEN, &status);
+			if (status >= ROXML_BASE_LEN) {
+				sarg1 = roxml_get_content(candidat, NULL, 0, &status);
+			}
+			sarg2 = condition->arg2;
+			valid = roxml_string_cmp(sarg1, sarg2, condition->op);
+			roxml_release(sarg1);
+			ROXML_PUT_BASE_BUFFER(strval);
+		} else if (condition->func == ROXML_FUNC_INTCOMP) {
+			double iarg1;
+			double iarg2;
+			ROXML_GET_BASE_BUFFER(strval);
+			iarg1 = atof(roxml_get_content(candidat, strval, ROXML_BASE_LEN, &status));
+			if (status >= ROXML_BASE_LEN) {
+				iarg1 = atof(roxml_get_content(candidat, NULL, 0, &status));
+				roxml_release(RELEASE_LAST);
+			}
+			iarg2 = atof(condition->arg2);
+			valid = roxml_double_cmp(iarg1, iarg2, condition->op);
+			ROXML_PUT_BASE_BUFFER(strval);
+		}
+	}
+
+	if ((valid) && (path_end)) {
+		if (roxml_add_to_pool(root, candidat, req_id)) {
+			if (ans) {
+				if ((*nb) >= (*max)) {
+					int new_max = (*max) * 2;
+					node_t **new_ans = roxml_malloc(sizeof(node_t *), new_max, PTR_NODE_RESULT);
+					memcpy(new_ans, (*ans), *(max) * sizeof(node_t *));
+					roxml_release(*ans);
+					*ans = new_ans;
+					*max = new_max;
+				}
+				(*ans)[*nb] = candidat;
+			}
+			(*nb)++;
+		}
+	}
+
+	return valid;
+}
+
+void ROXML_INT roxml_check_node(xpath_node_t *xp, node_t * root, node_t * context, node_t *** ans, int *nb, int *max,
+				int ignore, int req_id)
+{
+	int validate_node = 0;
+
+	if ((req_id == 0) && (*nb > 0)) {
+		return;
+	}
+
+	if (!xp) {
+		return;
+	}
+	// if found a "all document" axes
+	if (ignore == ROXML_DESC_ONLY) {
+		node_t *current = context->chld;
+		while (current) {
+			roxml_check_node(xp, root, current, ans, nb, max, ignore, req_id);
+			current = current->sibl;
+		}
+	}
+
+	switch (xp->axes) {
+	case ROXML_ID_CHILD:{
+			node_t *current = context->chld;
+			while (current) {
+				validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+				if (validate_node) {
+					roxml_check_node(xp->next, root, current, ans, nb, max, ROXML_DIRECT, req_id);
+				}
+				current = current->sibl;
+			}
+			if ((xp->name == NULL) || (strcmp(xp->name, "text()") == 0)
+			    || (strcmp(xp->name, "node()") == 0)) {
+				node_t *current = roxml_get_txt(context, 0);
+				while (current) {
+					validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+					current = current->sibl;
+				}
+			}
+			if ((xp->name == NULL) || (strcmp(xp->name, "node()") == 0)) {
+				node_t *current = context->attr;
+				while (current) {
+					validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+					current = current->sibl;
+				}
+			}
+		}
+		break;
+	case ROXML_ID_DESC:{
+			xp = xp->next;
+			roxml_check_node(xp, root, context, ans, nb, max, ROXML_DESC_ONLY, req_id);
+		}
+		break;
+	case ROXML_ID_DESC_O_SELF:{
+			xp = xp->next;
+			validate_node = roxml_validate_axes(root, context, ans, nb, max, xp, req_id);
+			if (validate_node) {
+				roxml_check_node(xp->next, root, context, ans, nb, max, ROXML_DIRECT, req_id);
+			}
+			roxml_check_node(xp, root, context, ans, nb, max, ROXML_DESC_ONLY, req_id);
+		}
+		break;
+	case ROXML_ID_SELF:{
+			validate_node = roxml_validate_axes(root, context, ans, nb, max, xp, req_id);
+			roxml_check_node(xp->next, root, context, ans, nb, max, ROXML_DIRECT, req_id);
+		}
+		break;
+	case ROXML_ID_PARENT:{
+			if (context->prnt) {
+				validate_node = roxml_validate_axes(root, context->prnt, ans, nb, max, xp, req_id);
+				roxml_check_node(xp->next, root, context->prnt, ans, nb, max, ROXML_DIRECT, req_id);
+			} else {
+				validate_node = 0;
+			}
+		}
+		break;
+	case ROXML_ID_ATTR:{
+			node_t *attribute = context->attr;
+			while (attribute) {
+				validate_node = roxml_validate_axes(root, attribute, ans, nb, max, xp, req_id);
+				if (validate_node) {
+					roxml_check_node(xp->next, root, context, ans, nb, max, ROXML_DIRECT, req_id);
+				}
+				attribute = attribute->sibl;
+			}
+		}
+		break;
+	case ROXML_ID_ANC:{
+			node_t *current = context->prnt;
+			while (current) {
+				validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+				if (validate_node) {
+					roxml_check_node(xp->next, root, current, ans, nb, max, ROXML_DIRECT, req_id);
+				}
+				current = current->prnt;
+			}
+		}
+		break;
+	case ROXML_ID_NEXT_SIBL:{
+			node_t *current = context->sibl;
+			while (current) {
+				validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+				if (validate_node) {
+					roxml_check_node(xp->next, root, current, ans, nb, max, ROXML_DIRECT, req_id);
+				}
+				current = current->sibl;
+			}
+		}
+		break;
+	case ROXML_ID_PREV_SIBL:{
+			node_t *current = context->prnt->chld;
+			while (current != context) {
+				validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+				if (validate_node) {
+					roxml_check_node(xp->next, root, current, ans, nb, max, ROXML_DIRECT, req_id);
+				}
+				current = current->sibl;
+			}
+		}
+		break;
+	case ROXML_ID_NEXT:{
+			node_t *current = context;
+			while (current) {
+				node_t *following = current->sibl;
+				while (following) {
+					validate_node = roxml_validate_axes(root, following, ans, nb, max, xp, req_id);
+					if (validate_node) {
+						roxml_check_node(xp->next, root, following, ans, nb, max, ROXML_DIRECT,
+								 req_id);
+					} else {
+						xp->axes = ROXML_ID_CHILD;
+						roxml_check_node(xp, root, following, ans, nb, max, ROXML_DESC_ONLY,
+								 req_id);
+						xp->axes = ROXML_ID_NEXT;
+					}
+					following = following->sibl;
+				}
+				following = current->prnt->chld;
+				while (following != current) {
+					following = following->sibl;
+				}
+				current = following->sibl;
+			}
+		}
+		break;
+	case ROXML_ID_PREV:{
+			node_t *current = context;
+			while (current && current->prnt) {
+				node_t *preceding = current->prnt->chld;
+				while (preceding != current) {
+					validate_node = roxml_validate_axes(root, preceding, ans, nb, max, xp, req_id);
+					if (validate_node) {
+						roxml_check_node(xp->next, root, preceding, ans, nb, max, ROXML_DIRECT,
+								 req_id);
+					} else {
+						xp->axes = ROXML_ID_CHILD;
+						roxml_check_node(xp, root, preceding, ans, nb, max, ROXML_DESC_ONLY,
+								 req_id);
+						xp->axes = ROXML_ID_PREV;
+					}
+					preceding = preceding->sibl;
+				}
+				current = current->prnt;
+			}
+		}
+		break;
+	case ROXML_ID_NS:{
+			validate_node = roxml_validate_axes(root, context->ns, ans, nb, max, xp, req_id);
+			if (validate_node) {
+				roxml_check_node(xp->next, root, context, ans, nb, max, ROXML_DIRECT, req_id);
+			}
+		}
+		break;
+	case ROXML_ID_ANC_O_SELF:{
+			node_t *current = context;
+			while (current) {
+				validate_node = roxml_validate_axes(root, current, ans, nb, max, xp, req_id);
+				if (validate_node) {
+					roxml_check_node(xp->next, root, current, ans, nb, max, ROXML_DIRECT, req_id);
+				}
+				current = current->prnt;
+			}
+		}
+		break;
+	}
+
+	return;
+}
+
+void roxml_compute_and(node_t *root, node_t **node_set, int *count, int cur_req_id, int prev_req_id)
+{
+	int i = 0;
+	int limit = *count;
+	int pool1 = 0, pool2 = 0;
+
+	for (i = 0; i < limit; i++) {
+		if (pool1 == 0)
+			if (roxml_in_pool(root, node_set[i], cur_req_id))
+				pool1++;
+		if (pool2 == 0)
+			if (roxml_in_pool(root, node_set[i], prev_req_id))
+				pool2++;
+		if (pool1 && pool2)
+			break;
+	}
+
+	if (!pool1 || !pool2) {
+		for (i = 0; i < limit; i++) {
+			roxml_del_from_pool(root, node_set[i], cur_req_id);
+			roxml_del_from_pool(root, node_set[i], prev_req_id);
+		}
+		*count = 0;
+	}
+}
+
+void roxml_compute_or(node_t *root, node_t **node_set, int *count, int req_id, int glob_id)
+{
+	int i = 0;
+	for (i = 0; i < *count; i++) {
+		if (roxml_in_pool(root, node_set[i], req_id)) {
+			roxml_add_to_pool(root, node_set[i], glob_id);
+			roxml_del_from_pool(root, node_set[i], req_id);
+		}
+	}
+}
+
+node_t **roxml_exec_xpath(node_t *root, node_t * n, xpath_node_t * xpath, int index, int *count)
+{
+	int path_id;
+	int max_answers = 1;
+	int glob_id = 0;
+	int *req_ids = NULL;
+
+	node_t **node_set = roxml_malloc(sizeof(node_t *), max_answers, PTR_NODE_RESULT);
+
+	*count = 0;
+	glob_id = roxml_request_id(root);
+	if (glob_id < 0) {
+		roxml_release(node_set);
+		return NULL;
+	}
+	req_ids = calloc(index, sizeof(int));
+
+	// process all and xpath
+	for (path_id = 0; path_id < index; path_id++) {
+		xpath_node_t *cur_xpath = NULL;
+		xpath_node_t *next_xpath = NULL;
+		cur_xpath = &xpath[path_id];
+		if (path_id < index - 1) {
+			next_xpath = &xpath[path_id + 1];
+		}
+
+		if ((cur_xpath->rel == ROXML_OPERATOR_AND) || ((next_xpath) && (next_xpath->rel == ROXML_OPERATOR_AND))) {
+			int req_id = roxml_request_id(root);
+
+			node_t *orig = n;
+			if (cur_xpath->abs) {
+				// context node is root
+				orig = root;
+			}
+			// assign a new request ID
+			roxml_check_node(cur_xpath, root, orig, &node_set, count, &max_answers, ROXML_DIRECT, req_id);
+
+			if (cur_xpath->rel == ROXML_OPERATOR_AND) {
+				roxml_compute_and(root, node_set, count, req_id, req_ids[path_id - 1]);
+			}
+			req_ids[path_id] = req_id;
+		}
+	}
+
+	// process all or xpath
+	for (path_id = 0; path_id < index; path_id++) {
+		node_t *orig = n;
+		xpath_node_t *cur_xpath = &xpath[path_id];
+
+		if (cur_xpath->rel == ROXML_OPERATOR_OR) {
+			if (req_ids[path_id] == 0) {
+				if (cur_xpath->abs) {
+					// context node is root
+					orig = root;
+				}
+				// assign a new request ID
+				roxml_check_node(cur_xpath, root, orig, &node_set, count, &max_answers, ROXML_DIRECT,
+						 glob_id);
+			} else {
+				roxml_compute_or(root, node_set, count, req_ids[path_id + 1], glob_id);
+				roxml_release_id(root, node_set, *count, req_ids[path_id + 1]);
+			}
+		}
+	}
+	roxml_release_id(root, node_set, *count, glob_id);
+
+	for (path_id = 0; path_id < index; path_id++) {
+		if (req_ids[path_id] != 0) {
+			roxml_release_id(root, node_set, *count, req_ids[path_id]);
+		}
+	}
+
+	free(req_ids);
+
+	return node_set;
+}
+#endif /* CONFIG_XML_XPATH_ENGINE */
+
+node_t ROXML_INT *roxml_append_node(node_t *parent, node_t * n)
+{
+	if (parent == NULL) {
+		return n;
+	}
+
+	n->prnt = parent;
+
+	if (parent->ns && ((parent->ns->type & ROXML_INVALID) != ROXML_INVALID)
+	    && parent->ns->priv && ((roxml_ns_t *) parent->ns->priv)->alias[0] == '\0') {
+		if (n->ns == NULL) {
+			n->ns = parent->ns;
+		}
+	}
+
+	if (n->type & ROXML_ATTR_NODE) {
+		if (parent->attr) {
+			node_t *attr = parent->attr;
+			while (attr->sibl) {
+				attr = attr->sibl;
+			}
+			attr->sibl = n;
+		} else {
+			parent->attr = n;
+		}
+	} else {
+		if (parent->next) {
+			parent->next->sibl = n;
+		} else {
+			parent->chld = n;
+		}
+		parent->next = n;
+	}
+
+	return n;
+}
+
+node_t ROXML_INT *roxml_parent_node(node_t *parent, node_t * n, int position)
+{
+	int nb;
+
+	if (n == NULL) {
+		return NULL;
+	}
+	if (parent == NULL) {
+		return n;
+	}
+
+	if (position == 0) {
+		return roxml_append_node(parent, n);
+	}
+
+	if (n->type & ROXML_ATTR_NODE) {
+		nb = roxml_get_attr_nb(parent);
+	} else {
+		nb = roxml_get_nodes_nb(parent,
+					ROXML_PI_NODE | ROXML_CMT_NODE | ROXML_TXT_NODE | ROXML_ELM_NODE |
+					ROXML_DOCTYPE_NODE);
+	}
+
+	if (position > nb) {
+		return roxml_append_node(parent, n);
+	}
+
+	n->prnt = parent;
+
+	if (parent->ns && ((parent->ns->type & ROXML_INVALID) != ROXML_INVALID)
+	    && ((roxml_ns_t *) parent->ns->priv)->alias[0] == '\0') {
+		if (n->ns == NULL) {
+			n->ns = parent->ns;
+		}
+	}
+
+	if (position == 1) {
+		if (n->type & ROXML_ATTR_NODE) {
+			n->sibl = parent->attr;
+			parent->attr = n;
+		} else {
+			n->sibl = parent->chld;
+			parent->chld = n;
+		}
+	} else {
+		int i;
+		node_t *prev = parent->chld;
+		node_t *next = parent->chld;
+
+		if (n->type & ROXML_ATTR_NODE) {
+			next = parent->attr;
+		}
+		for (i = 1; i < position; i++) {
+			prev = next;
+			next = next->sibl;
+		}
+		n->sibl = next;
+		prev->sibl = n;
+	}
+	return n;
+}
+
+#if(CONFIG_XML_COMMIT_XML_TREE==1)
+void ROXML_INT roxml_print_space(FILE * f, char **buf, int *offset, int *len, int lvl)
+{
+	if (lvl > 0) {
+		int i = 0;
+
+		if (buf && *buf) {
+			int pos = *offset + lvl;
+			if (pos >= *len) {
+				*buf = realloc(*buf, *len + ROXML_BASE_LEN);
+				memset(*buf + *len, 0, ROXML_BASE_LEN);
+				*len += ROXML_BASE_LEN;
+			}
+			for (; i < lvl; i++) {
+				strcat(*buf, " ");
+			}
+			*offset = pos;
+		}
+		if (f) {
+			for (; i < lvl; i++) {
+				fwrite(" ", 1, 1, f);
+			}
+		}
+	}
+}
+
+void ROXML_INT roxml_write_string(char **buf, FILE * f, char *str, int *offset, int *len)
+{
+	int min_len = strlen(str);
+	int pos = *offset + min_len;
+	int appended_space = ROXML_BASE_LEN * ((int)(min_len / ROXML_BASE_LEN) + 1);
+
+	if ((pos >= *len) && (buf) && (*buf)) {
+		*buf = realloc(*buf, *len + appended_space);
+		memset(*buf + *len, 0, appended_space);
+		*len += appended_space;
+	}
+	if (f) {
+		fprintf(f, "%s", str);
+	}
+	if (buf && *buf) {
+		strcat(*buf + (*offset), str);
+	}
+	*offset = pos;
+}
+
+void ROXML_INT roxml_write_node(node_t *n, FILE * f, char **buf, int human, int lvl, int *offset, int *len)
+{
+	ROXML_GET_BASE_BUFFER(name);
+
+	roxml_get_name(n, name, ROXML_BASE_LEN);
+	if (human) {
+		roxml_print_space(f, buf, offset, len, lvl);
+	}
+	if ((n->type & ROXML_NODE_TYPES) == ROXML_ELM_NODE) {
+		ROXML_GET_BASE_BUFFER(ns);
+		node_t *attr = n->attr;
+		if (n->prnt) {
+			roxml_write_string(buf, f, "<", offset, len);
+			if (n->ns) {
+				roxml_get_name(n->ns, ns, ROXML_BASE_LEN);
+				if (ns[0] != '\0') {
+					roxml_write_string(buf, f, ns, offset, len);
+					roxml_write_string(buf, f, ":", offset, len);
+				}
+			}
+			roxml_write_string(buf, f, name, offset, len);
+		}
+		while (attr) {
+			int status = 0;
+			char *value;
+			char arg[ROXML_BASE_LEN];
+			char val[ROXML_BASE_LEN];
+
+			roxml_get_name(attr, arg, ROXML_BASE_LEN);
+			value = roxml_get_content(attr, val, ROXML_BASE_LEN, &status);
+			if (status >= ROXML_BASE_LEN) {
+				value = roxml_get_content(attr, NULL, 0, &status);
+			}
+			roxml_write_string(buf, f, " ", offset, len);
+			if (attr->type & ROXML_NS_NODE) {
+				roxml_write_string(buf, f, "xmlns", offset, len);
+				if (arg[0] != '\0') {
+					roxml_write_string(buf, f, ":", offset, len);
+				}
+			}
+			if (attr->ns) {
+				ROXML_GET_BASE_BUFFER(arg_ns);
+				roxml_get_name(attr->ns, arg_ns, ROXML_BASE_LEN);
+				if (arg_ns[0] != '\0') {
+					roxml_write_string(buf, f, arg_ns, offset, len);
+					roxml_write_string(buf, f, ":", offset, len);
+				}
+				ROXML_PUT_BASE_BUFFER(arg_ns);
+			}
+			roxml_write_string(buf, f, arg, offset, len);
+			roxml_write_string(buf, f, "=\"", offset, len);
+			roxml_write_string(buf, f, value, offset, len);
+			roxml_write_string(buf, f, "\"", offset, len);
+			attr = attr->sibl;
+			roxml_release(value);
+		}
+		if (n->chld) {
+			node_t *chld = n->chld;
+			if (n->prnt) {
+				roxml_write_string(buf, f, ">", offset, len);
+				if (human) {
+					roxml_write_string(buf, f, "\n", offset, len);
+				}
+			}
+			while (chld) {
+				if (chld->type & ROXML_TXT_NODE) {
+					ROXML_GET_BASE_BUFFER(val);
+					char *value;
+					int status;
+					if (human) {
+						roxml_print_space(f, buf, offset, len, lvl + 1);
+					}
+					value = roxml_get_content(chld, val, ROXML_BASE_LEN, &status);
+					if (status >= ROXML_BASE_LEN) {
+						value = roxml_get_content(chld, NULL, 0, &status);
+					}
+					if ((chld->type & ROXML_CDATA_NODE) == ROXML_CDATA_NODE) {
+						roxml_write_string(buf, f, "<![CDATA[", offset, len);
+						roxml_write_string(buf, f, value, offset, len);
+						roxml_write_string(buf, f, "]]>", offset, len);
+					} else {
+						char *end = value + status - 2;
+						char *strip = value;
+						while (roxml_is_separator(end[0])) {
+							end[0] = '\0';
+							end--;
+						}
+						while (roxml_is_separator(strip[0])) {
+							strip++;
+						}
+
+						roxml_write_string(buf, f, strip, offset, len);
+					}
+					if (human) {
+						roxml_write_string(buf, f, "\n", offset, len);
+					}
+					chld = chld->sibl;
+					roxml_release(value);
+					ROXML_PUT_BASE_BUFFER(val);
+				} else {
+					roxml_write_node(chld, f, buf, human, lvl + 1, offset, len);
+					chld = chld->sibl;
+				}
+			}
+			if (n->prnt) {
+				if (human) {
+					roxml_print_space(f, buf, offset, len, lvl);
+				}
+				roxml_write_string(buf, f, "</", offset, len);
+				if (n->ns) {
+					if (ns[0] != '\0') {
+						roxml_write_string(buf, f, ns, offset, len);
+						roxml_write_string(buf, f, ":", offset, len);
+					}
+				}
+				roxml_write_string(buf, f, name, offset, len);
+				roxml_write_string(buf, f, ">", offset, len);
+				if (human) {
+					roxml_write_string(buf, f, "\n", offset, len);
+				}
+			}
+		} else {
+			roxml_write_string(buf, f, "/>", offset, len);
+			if (human) {
+				roxml_write_string(buf, f, "\n", offset, len);
+			}
+		}
+		ROXML_PUT_BASE_BUFFER(ns);
+	} else {
+		char *value;
+		int status;
+		char head[8];
+		char tail[8];
+
+		ROXML_GET_BASE_BUFFER(val);
+
+		if ((n->type & ROXML_NODE_TYPES) == ROXML_CMT_NODE) {
+			strcpy(head, "<!--");
+			strcpy(tail, "-->");
+		} else if ((n->type & ROXML_NODE_TYPES) == ROXML_DOCTYPE_NODE) {
+			strcpy(head, "<");
+			strcpy(tail, ">");
+		} else if ((n->type & ROXML_NODE_TYPES) == ROXML_PI_NODE) {
+			strcpy(head, "<?");
+			strcpy(tail, "?>");
+		} else {
+			head[0] = '\0';
+			tail[0] = '\0';
+		}
+
+		roxml_write_string(buf, f, head, offset, len);
+
+		if (name[0]) {
+			roxml_write_string(buf, f, name, offset, len);
+		}
+
+		value = roxml_get_content(n, val, ROXML_BASE_LEN, &status);
+		if (status >= ROXML_BASE_LEN) {
+			value = roxml_get_content(n, NULL, 0, &status);
+		}
+		if (name[0] && value && value[0]) {
+			roxml_write_string(buf, f, " ", offset, len);
+		}
+		roxml_write_string(buf, f, value, offset, len);
+		roxml_release(value);
+
+		roxml_write_string(buf, f, tail, offset, len);
+
+		if (human) {
+			roxml_write_string(buf, f, "\n", offset, len);
+		}
+		ROXML_PUT_BASE_BUFFER(val);
+	}
+	ROXML_PUT_BASE_BUFFER(name);
+}
+#endif /* CONFIG_XML_COMMIT_XML_TREE */
+
+#if(CONFIG_XML_READ_WRITE==1)
+void ROXML_INT roxml_reset_ns(node_t *n, node_t * ns)
+{
+	node_t *attr = NULL;
+	node_t *chld = NULL;
+
+	if (!n) {
+		return;
+	}
+
+	if (n->ns == ns) {
+		if (n->prnt) {
+			n->ns = n->prnt->ns;
+		} else {
+			n->ns = NULL;
+		}
+	}
+
+	chld = n->chld;
+	while (chld) {
+		roxml_reset_ns(chld, ns);
+		chld = chld->sibl;
+	}
+
+	attr = n->attr;
+	while (attr) {
+		if ((attr->type & ROXML_NS_NODE) == 0) {
+			if (attr->ns == ns) {
+				attr->ns = attr->prnt->ns;
+			}
+		}
+		attr = attr->sibl;
+	}
+}
+
+void ROXML_INT roxml_del_arg_node(node_t *n)
+{
+	node_t *current = n->prnt->attr;
+
+	if (n->type & ROXML_NS_NODE) {
+		roxml_reset_ns(n->prnt, n);
+	}
+
+	if (current == n) {
+		n->prnt->attr = n->sibl;
+	} else if (current) {
+		while (current->sibl && current->sibl != n) {
+			current = current->sibl;
+		}
+		current->sibl = n->sibl;
+	}
+	roxml_del_tree(n->chld);
+	return;
+}
+#endif /* CONFIG_XML_READ_WRITE */
+
+/* do not call this function if n->prnt == NULL */
+static node_t *roxml_get_real_prev_sibling(node_t *n)
+{
+	node_t *current = n->prnt->chld;
+	node_t *prev = NULL;
+
+	while (current != n) {
+		prev = current;
+		current = current->sibl;
+	}
+
+	return prev;
+}
+
+void ROXML_INT roxml_del_txt_node(node_t *n)
+{
+	node_t *current = n->prnt->chld;
+	while (current && (current->type & ROXML_TXT_NODE) == 0) {
+		current = current->sibl;
+	}
+	if (n->prnt && n->prnt->next == n) {
+		n->prnt->next = roxml_get_real_prev_sibling(n);
+	}
+	if (current == n) {
+		n->prnt->chld = n->sibl;
+	} else if (current) {
+		while (current->sibl && current->sibl != n) {
+			current = current->sibl;
+		}
+		current->sibl = n->sibl;
+	}
+
+}
+
+void ROXML_INT roxml_del_std_node(node_t *n)
+{
+	node_t *current = n->prnt->chld;
+	if (n->prnt && n->prnt->next == n) {
+		n->prnt->next = roxml_get_real_prev_sibling(n);
+	}
+	if (current == n) {
+		n->prnt->chld = n->sibl;
+	} else if (current) {
+		while (current->sibl && current->sibl != n) {
+			current = current->sibl;
+		}
+		current->sibl = n->sibl;
+	}
+	roxml_del_tree(n->chld);
+	roxml_del_tree(n->attr);
+}
+
diff --git a/Libs/libroxml-2.3.0/src/roxml-internal.h b/Libs/libroxml-2.3.0/src/roxml-internal.h
new file mode 100644
index 0000000000000000000000000000000000000000..69e1280b97925df9b246e2b9eccb70ae01e631e5
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-internal.h
@@ -0,0 +1,505 @@
+/** \file roxml-internal.h
+ *  \brief internal header for libroxml.so
+ *
+ * This is the header file used by roxml.c
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 23 Dec 2008
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef ROXML_INT_H
+#define ROXML_INT_H
+
+/**
+ * \def ROXML_INT
+ *
+ * internal function: not part of the API
+ */
+#define ROXML_INT
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <string.h>
+
+#include "roxml-tune.h"
+#include "roxml-types.h"
+#include "roxml-defines.h"
+#include "roxml.h"
+
+/** \brief internal function
+ *
+ * \fn void ROXML_INT roxml_reset_ns(node_t *n, node_t *ns);
+ * This function remove the namespace of a node if it is the one
+ * specified as argument, and replace it with its parent one
+ * \param n is one node of the tree
+ * \param ns is one nsdef of the tree
+ * \return void
+ */
+void ROXML_INT roxml_reset_ns(node_t *n, node_t * ns);
+
+/** \brief internal function
+ *
+ * \fn void ROXML_INT roxml_free_node(node_t *n);
+ * This function delete a node without handling its tree
+ * \param n is one node of the tree
+ * \return void
+ */
+void ROXML_INT roxml_free_node(node_t *n);
+
+/** \brief internal function
+ *
+ * \fn node_t* ROXML_INT roxml_create_node(int pos, void * src, int type);
+ * This function allocate a new node
+ * \param pos is the beginning offset of the node in the file
+ * \param src is the pointer to the buffer or file
+ * \param type is the type of node between arg and val
+ * \return the new node
+ */
+node_t ROXML_INT *roxml_create_node(int pos, void *src, int type);
+
+/** \brief internal function
+ *
+ * \fn void ROXML_INT roxml_del_tree(node_t *n);
+ * This function delete a tree recursively
+ * \param n is one node of the tree
+ * \return void
+ * see roxml_close
+ */
+void ROXML_INT roxml_del_tree(node_t *n);
+
+/** \brief internal function
+ *
+ * \fn void ROXML_INT roxml_close_node(node_t *n, node_t *close);
+ * This function close the node (add the end offset) and parent the node
+ * \param n is the node to close
+ * \param close is the node that close node n
+ * \return void
+ */
+void ROXML_INT roxml_close_node(node_t *n, node_t * close);
+
+/** \brief generic load function
+ *
+ * \fn node_t* ROXML_API roxml_load(node_t *current_node, FILE *file, char *buffer);
+ * This function load a document and all the corresponding nodes
+ * file and buffer params are exclusive. You usualy want to load
+ * either a file OR a buffer
+ * \param current_node the XML root
+ * \param file file descriptor of document
+ * \param buffer address of buffer that contains xml
+ * \return the root node or NULL
+ * see roxml_close
+ */
+node_t ROXML_INT *roxml_load(node_t *current_node, FILE * file, char *buffer);
+
+/** \brief node append function
+ *
+ * \fn roxml_append_node(node_t *parent, node_t *n);
+ * this function add a given node as the last child of another node
+ * \param parent the parent node
+ * \param n the node to parent
+ * \return
+ */
+node_t ROXML_INT *roxml_append_node(node_t *parent, node_t * n);
+
+/** \brief node relocate function
+ *
+ * \fn roxml_parent_node(node_t *parent, node_t *n, int position);
+ * this function change the position of a node in its parent list
+ * \param parent the parent node
+ * \param n the node to parent
+ * \param position the position, 0 means or > nb children means at the end
+ * \return
+ */
+node_t ROXML_INT *roxml_parent_node(node_t *parent, node_t * n, int position);
+
+/** \brief alloc memory function
+ *
+ * \fn roxml_malloc(int size, int num, int type)
+ * this function allocate some memory that will be reachable at
+ * any time by libroxml memory manager
+ * \param size the size of memory to allocate for each elem
+ * \param num the number of element
+ * \param type the kind of pointer
+ */
+void ROXML_INT *roxml_malloc(int size, int num, int type);
+
+/** \brief read xml doc function
+ *
+ * \fn roxml_read(int pos, int size, char * buffer, node_t *node)
+ * this function read inside a xml doc (file or buffer) and fill the given buffer
+ * \param pos the pos in the xml document
+ * \param size the size of the data to read
+ * \param buffer the destination buffer
+ * \param node the node that belong to the tree we want to read to
+ * \return the number of bytes read
+ */
+int ROXML_INT roxml_read(int pos, int size, char *buffer, node_t *node);
+
+/** \brief axes setter function
+ *
+ * \fn roxml_set_axes(xpath_node_t *node, char *axes, int *offset);
+ * this function set the axe to a xpath node from xpath string
+ * \param node the xpath node to fill
+ * \param axes the string where axe is extracted from
+ * \param offset the detected offset in axe string
+ * \return the filled xpath_node
+ */
+xpath_node_t ROXML_INT *roxml_set_axes(xpath_node_t *node, char *axes, int *offset);
+
+/** \brief xpath parsing function
+ *
+ * \fn roxml_parse_xpath(char *path, xpath_node_t **xpath, int context);
+ * this function convert an xpath string to a table of list of xpath_node_t
+ * \param path the xpath string
+ * \param xpath the parsed xpath
+ * \param context 0 for a real xpath, 1 for a xpath in predicat
+ * \return the number of xpath list in the table
+ */
+int ROXML_INT roxml_parse_xpath(char *path, xpath_node_t **xpath, int context);
+
+/** \brief xpath condition free function
+ *
+ * \fn roxml_free_xcond(xpath_cond_t *xcond);
+ * this function frees an xpath_cond_t cell
+ * \param xcond the xcond to free
+ * \return
+ */
+void ROXML_INT roxml_free_xcond(xpath_cond_t * xcond);
+
+/** \brief xpath free function
+ *
+ * \fn roxml_free_xpath(xpath_node_t *xpath, int nb);
+ * this function frees the parsed xpath structure
+ * \param xpath the xpath to free
+ * \param nb the number of xpath structures in the table
+ * \return
+ */
+void ROXML_INT roxml_free_xpath(xpath_node_t *xpath, int nb);
+
+/** \brief  double comparison function
+ *
+ * \fn roxml_double_cmp(double a, double b, int op);
+ * this function  compare two doubles using one defined operator
+ * \param a first operand
+ * \param b second operand
+ * \param op the operator to use
+ * \return 1 if comparison is ok, esle 0
+ */
+int ROXML_INT roxml_double_cmp(double a, double b, int op);
+
+/** \brief double operation function
+ *
+ * \fn roxml_double_oper(double a, double b, int op);
+ * this function  compare two doubles using one defined operator
+ * \param a first operand
+ * \param b second operand
+ * \param op the operator to use
+ * \return 1 if comparison is ok, esle 0
+ */
+double ROXML_INT roxml_double_oper(double a, double b, int op);
+
+/** \brief  string comparison function
+ *
+ * \fn roxml_string_cmp(char *sa, char *sb, int op);
+ * this function compare two strings using one defined operator
+ * \param sa first operand
+ * \param sb second operand
+ * \param op the operator to use
+ * \return 1 if comparison is ok, else 0
+ */
+int ROXML_INT roxml_string_cmp(char *sa, char *sb, int op);
+
+/** \brief predicat validation function
+ *
+ * \fn roxml_validate_predicat(xpath_node_t *xn, node_t *candidat);
+ * this function check for predicat validity. predicat is part between brackets
+ * \param xn the xpath node containing the predicat to test
+ * \param candidat the node to test
+ * \return 1 if predicat is validated, else 0
+ */
+int ROXML_INT roxml_validate_predicat(xpath_node_t *xn, node_t * candidat);
+
+/** \brief id reservation function
+ *
+ * \fn roxml_request_id(node_t *root);
+ * this function request an available id for a new xpath search on the tree
+ * \param root the root of the tree where id table is stored
+ * \return the id between 1 - 255 or -1 if failed
+ */
+int ROXML_INT roxml_request_id(node_t *root);
+
+/** \brief release id function
+ *
+ * \fn roxml_release_id(node_t *root, node_t **pool, int pool_len, int req_id);
+ * this function release a previously required id and remove all id token from the pool
+ * \param root the root of the tree that was used for id request
+ * \param pool the result from xpath search using this id
+ * \param pool_len the number of node in pool
+ * \param req_id the id to release
+ * \return
+ */
+void ROXML_INT roxml_release_id(node_t *root, node_t **pool, int pool_len, int req_id);
+
+/** \brief add a token top node function
+ *
+ * \fn roxml_add_to_pool(node_t *root, node_t *n, int req_id);
+ * this function add a token to target node. This token is used to garanty
+ * unicity in xpath results
+ * \param root the root node
+ * \param n the node to mark
+ * \param req_id the id to use
+ * \return 0 if already in the pool, else 1
+ */
+int ROXML_INT roxml_add_to_pool(node_t *root, node_t * n, int req_id);
+
+/** \brief axe validation function
+ *
+ * \fn roxml_validate_axes(node_t *root, node_t *candidat, node_t ***ans, int *nb, int *max, xpath_node_t *xn, int req_id);
+ * this function validate if an axe is matching the current node
+ * \param root the root node
+ * \param candidat the node to test
+ * \param ans the pointer to answers pool
+ * \param nb the number of answers in pool
+ * \param max the current size of the pool
+ * \param xn the xpath node to test
+ * \param req_id the pool id
+ * \return 1 if axe is validated, else 0
+ */
+int ROXML_INT roxml_validate_axes(node_t *root, node_t * candidat, node_t *** ans, int *nb, int *max,
+				  xpath_node_t *xn, int req_id);
+
+/** \brief real xpath validation function
+ *
+ * \fn roxml_check_node(xpath_node_t *xp, node_t *root, node_t *context, node_t ***ans, int *nb, int *max, int ignore, int req_id);
+ * this function perform the xpath test on a tree
+ * \param xp the xpath nodes to test
+ * \param root the root node
+ * \param context the current context node
+ * \param ans the pointer to answers pool
+ * \param nb the number of answers in pool
+ * \param max the current size of the pool
+ * \param ignore a flag for some axes that are going thru all document
+ * \param req_id the pool id
+ * \return
+ */
+void ROXML_INT roxml_check_node(xpath_node_t *xp, node_t * root, node_t * context, node_t *** ans, int *nb, int *max,
+				int ignore, int req_id);
+
+/** \brief space printing function
+ *
+ * \fn roxml_print_space(FILE *f, char ** buf, int * offset, int * len, int lvl);
+ * this function add some space to output when committing change in human format
+ * \param f the file pointer if any
+ * \param buf the pointer to string if any
+ * \param offset the current offset in stream
+ * \param len the total len of buffer if any
+ * \param lvl the level in the tree
+ * \return
+ */
+void ROXML_INT roxml_print_space(FILE * f, char **buf, int *offset, int *len, int lvl);
+
+/** \brief string writter function
+ *
+ * \fn roxml_write_string(char ** buf, FILE * f, char * str, int *offset, int * len);
+ * this function write a string to output when committing change
+ * \param f the file pointer if any
+ * \param buf the pointer to string if any
+ * \param str the string to write
+ * \param offset the current offset in stream
+ * \param len the total len of buffer if any
+ * \return
+ */
+void ROXML_INT roxml_write_string(char **buf, FILE * f, char *str, int *offset, int *len);
+
+/** \brief tree write function
+ *
+ * \fn roxml_write_node(node_t *n, FILE *f, char ** buf, int human, int lvl, int *offset, int *len);
+ * this function write each node of the tree to output
+ * \param n the node to write
+ * \param f the file pointer if any
+ * \param buf the pointer to the buffer string if any
+ * \param human 1 to use the human format else 0
+ * \param lvl the current level in tree
+ * \param offset the current offset in stream
+ * \param len the total len of buffer if any
+ * \return
+ */
+void ROXML_INT roxml_write_node(node_t *n, FILE * f, char **buf, int human, int lvl, int *offset, int *len);
+
+/** \brief attribute node deletion function
+ *
+ * \fn roxml_del_arg_node(node_t *n);
+ * this function delete an attribute node
+ * \param n the node to delete
+ * \return
+ */
+void ROXML_INT roxml_del_arg_node(node_t *n);
+
+/** \brief text node deletion function
+ *
+ * \fn roxml_del_txt_node(node_t *n);
+ * this function delete a text node
+ * \param n the node to delete
+ * \return
+ */
+void ROXML_INT roxml_del_txt_node(node_t *n);
+
+/** \brief node deletion function
+ *
+ * \fn roxml_del_std_node(node_t *n);
+ * this function delete a standard node
+ * \param n the node to delete
+ * \return
+ */
+void ROXML_INT roxml_del_std_node(node_t *n);
+
+/** \brief node type setter function
+ *
+ * \fn roxml_set_type(node_t *n, int type);
+ * this function change the type of a node
+ * \param n the node to modify
+ * \param type the new type to set
+ * \return
+ */
+void ROXML_INT roxml_set_type(node_t *n, int type);
+
+/** \brief node absolute position get
+ *
+ * \fn roxml_get_node_internal_position(node_t *n);
+ * this function returns the absolute position of the node between siblings
+ * \param n the node
+ * \return the absolute position starting at 1
+ */
+int ROXML_INT roxml_get_node_internal_position(node_t *n);
+
+/** \brief node set and function
+ *
+ * \fn roxml_compute_and(node_t *root, node_t **node_set, int *count, int cur_req_id, int prev_req_id);
+ * this function computes the AND of two node pools. The resulting pool will have the same ID as cur_req_id.
+ * \param root the root of the tree
+ * \param node_set the node set containing the 2 pools
+ * \param count number of node in the node set
+ * \param cur_req_id the id of the first group
+ * \param prev_req_id the id of the second group
+ */
+void ROXML_INT roxml_compute_and(node_t *root, node_t **node_set, int *count, int cur_req_id, int prev_req_id);
+
+/** \brief node set or function
+ *
+ * \fn roxml_compute_or(node_t *root, node_t **node_set, int *count, int req_id, int glob_id);
+ * this function computes the OR of two node pools. The resulting pool will have the same ID as glob_id.
+ * \param root the root of the tree
+ * \param node_set the node set containing the 2 pools
+ * \param count number of node in the node set
+ * \param req_id the id of the first group
+ * \param glob_id the id of the second group
+ * \return
+ */
+void ROXML_INT roxml_compute_or(node_t *root, node_t **node_set, int *count, int req_id, int glob_id);
+
+/** \brief pool node delete function
+ *
+ * \fn roxml_del_from_pool(node_t *root, node_t *n, int req_id);
+ * this function remove one node from a pool
+ * \param root the root of the tree
+ * \param n the node to remove
+ * \param req_id the pool id
+ * \return
+ */
+void ROXML_INT roxml_del_from_pool(node_t *root, node_t * n, int req_id);
+
+/** \brief node pool presence tester function
+ *
+ * \fn roxml_in_pool(node_t *root, node_t *n, int req_id);
+ * this function test is a node is in a pool
+ * \param root the root of the tree
+ * \param n the node to test
+ * \param req_id the pool id
+ * \return
+ */
+int ROXML_INT roxml_in_pool(node_t *root, node_t * n, int req_id);
+
+/** \brief real xpath execution
+ *
+ * \fn roxml_exec_xpath(node_t *root, node_t *n, xpath_node_t *xpath, int index, int * count);
+ * this function exec a decoded xpath strcuture
+ * \param root the root of the tree
+ * \param n the context node
+ * \param xpath the xpath structure
+ * \param index the number of xpath condition in string
+ * \param count the pointer to a variable that is filled with the resulting node number
+ * \return  the resulting node set that have to be freed with roxml_release
+ */
+node_t ROXML_INT **roxml_exec_xpath(node_t *root, node_t *n, xpath_node_t *xpath, int index, int *count);
+
+/** \brief separator tester
+ *
+ * \fn roxml_is_separator(char sep);
+ * This function tells if a char is a string separator
+ * \param sep char to test
+ * \return 1 if the char was a separator else 0
+ */
+int ROXML_INT roxml_is_separator(char sep);
+
+/** \brief number tester
+ *
+ * \fn int roxml_is_number(char *input);
+ * This function tells if a string is a number
+ * \param input string to test
+ * \return 1 if the string was a number else 0
+ */
+int roxml_is_number(char *input);
+
+/** \brief node creation during parsing
+ *
+ * \fn roxml_process_begin_node(roxml_load_ctx_t *context, int position);
+ * this function create a new node upon finding new opening sign. It closes previous node if necessary
+ * \param context the parsing context
+ * \param position the position in the file
+ * \return
+ */
+void ROXML_INT roxml_process_begin_node(roxml_load_ctx_t * context, int position);
+
+/** \brief namespace without alias name creation during parsing
+ *
+ * \fn roxml_process_unaliased_ns(roxml_load_ctx_t *context);
+ * this function create a new namespace without alias (default ns or remove ns)
+ * \param context the parsing context
+ * \return
+ */
+void ROXML_INT roxml_process_unaliased_ns(roxml_load_ctx_t * context);
+
+/** \brief name space lookup in list
+ *
+ * \fn roxml_lookup_nsdef(node_t *nsdef, char * ns);
+ * this function look for requested name space in nsdef list
+ * \param nsdef the nsdef list
+ * \param ns the namespace to find
+ * \return the nsdef node or NULL
+ */
+node_t ROXML_INT *roxml_lookup_nsdef(node_t *nsdef, char *ns);
+
+#ifdef __DEBUG
+extern unsigned int _nb_node;
+extern unsigned int _nb_attr;
+extern unsigned int _nb_text;
+#endif
+
+extern memory_cell_t head_cell;
+
+#endif /* ROXML_INT_H */
diff --git a/Libs/libroxml-2.3.0/src/roxml-parse-engine.c b/Libs/libroxml-2.3.0/src/roxml-parse-engine.c
new file mode 100644
index 0000000000000000000000000000000000000000..29faa200441970572ade60e8031ba1aae8c6fc21
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-parse-engine.c
@@ -0,0 +1,1181 @@
+/** \file roxml-parse-engine.c
+ *  \brief source for libroxml.so
+ *
+ * This is the source file for lib libroxml.so internal functions
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 20 Fev 2010
+ *
+ * Copyright (C) 2010 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "roxml-internal.h"
+
+/* #define DEBUG_PARSING */
+
+roxml_parser_item_t *roxml_append_parser_item(roxml_parser_item_t * head, char *key, roxml_parse_func func)
+{
+	roxml_parser_item_t *item = head;
+
+	if (head == NULL) {
+		item = (roxml_parser_item_t *) calloc(1, sizeof(roxml_parser_item_t));
+		head = item;
+	} else {
+		item = head;
+		while (item->next)
+			item = item->next;
+		item->next = (roxml_parser_item_t *) calloc(1, sizeof(roxml_parser_item_t));
+		item = item->next;
+	}
+	item->chunk = key ? key[0] : 0;
+	item->func = func;
+
+	return head;
+}
+
+void roxml_parser_free(roxml_parser_item_t * head)
+{
+	free(head);
+}
+
+void roxml_parser_clear(roxml_parser_item_t * head)
+{
+	roxml_parser_item_t *item = head;
+
+	while (item) {
+		roxml_parser_item_t *to_delete = item;
+		item = item->next;
+		free(to_delete);
+	}
+
+	return;
+}
+
+roxml_parser_item_t *roxml_parser_prepare(roxml_parser_item_t * head)
+{
+	roxml_parser_item_t *item = head;
+	roxml_parser_item_t *table = NULL;
+	int count = 0;
+
+	head->count = 0;
+	head->def_count = 0;
+	while (item) {
+		if (item->chunk != 0) {
+			head->count++;
+		}
+		head->def_count++;
+		item = item->next;
+	}
+
+	table = (roxml_parser_item_t *) malloc(sizeof(roxml_parser_item_t) * (head->def_count));
+
+	item = head;
+
+	while (item) {
+		memcpy(&table[count], item, sizeof(roxml_parser_item_t));
+		item = item->next;
+		count++;
+	}
+	roxml_parser_clear(head);
+
+	return table;
+}
+
+int roxml_parse_line(roxml_parser_item_t * head, char *line, int len, void *ctx)
+{
+	int count = head->count;
+	int def_count = head->def_count;
+	char *line_end = line;
+	char *chunk = line;
+
+	if (len > 0) {
+		line_end = line + len;
+	} else {
+		line_end = line + strlen(line);
+	}
+
+	while (chunk < line_end) {
+		int i = 0;
+		for (; i < count; i++) {
+			if (chunk[0] == head[i].chunk) {
+				int ret = head[i].func(chunk, ctx);
+				if (ret > 0) {
+					chunk += ret;
+					break;
+				} else if (ret < 0) {
+					return -1;
+				}
+			}
+		}
+		for (; i >= count && i < def_count; i++) {
+			int ret = head[i].func(chunk, ctx);
+			if (ret > 0) {
+				chunk += ret;
+				break;
+			} else if (ret < 0) {
+				return -1;
+			}
+		}
+	}
+
+	return (chunk - line);
+}
+
+#if(CONFIG_XML_XPATH_ENGINE==1) 
+int _func_xpath_ignore(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return 1;
+}
+
+int _func_xpath_new_node(char *chunk, void *data)
+{
+	int cur = 0;
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	if (!ctx->quoted && !ctx->dquoted && !ctx->parenthesys && !ctx->bracket) {
+		int offset = 0;
+		xpath_node_t *tmp_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+		if ((chunk[cur] == '/') && (ctx->is_first_node)) {
+			free(tmp_node);
+			ctx->new_node = ctx->first_node;
+			ctx->first_node->abs = 1;
+		} else if ((chunk[cur] == '/') && (ctx->wait_first_node)) {
+			free(tmp_node);
+			ctx->first_node->abs = 1;
+		} else if ((ctx->is_first_node) || (ctx->wait_first_node)) {
+			free(tmp_node);
+		} else {
+			if (ctx->new_node) {
+				ctx->new_node->next = tmp_node;
+			}
+			ctx->new_node = tmp_node;
+		}
+		ctx->is_first_node = 0;
+		ctx->wait_first_node = 0;
+		ctx->new_node = roxml_set_axes(ctx->new_node, chunk + cur, &offset);
+		cur = offset + 1;
+	}
+	ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_quote(char *chunk, void *data)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	if (!ctx->dquoted) {
+		if (ctx->quoted && ctx->content_quoted == MODE_COMMENT_QUOTE) {
+			ctx->content_quoted = MODE_COMMENT_NONE;
+			chunk[0] = '\0';
+		}
+		ctx->quoted = (ctx->quoted + 1) % 2;
+	}
+	ctx->shorten_cond = 0;
+	return 1;
+}
+
+int _func_xpath_dquote(char *chunk, void *data)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	if (!ctx->quoted) {
+		if (ctx->dquoted && ctx->content_quoted == MODE_COMMENT_DQUOTE) {
+			ctx->content_quoted = MODE_COMMENT_NONE;
+			chunk[0] = '\0';
+		}
+		ctx->dquoted = (ctx->dquoted + 1) % 2;
+	}
+	ctx->shorten_cond = 0;
+	return 1;
+}
+
+int _func_xpath_open_parenthesys(char *chunk, void *data)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	if (!ctx->quoted && !ctx->dquoted) {
+		ctx->parenthesys = (ctx->parenthesys + 1) % 2;
+	}
+	ctx->shorten_cond = 0;
+	return 1;
+}
+
+int _func_xpath_close_parenthesys(char *chunk, void *data)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	if (!ctx->quoted && !ctx->dquoted) {
+		ctx->parenthesys = (ctx->parenthesys + 1) % 2;
+	}
+	ctx->shorten_cond = 0;
+	return 1;
+}
+
+int _func_xpath_open_brackets(char *chunk, void *data)
+{
+	xpath_cond_t *tmp_cond;
+	int cur = 0;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	if (!ctx->quoted && !ctx->dquoted) {
+		ctx->bracket = (ctx->bracket + 1) % 2;
+		chunk[0] = '\0';
+
+		ctx->shorten_cond = 1;
+		tmp_cond = (xpath_cond_t *) calloc(1, sizeof(xpath_cond_t));
+		ctx->new_node->cond = tmp_cond;
+		ctx->new_cond = tmp_cond;
+		ctx->new_cond->arg1 = chunk + cur + 1;
+	} else {
+		ctx->shorten_cond = 0;
+	}
+	cur++;
+	return 1;
+}
+
+int _func_xpath_close_brackets(char *chunk, void *data)
+{
+	int cur = 0;
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	if (!ctx->quoted && !ctx->dquoted) {
+		ctx->bracket = (ctx->bracket + 1) % 2;
+		chunk[0] = '\0';
+
+		if (ctx->new_cond) {
+			if (ctx->new_cond->func == ROXML_FUNC_XPATH) {
+				xpath_node_t *xp;
+				ctx->new_cond->func2 = roxml_parse_xpath(ctx->new_cond->arg1, &xp, 1);
+				ctx->new_cond->xp = xp;
+			}
+		} else {
+			return -1;
+		}
+	}
+	cur++;
+	ctx->shorten_cond = 0;
+	return 1;
+}
+
+int _func_xpath_condition_or(char *chunk, void *data)
+{
+	xpath_node_t *tmp_node;
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	int len = 0;
+	xpath_cond_t *tmp_cond;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+
+	len = strlen(ROXML_COND_OR);
+
+	if (strncmp(chunk, ROXML_COND_OR, len) == 0) {
+		if (roxml_is_separator(*(chunk - 1)) && roxml_is_separator(*(chunk + len))) {
+			if (!ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+				if (ctx->context != 1) {
+					return 0;
+				}
+				chunk[-1] = '\0';
+				cur += strlen(ROXML_COND_OR);
+				tmp_node = (xpath_node_t *) calloc(ctx->nbpath + 1, sizeof(xpath_node_t));
+				memcpy(tmp_node, ctx->first_node, ctx->nbpath * sizeof(xpath_node_t));
+				free(ctx->first_node);
+				ctx->first_node = tmp_node;
+				ctx->wait_first_node = 1;
+				ctx->new_node = tmp_node + ctx->nbpath;
+				ctx->new_node->rel = ROXML_OPERATOR_OR;
+				ctx->nbpath++;
+			} else if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+				if (ctx->new_cond->func != ROXML_FUNC_XPATH) {
+					chunk[-1] = '\0';
+					cur += strlen(ROXML_COND_OR);
+					tmp_cond = (xpath_cond_t *) calloc(1, sizeof(xpath_cond_t));
+					if (ctx->new_cond) {
+						ctx->new_cond->next = tmp_cond;
+					}
+					ctx->new_cond = tmp_cond;
+					ctx->new_cond->rel = ROXML_OPERATOR_OR;
+					ctx->new_cond->arg1 = chunk + cur + 1;
+				}
+			}
+		}
+	}
+	if (cur)
+		ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_condition_and(char *chunk, void *data)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	int len = 0;
+	xpath_node_t *tmp_node;
+	xpath_cond_t *tmp_cond;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+
+	len = strlen(ROXML_COND_AND);
+
+	if (strncmp(chunk, ROXML_COND_AND, len) == 0) {
+		if (roxml_is_separator(*(chunk - 1)) && roxml_is_separator(*(chunk + len))) {
+			if (!ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+				if (ctx->context != 1) {
+					return 0;
+				}
+				chunk[-1] = '\0';
+				cur += strlen(ROXML_COND_AND);
+				tmp_node = (xpath_node_t *) calloc(ctx->nbpath + 1, sizeof(xpath_node_t));
+				memcpy(tmp_node, ctx->first_node, ctx->nbpath * sizeof(xpath_node_t));
+				free(ctx->first_node);
+				ctx->first_node = tmp_node;
+				ctx->wait_first_node = 1;
+				ctx->new_node = tmp_node + ctx->nbpath;
+				ctx->new_node->rel = ROXML_OPERATOR_AND;
+				ctx->nbpath++;
+			} else if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+				if (ctx->new_cond->func != ROXML_FUNC_XPATH) {
+					chunk[-1] = '\0';
+					cur += strlen(ROXML_COND_AND);
+					tmp_cond = (xpath_cond_t *) calloc(1, sizeof(xpath_cond_t));
+					if (ctx->new_cond) {
+						ctx->new_cond->next = tmp_cond;
+					}
+					ctx->new_cond = tmp_cond;
+					ctx->new_cond->rel = ROXML_OPERATOR_AND;
+					ctx->new_cond->arg1 = chunk + cur + 1;
+				}
+			}
+		}
+	}
+	if (cur)
+		ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_path_or(char *chunk, void *data)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	xpath_node_t *tmp_node;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+
+	if (!ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		chunk[-1] = '\0';
+		cur += strlen(ROXML_PATH_OR);
+		tmp_node = (xpath_node_t *) calloc(ctx->nbpath + 1, sizeof(xpath_node_t));
+		memcpy(tmp_node, ctx->first_node, ctx->nbpath * sizeof(xpath_node_t));
+		free(ctx->first_node);
+		ctx->first_node = tmp_node;
+		ctx->wait_first_node = 1;
+		ctx->new_node = tmp_node + ctx->nbpath;
+		ctx->new_node->rel = ROXML_OPERATOR_OR;
+		ctx->nbpath++;
+	}
+	ctx->shorten_cond = 0;
+	return cur;
+}
+
+static int _func_xpath_operators(char *chunk, void *data, int operator, int operator_bis)
+{
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	if (!ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		xpath_node_t *xp_root = ctx->new_node;
+		xpath_cond_t *xp_cond = (xpath_cond_t *) calloc(1, sizeof(xpath_cond_t));
+		xp_root->xp_cond = xp_cond;
+		chunk[cur] = '\0';
+		xp_cond->op = operator;
+		if (ROXML_WHITE(chunk[cur - 1])) {
+			chunk[cur - 1] = '\0';
+		}
+		if (chunk[cur + 1] == '=') {
+			cur++;
+			chunk[cur] = '\0';
+			xp_cond->op = operator_bis;
+		}
+		if (ROXML_WHITE(chunk[cur + 1])) {
+			cur++;
+			chunk[cur] = '\0';
+		}
+		xp_cond->arg2 = chunk + cur + 1;
+		if (xp_cond->arg2[0] == '"') {
+			ctx->content_quoted = MODE_COMMENT_DQUOTE;
+			xp_cond->arg2++;
+		} else if (xp_cond->arg2[0] == '\'') {
+			ctx->content_quoted = MODE_COMMENT_QUOTE;
+			xp_cond->arg2++;
+		}
+		if (!xp_cond->func) {
+			xp_cond->func = ROXML_FUNC_INTCOMP;
+			if (!roxml_is_number(xp_cond->arg2)) {
+				xp_cond->func = ROXML_FUNC_STRCOMP;
+			}
+		}
+		cur++;
+	} else if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		if (ctx->new_cond->func != ROXML_FUNC_XPATH) {
+			chunk[cur] = '\0';
+			ctx->new_cond->op = operator;
+			if (ROXML_WHITE(chunk[cur - 1])) {
+				chunk[cur - 1] = '\0';
+			}
+			if (chunk[cur + 1] == '=') {
+				cur++;
+				chunk[cur] = '\0';
+				ctx->new_cond->op = operator_bis;
+			}
+			if (ROXML_WHITE(chunk[cur + 1])) {
+				cur++;
+				chunk[cur] = '\0';
+			}
+			ctx->new_cond->arg2 = chunk + cur + 1;
+			if (ctx->new_cond->arg2[0] == '"') {
+				ctx->content_quoted = MODE_COMMENT_DQUOTE;
+				ctx->new_cond->arg2++;
+			} else if (ctx->new_cond->arg2[0] == '\'') {
+				ctx->content_quoted = MODE_COMMENT_QUOTE;
+				ctx->new_cond->arg2++;
+			}
+			if (ctx->new_cond->func == 0) {
+				ctx->new_cond->func = ROXML_FUNC_INTCOMP;
+				if (!roxml_is_number(ctx->new_cond->arg2)) {
+					ctx->new_cond->func = ROXML_FUNC_STRCOMP;
+				}
+			}
+			cur++;
+		}
+	}
+	ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_operator_equal(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_operators(chunk, data, ROXML_OPERATOR_EQU, ROXML_OPERATOR_EQU);
+}
+
+int _func_xpath_operator_sup(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_operators(chunk, data, ROXML_OPERATOR_SUP, ROXML_OPERATOR_ESUP);
+}
+
+int _func_xpath_operator_inf(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_operators(chunk, data, ROXML_OPERATOR_INF, ROXML_OPERATOR_EINF);
+}
+
+int _func_xpath_operator_diff(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_operators(chunk, data, ROXML_OPERATOR_DIFF, ROXML_OPERATOR_DIFF);
+}
+
+int _func_xpath_number(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		if ((ctx->new_cond->func != ROXML_FUNC_XPATH) && (ctx->shorten_cond)) {
+			cur = 1;
+			ctx->new_cond->func = ROXML_FUNC_POS;
+			ctx->new_cond->op = ROXML_OPERATOR_EQU;
+			ctx->new_cond->arg2 = chunk;
+			while ((chunk[cur + 1] >= '0') && (chunk[cur + 1] <= '9')) {
+				cur++;
+			}
+		}
+	}
+	ctx->shorten_cond = 0;
+	return cur;
+}
+
+static int _func_xpath_funcs(char *chunk, void *data, int func, char *name)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+
+	if (strncmp(chunk, name, strlen(name)) == 0) {
+		if (ctx->new_cond->func != func) {
+			cur += strlen(name);
+			ctx->new_cond->func = func;
+		}
+	}
+	if (cur)
+		ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_position(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_funcs(chunk, data, ROXML_FUNC_POS, ROXML_FUNC_POS_STR);
+}
+
+int _func_xpath_first(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_funcs(chunk, data, ROXML_FUNC_FIRST, ROXML_FUNC_FIRST_STR);
+}
+
+int _func_xpath_last(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_funcs(chunk, data, ROXML_FUNC_LAST, ROXML_FUNC_LAST_STR);
+}
+
+int _func_xpath_nsuri(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	return _func_xpath_funcs(chunk, data, ROXML_FUNC_NSURI, ROXML_FUNC_NSURI_STR);
+}
+
+int _func_xpath_operator_add(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		if (ctx->new_cond->func != ROXML_FUNC_XPATH) {
+			if ((ctx->new_cond->func == ROXML_FUNC_LAST) || (ctx->new_cond->func == ROXML_FUNC_FIRST)) {
+				ctx->new_cond->op = ROXML_OPERATOR_ADD;
+			}
+			chunk[cur] = '\0';
+			if (ROXML_WHITE(chunk[cur + 1])) {
+				cur++;
+				chunk[cur] = '\0';
+			}
+			ctx->new_cond->arg2 = chunk + cur + 1;
+		}
+	}
+	ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_operator_subs(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+	int cur = 0;
+	if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		if (ctx->new_cond->func != ROXML_FUNC_XPATH) {
+			if ((ctx->new_cond->func == ROXML_FUNC_LAST) || (ctx->new_cond->func == ROXML_FUNC_FIRST)) {
+				ctx->new_cond->op = ROXML_OPERATOR_SUB;
+			}
+			chunk[cur] = '\0';
+			if (ROXML_WHITE(chunk[cur + 1])) {
+				cur++;
+				chunk[cur] = '\0';
+			}
+			ctx->new_cond->arg2 = chunk + cur + 1;
+		}
+	}
+	ctx->shorten_cond = 0;
+	return cur;
+}
+
+int _func_xpath_default(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 0;
+	roxml_xpath_ctx_t *ctx = (roxml_xpath_ctx_t *) data;
+
+	if ((ctx->is_first_node) || (ctx->wait_first_node)) {
+		if (!ctx->quoted && !ctx->dquoted && !ctx->parenthesys && !ctx->bracket) {
+			int offset = 0;
+			xpath_node_t *tmp_node = (xpath_node_t *) calloc(1, sizeof(xpath_node_t));
+			if ((chunk[cur] == '/') && (ctx->is_first_node)) {
+				free(tmp_node);
+				ctx->new_node = ctx->first_node;
+				ctx->first_node->abs = 1;
+			} else if ((chunk[cur] == '/') && (ctx->wait_first_node)) {
+				free(tmp_node);
+				ctx->first_node->abs = 1;
+			} else if ((ctx->is_first_node) || (ctx->wait_first_node)) {
+				free(tmp_node);
+			} else {
+				if (ctx->new_node) {
+					ctx->new_node->next = tmp_node;
+				}
+				ctx->new_node = tmp_node;
+			}
+			ctx->is_first_node = 0;
+			ctx->wait_first_node = 0;
+			ctx->new_node = roxml_set_axes(ctx->new_node, chunk + cur, &offset);
+			cur += offset;
+		}
+	} else if (ctx->bracket && !ctx->quoted && !ctx->dquoted) {
+		if (ctx->new_cond->func != ROXML_FUNC_XPATH) {
+			if (ctx->shorten_cond) {
+				int bracket_lvl = 1;
+				ctx->new_cond->func = ROXML_FUNC_XPATH;
+				ctx->new_cond->arg1 = chunk + cur;
+				while (bracket_lvl > 0) {
+					if (chunk[cur] == '[') {
+						bracket_lvl++;
+					} else if (chunk[cur] == ']') {
+						bracket_lvl--;
+					}
+					cur++;
+				}
+				cur--;
+			}
+		}
+	}
+	ctx->shorten_cond = 0;
+	return cur > 0 ? cur : 1;
+}
+#endif /* CONFIG_XML_XPATH_ENGINE */
+
+int _func_load_quoted(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	if (context->state != STATE_NODE_CONTENT && context->state != STATE_NODE_COMMENT) {
+		if (context->mode == MODE_COMMENT_NONE) {
+			context->mode = MODE_COMMENT_QUOTE;
+		} else if (context->mode == MODE_COMMENT_QUOTE) {
+			context->mode = MODE_COMMENT_NONE;
+		}
+	}
+
+	return 0;
+}
+
+int _func_load_dquoted(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	if (context->state != STATE_NODE_CONTENT && context->state != STATE_NODE_COMMENT) {
+		if (context->mode == MODE_COMMENT_NONE) {
+			context->mode = MODE_COMMENT_DQUOTE;
+		} else if (context->mode == MODE_COMMENT_DQUOTE) {
+			context->mode = MODE_COMMENT_NONE;
+		}
+	}
+
+	return 0;
+}
+
+int _func_load_open_node(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	switch (context->state) {
+	case STATE_NODE_CDATA:
+	case STATE_NODE_COMMENT:
+	case STATE_NODE_ATTR:
+		break;
+	default:
+		context->state = STATE_NODE_BEG;
+		context->previous_state = STATE_NODE_BEG;
+		break;
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_close_node(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	switch (context->state) {
+	case STATE_NODE_NAME:
+		context->empty_text_node = 1;
+		context->current_node = roxml_append_node(context->current_node, context->candidat_node);
+		break;
+	case STATE_NODE_ATTR:
+		if ((context->mode != MODE_COMMENT_DQUOTE) && (context->mode != MODE_COMMENT_QUOTE)) {
+			if (context->inside_node_state == STATE_INSIDE_VAL) {
+				node_t *to_be_closed = NULL;
+				if (context->content_quoted) {
+					context->content_quoted = 0;
+					to_be_closed =
+					    roxml_create_node(context->pos - 1, context->src,
+							      ROXML_ATTR_NODE | context->type);
+				} else {
+					to_be_closed =
+					    roxml_create_node(context->pos, context->src,
+							      ROXML_ATTR_NODE | context->type);
+				}
+				roxml_close_node(context->candidat_val, to_be_closed);
+			}
+			context->current_node = roxml_append_node(context->current_node, context->candidat_node);
+			context->inside_node_state = STATE_INSIDE_ARG_BEG;
+			roxml_process_unaliased_ns(context);
+		} else {
+			context->pos++;
+			return 1;
+		}
+		break;
+	case STATE_NODE_SINGLE:
+		if (context->doctype) {
+			context->doctype--;
+			if (context->doctype > 0) {
+				context->pos++;
+				return 1;
+			}
+			context->candidat_node->end = context->pos;
+		}
+		context->empty_text_node = 1;
+		context->current_node = roxml_append_node(context->current_node, context->candidat_node);
+		if (context->current_node->prnt != NULL) {
+			context->current_node = context->current_node->prnt;
+		}
+		roxml_process_unaliased_ns(context);
+		break;
+	case STATE_NODE_END:
+		context->empty_text_node = 1;
+		roxml_close_node(context->current_node, context->candidat_node);
+		context->candidat_node = NULL;
+		if (context->current_node->prnt != NULL) {
+			context->current_node = context->current_node->prnt;
+		}
+		break;
+	case STATE_NODE_CDATA:
+	case STATE_NODE_CONTENT:
+	default:
+		context->pos++;
+		return 1;
+		break;
+	}
+
+	if (context->candidat_node && context->candidat_node->ns
+	    && ((context->candidat_node->ns->type & ROXML_INVALID) == ROXML_INVALID)) {
+		roxml_free_node(context->candidat_node->ns);
+		context->candidat_node->ns = NULL;
+	}
+
+	context->state = STATE_NODE_CONTENT;
+	context->previous_state = STATE_NODE_CONTENT;
+	context->candidat_txt = roxml_create_node(context->pos + 1, context->src, ROXML_TXT_NODE | context->type);
+#ifdef IGNORE_EMPTY_TEXT_NODES
+	while (chunk[cur] != '\0') {
+		if (chunk[cur] == '<') {
+			break;
+		} else if (!ROXML_WHITE(chunk[cur])) {
+			context->empty_text_node = 0;
+			break;
+		}
+		cur++;
+	}
+#endif /* IGNORE_EMPTY_TEXT_NODES */
+	while ((chunk[cur] != '<') && (chunk[cur] != '\0')) {
+		cur++;
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_open_spec_node(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	if (context->state == STATE_NODE_BEG) {
+		if (strncmp(chunk, "!--", 3) == 0) {
+			cur = 3;
+			roxml_process_begin_node(context, context->pos - 1);
+			roxml_set_type(context->candidat_node, ROXML_CMT_NODE);
+			context->state = STATE_NODE_COMMENT;
+			while ((chunk[cur] != '-') && (chunk[cur] != '\0')) {
+				cur++;
+			}
+		} else if (strncmp(chunk, "![CDATA[", 8) == 0) {
+			roxml_process_begin_node(context, context->pos - 1);
+			roxml_set_type(context->candidat_node, ROXML_CDATA_NODE);
+			context->state = STATE_NODE_CDATA;
+			while ((chunk[cur] != '[') && (chunk[cur] != '\0')) {
+				cur++;
+			}
+		} else {
+			if (context->doctype == 0) {
+				roxml_process_begin_node(context, context->pos - 1);
+				roxml_set_type(context->candidat_node, ROXML_DOCTYPE_NODE);
+			}
+			context->state = STATE_NODE_SINGLE;
+			context->previous_state = STATE_NODE_SINGLE;
+			context->doctype++;
+		}
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_close_comment(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	if (context->state == STATE_NODE_COMMENT) {
+		if (chunk[1] == '-') {
+			cur = 2;
+			context->state = STATE_NODE_SINGLE;
+			context->candidat_node->end = context->pos;
+		}
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_close_cdata(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	if (context->state == STATE_NODE_CDATA) {
+		if (chunk[1] == ']') {
+			cur = 2;
+			context->state = STATE_NODE_SINGLE;
+			context->candidat_node->pos += 9;
+			context->candidat_node->end = context->pos;
+		}
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_close_pi(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	if (context->state == STATE_NODE_BEG) {
+		cur = 1;
+		context->state = STATE_NODE_PI;
+		context->previous_state = STATE_NODE_PI;
+		roxml_process_begin_node(context, context->pos - 1);
+		roxml_set_type(context->candidat_node, ROXML_PI_NODE);
+		//      while((chunk[cur] != '?')&&(chunk[cur] != '\0')) { cur++; }
+	} else if (context->state == STATE_NODE_PI) {
+		if (context->mode == MODE_COMMENT_NONE) {
+			cur = 1;
+			context->candidat_node->end = context->pos;
+			context->previous_state = STATE_NODE_PI;
+			context->state = STATE_NODE_SINGLE;
+		}
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_end_node(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	switch (context->state) {
+	case STATE_NODE_BEG:
+		roxml_process_begin_node(context, context->pos - 1);
+		context->state = STATE_NODE_END;
+		break;
+	case STATE_NODE_NAME:
+		context->state = STATE_NODE_SINGLE;
+		break;
+	case STATE_NODE_ATTR:
+		if ((context->mode != MODE_COMMENT_DQUOTE) && (context->mode != MODE_COMMENT_QUOTE)) {
+			if (context->inside_node_state == STATE_INSIDE_VAL) {
+				node_t *to_be_closed = NULL;
+				if (context->content_quoted) {
+					context->content_quoted = 0;
+					to_be_closed =
+					    roxml_create_node(context->pos - 1, context->src,
+							      ROXML_ATTR_NODE | context->type);
+				} else {
+					to_be_closed =
+					    roxml_create_node(context->pos, context->src,
+							      ROXML_ATTR_NODE | context->type);
+				}
+				roxml_close_node(context->candidat_val, to_be_closed);
+			}
+			context->inside_node_state = STATE_INSIDE_ARG_BEG;
+			context->state = STATE_NODE_SINGLE;
+		}
+		break;
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_white(char *chunk, void *data)
+{
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+
+	switch (context->state) {
+	case STATE_NODE_SINGLE:
+		context->state = context->previous_state;
+		break;
+	case STATE_NODE_NAME:
+		context->state = STATE_NODE_ATTR;
+		context->inside_node_state = STATE_INSIDE_ARG_BEG;
+		break;
+	case STATE_NODE_ATTR:
+		if (context->mode == MODE_COMMENT_NONE) {
+			if (context->inside_node_state == STATE_INSIDE_VAL) {
+				node_t *to_be_closed = NULL;
+				if (context->content_quoted) {
+					context->content_quoted = 0;
+					to_be_closed =
+					    roxml_create_node(context->pos - 1, context->src,
+							      ROXML_ATTR_NODE | context->type);
+				} else {
+					to_be_closed =
+					    roxml_create_node(context->pos, context->src,
+							      ROXML_ATTR_NODE | context->type);
+				}
+				roxml_close_node(context->candidat_val, to_be_closed);
+				context->inside_node_state = STATE_INSIDE_ARG_BEG;
+				roxml_process_unaliased_ns(context);
+			}
+		}
+		break;
+	}
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_colon(char *chunk, void *data)
+{
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+
+	if (context->state == STATE_NODE_NAME) {
+		context->state = STATE_NODE_BEG;
+		context->candidat_node->ns = roxml_lookup_nsdef(context->namespaces, context->curr_name);
+		if (!context->candidat_node->ns) {
+			char *nsname = malloc(context->curr_name_len + 1);
+			memcpy(nsname, context->curr_name, context->curr_name_len);
+			nsname[context->curr_name_len] = '\0';
+			context->candidat_node->ns =
+			    roxml_create_node(0, nsname, ROXML_NSDEF_NODE | ROXML_PENDING | ROXML_INVALID);
+		}
+		context->candidat_node->pos += context->curr_name_len + 2;
+		context->ns = 1;
+	} else if (context->state == STATE_NODE_ATTR) {
+		if (context->inside_node_state == STATE_INSIDE_ARG) {
+			context->inside_node_state = STATE_INSIDE_ARG_BEG;
+			if ((context->curr_name_len == 5) && (strncmp(context->curr_name, "xmlns", 5) == 0)) {
+				context->candidat_arg->type |= ROXML_NS_NODE;
+				context->nsdef = 1;
+			} else {
+				context->candidat_arg->ns = roxml_lookup_nsdef(context->namespaces, context->curr_name);
+				context->candidat_arg->pos += context->curr_name_len + 2;
+				context->ns = 1;
+			}
+
+		}
+	}
+
+	context->pos += cur;
+	return cur;
+}
+
+int _func_load_default(char *chunk, void *data)
+{
+	int cur = 1;
+	roxml_load_ctx_t *context = (roxml_load_ctx_t *) data;
+#ifdef DEBUG_PARSING
+	fprintf(stderr, "calling func %s chunk %c\n", __func__, chunk[0]);
+#endif /* DEBUG_PARSING */
+
+	switch (context->state) {
+	case STATE_NODE_SINGLE:
+		context->state = context->previous_state;
+		break;
+	case STATE_NODE_BEG:
+		if (context->ns == 0) {
+			roxml_process_begin_node(context, context->pos - 1);
+		}
+		context->ns = 0;
+		context->state = STATE_NODE_NAME;
+		context->curr_name = chunk;
+		while (!ROXML_WHITE(chunk[cur]) && (chunk[cur] != '>') && (chunk[cur] != '/') && (chunk[cur] != ':')
+		       && (chunk[cur] != '\0')) {
+			cur++;
+		}
+		context->curr_name_len = cur;
+		break;
+	case STATE_NODE_ATTR:
+		if (context->inside_node_state == STATE_INSIDE_ARG_BEG) {
+			if (context->nsdef) {
+				if (context->namespaces == NULL) {
+					context->namespaces = context->candidat_arg;
+					context->last_ns = context->candidat_arg;
+				} else {
+					context->last_ns->next = context->candidat_arg;
+					context->last_ns = context->candidat_arg;
+				}
+			} else if (context->ns == 0) {
+				context->candidat_arg =
+				    roxml_create_node(context->pos - 1, context->src, ROXML_ATTR_NODE | context->type);
+				context->candidat_arg =
+				    roxml_append_node(context->candidat_node, context->candidat_arg);
+			}
+			context->ns = 0;
+			context->inside_node_state = STATE_INSIDE_ARG;
+			context->curr_name = chunk;
+			while ((chunk[cur] != '=') && (chunk[cur] != '>') && (chunk[cur] != ':')
+			       && (chunk[cur] != '\0')) {
+				cur++;
+			}
+			context->curr_name_len = cur;
+			if (context->nsdef) {
+				roxml_ns_t *ns = calloc(1, sizeof(roxml_ns_t) + (1 + context->curr_name_len));
+				ns->id = ROXML_NS_ID;
+				ns->alias = (char *)ns + sizeof(roxml_ns_t);
+				memcpy(ns->alias, context->curr_name, context->curr_name_len);
+				context->candidat_arg->priv = ns;
+				context->nsdef = 0;
+				if (context->candidat_node->ns) {
+					if ((context->candidat_node->ns->type & ROXML_INVALID) == ROXML_INVALID) {
+						if (strcmp(context->candidat_arg->prnt->ns->src.buf, ns->alias) == 0) {
+							roxml_free_node(context->candidat_node->ns);
+							context->candidat_node->ns = context->candidat_arg;
+						}
+					}
+				}
+			}
+		} else if (context->inside_node_state == STATE_INSIDE_VAL_BEG) {
+			if (context->mode != MODE_COMMENT_NONE) {
+				context->content_quoted = 1;
+				context->candidat_val =
+				    roxml_create_node(context->pos + 1, context->src, ROXML_TXT_NODE | context->type);
+			} else {
+				context->candidat_val =
+				    roxml_create_node(context->pos, context->src, ROXML_TXT_NODE | context->type);
+			}
+			context->candidat_val = roxml_append_node(context->candidat_arg, context->candidat_val);
+			context->inside_node_state = STATE_INSIDE_VAL;
+		} else if ((context->inside_node_state == STATE_INSIDE_ARG) && (chunk[0] == '=')) {
+			node_t *to_be_closed;
+
+			context->inside_node_state = STATE_INSIDE_VAL_BEG;
+			to_be_closed = roxml_create_node(context->pos, context->src, ROXML_ATTR_NODE | context->type);
+			roxml_close_node(context->candidat_arg, to_be_closed);
+			if ((context->curr_name_len == 5) && (strncmp(context->curr_name, "xmlns", 5) == 0)) {
+				context->nsdef = 1;
+				if (context->namespaces == NULL) {
+					context->namespaces = context->candidat_arg;
+					context->last_ns = context->candidat_arg;
+				} else {
+					context->last_ns->next = context->candidat_arg;
+					context->last_ns = context->candidat_arg;
+				}
+			}
+		}
+		break;
+	}
+
+	context->pos += cur;
+	return cur;
+}
diff --git a/Libs/libroxml-2.3.0/src/roxml-parse-engine.h b/Libs/libroxml-2.3.0/src/roxml-parse-engine.h
new file mode 100644
index 0000000000000000000000000000000000000000..7eaa90220a3658f781af9dfa468081f6cd72bbdc
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-parse-engine.h
@@ -0,0 +1,119 @@
+/** \file roxml-parse-engine.h
+ *  \brief header for libroxml.so
+ *
+ * This is the source file for lib libroxml.so internal functions
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 20 Fev 2010
+ *
+ * Copyright (C) 2010 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef ROXML_PARSE_ENGINE_H
+#define ROXML_PARSE_ENGINE_H
+
+/** \brief parser item creation function
+ *
+ * \fn roxml_append_parser_item(roxml_parser_item_t *head, char * key, roxml_parse_func func);
+ * this function create a new parser item and append it to the parser list.
+ * \param head the parser head list or NULL for first item
+ * \param key the char to trigger callback for
+ * \param func the function to call on match
+ * \return the head item
+ */
+roxml_parser_item_t ROXML_INT *roxml_append_parser_item(roxml_parser_item_t * head, char *key, roxml_parse_func func);
+
+/** \brief parser table deletion 
+ *
+ * \fn roxml_parser_free(roxml_parser_item_t *head);
+ * this function delete a prepared parser object
+ * \param head the parser object
+ * \return
+ */
+void ROXML_INT roxml_parser_free(roxml_parser_item_t * head);
+
+/** \brief parser list deletion
+ *
+ * \fn roxml_parser_clear(roxml_parser_item_t *head);
+ * this function delete a parser list (when not yet prepared)
+ * \param head the parser object
+ * \return
+ */
+void ROXML_INT roxml_parser_clear(roxml_parser_item_t * head);
+
+/** \brief line parsing function
+ *
+ * \fn roxml_parse_line(roxml_parser_item_t * head, char *line, int len, void * ctx);
+ * this function parse a line : it calls parsing functions when key matches
+ * \param head the parser object
+ * \param line the string to parse
+ * \param len the len of string or 0 if auto calculate len (using \0)
+ * \param ctx user data passed to the callbacks
+ * \return the number of bytes processed
+ */
+int ROXML_INT roxml_parse_line(roxml_parser_item_t * head, char *line, int len, void *ctx);
+
+/** \brief parser preparation function
+ *
+ * \fn roxml_parser_prepare(roxml_parser_item_t *head);
+ * this function compile a parser list into a table and calculate count variables for parsing optim
+ * \param head the parser object
+ * \return
+ */
+roxml_parser_item_t ROXML_INT *roxml_parser_prepare(roxml_parser_item_t * head);
+
+// xpath parser functions
+int _func_xpath_ignore(char *chunk, void *data);
+int _func_xpath_new_node(char *chunk, void *data);
+int _func_xpath_quote(char *chunk, void *data);
+int _func_xpath_dquote(char *chunk, void *data);
+int _func_xpath_open_parenthesys(char *chunk, void *data);
+int _func_xpath_close_parenthesys(char *chunk, void *data);
+int _func_xpath_open_brackets(char *chunk, void *data);
+int _func_xpath_close_brackets(char *chunk, void *data);
+int _func_xpath_condition_or(char *chunk, void *data);
+int _func_xpath_condition_and(char *chunk, void *data);
+int _func_xpath_path_or(char *chunk, void *data);
+int _func_xpath_operator_equal(char *chunk, void *data);
+int _func_xpath_operator_sup(char *chunk, void *data);
+int _func_xpath_operator_inf(char *chunk, void *data);
+int _func_xpath_operator_diff(char *chunk, void *data);
+int _func_xpath_number(char *chunk, void *data);
+int _func_xpath_position(char *chunk, void *data);
+int _func_xpath_first(char *chunk, void *data);
+int _func_xpath_last(char *chunk, void *data);
+int _func_xpath_nsuri(char *chunk, void *data);
+int _func_xpath_operator_add(char *chunk, void *data);
+int _func_xpath_operator_subs(char *chunk, void *data);
+int _func_xpath_default(char *chunk, void *data);
+int _func_xpath_all(char *chunk, void *data);
+
+// load parser functions
+int _func_load_quoted(char *chunk, void *data);
+int _func_load_dquoted(char *chunk, void *data);
+int _func_load_open_spec_node(char *chunk, void *data);
+int _func_load_close_cdata(char *chunk, void *data);
+int _func_load_close_comment(char *chunk, void *data);
+int _func_load_close_pi(char *chunk, void *data);
+int _func_load_open_node(char *chunk, void *data);
+int _func_load_close_node(char *chunk, void *data);
+int _func_load_end_node(char *chunk, void *data);
+int _func_load_white(char *chunk, void *data);
+int _func_load_colon(char *chunk, void *data);
+int _func_load_default(char *chunk, void *data);
+
+#endif /* ROXML_PARSE_ENGINE_H */
diff --git a/Libs/libroxml-2.3.0/src/roxml-parser.c b/Libs/libroxml-2.3.0/src/roxml-parser.c
new file mode 100644
index 0000000000000000000000000000000000000000..d07dd0379dce0e09b43683ae3ee7bdd87b5234cb
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-parser.c
@@ -0,0 +1,138 @@
+/** \file roxml-parser.c
+ *  \brief command line xml parser
+ *
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 19 Feb 2009
+ *
+ * Copyright (C) 2009 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "roxml.h"
+#include <sys/types.h>
+#include <sys/stat.h>
+
+void print_help(void)
+{
+	fprintf(stderr, "LGPL command line XML parser\n<blunderer@blunderer.org>\n");
+}
+
+void print_usage(const char *progname)
+{
+	fprintf(stderr, "\nusage: %s [-q|-h] <filename> [/]<node1>/<node2>/<node3>/.../<nodeN>\n", progname);
+	fprintf(stderr, "-q|--quiet activate quiet mode\n-h|--help display this message\n");
+}
+
+int main(int argc, char **argv)
+{
+	int optind;
+	int quiet = 0;
+	int j, max;
+	node_t *root;
+	node_t *cur;
+	node_t **ans;
+
+	for (optind = 1; optind < argc; optind++) {
+		int option = 0;
+		if (argv[optind][0] == '-') {
+			/* this is an option */
+			if (argv[optind][1] == '-') {
+				/* long option */
+				if (strcmp(argv[optind], "--help") == 0) {
+					option = 'h';
+				} else if (strcmp(argv[optind], "--quiet") == 0) {
+					option = 'q';
+				}
+			} else {
+				/* short option */
+				if (strcmp(argv[optind], "-h") == 0) {
+					option = 'h';
+				} else if (strcmp(argv[optind], "-q") == 0) {
+					option = 'q';
+				}
+			}
+		} else {
+			break;
+		}
+		switch (option) {
+		case 'q':
+			quiet = 1;
+			break;
+		case 'h':
+			print_help();
+			print_usage(argv[0]);
+			return EXIT_FAILURE;
+			break;
+		default:
+			print_usage(argv[0]);
+			return EXIT_FAILURE;
+			break;
+		}
+	}
+
+	if (argc < optind + 2) {
+		fprintf(stderr, "wrong syntax\n");
+		print_usage(argv[0]);
+		return -1;
+	}
+
+	root = roxml_load_doc(argv[optind]);
+	cur = root;
+	if (root == NULL) {
+		fprintf(stdout, "no such file '%s'\n", argv[optind]);
+	}
+
+	ans = roxml_xpath(cur, argv[optind + 1], &max);
+
+	for (j = 0; j < max; j++) {
+		char *c = NULL;
+
+		c = roxml_get_content(ans[j], NULL, 0, NULL);
+		if (c) {
+			if (*c == 0) {
+				char *s = NULL;
+				int i = 0;
+				int nb_chld = roxml_get_chld_nb(ans[j]);
+
+				for (i = 0; i < nb_chld; i++) {
+					node_t *child = roxml_get_chld(ans[j], NULL, i);
+					node_t *ns = roxml_get_ns(child);
+					c = roxml_get_name(child, NULL, 0);
+					if (!quiet) {
+						fprintf(stdout, "ans[%d]: ", j);
+					}
+					if (ns) {
+						s = roxml_get_name(ns, NULL, 0);
+						if (strlen(s)) {
+							fprintf(stdout, "%s:", s);
+						}
+					}
+					fprintf(stdout, "%s\n", c);
+				}
+			} else {
+				if (!quiet) {
+					fprintf(stdout, "ans[%d]: ", j);
+				}
+				fprintf(stdout, "%s\n", c);
+			}
+		}
+	}
+	roxml_release(RELEASE_ALL);
+
+	roxml_close(root);
+	return 0;
+}
diff --git a/Libs/libroxml-2.3.0/src/roxml-tune.h b/Libs/libroxml-2.3.0/src/roxml-tune.h
new file mode 100644
index 0000000000000000000000000000000000000000..f41eaedb88da0772a4ea142bb2be70beea30ecdd
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-tune.h
@@ -0,0 +1,164 @@
+/** \file roxml-tune.h
+ *  \brief header for libroxml.so
+ *         
+ * This is the header file used to tune libroxml.
+ * It contains the default options taht should fit
+ * all standard systems.
+ * Change this file only if you *really* know what you are doing.
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 11 May 2012
+ *
+ * Copyright (C) 2012 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/** \page roxml-tune tuning libroxml
+ *
+ * Being dedicated to embedded systems, libroxml include the ability to tune its behaviour.
+ * files \file roxml-tune.h, \file roxml-tiny.h and \file site.in are used for that purpose.
+ * 
+ * \section tune <roxml-tune>
+ * This file describe all options that can be used. Each consist of a #define CONFIG_XML_xxx set to
+ * either 0 or 1. This file describes default values and should not be modified but to had options. 
+ *
+ * This file also implements some tuning options. We try not to use #defines all over the code except 
+ * to activate or remove some portion. Instead, we do define macros.
+ *
+ * \section tune_end </roxml-tune>
+ *
+ * \section mk <site.mk>
+ * This file is actually not handled in the source control system. The sample site.in is provided. Creating the site.mk
+ * file in the libroxml root directory will automagically turn the USER DEFINED CONF behaviour.
+ * Users should activate or remove options using this file.
+ * All options are describer into file \file roxml-tune.h
+ *
+ * \section mk_end </roxml.mk>
+ *
+ */
+
+#ifndef ROXML_TUNE_H
+#define ROXML_TUNE_H
+
+#ifdef ROXML_DEF_H
+#error "roxml-defines.h must be included after roxml-tune.h to be tuned."
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/*************** Define the default behaviour **********************/
+
+/* Is the target library thread safe or not
+ * This option should be activated.
+ * If unsure, set to 1
+ */
+#ifndef CONFIG_XML_THREAD_SAFE
+#if(CONFIG_XML_HEAP_BUFFERS==1)
+#error "The CONFIG_XML_THREAD_SAFE option is not compatible with CONFIG_XML_HEAP_BUFFERS. Disable one of those."
+#endif
+#define CONFIG_XML_THREAD_SAFE	1
+#endif /* CONFIG_XML_THREAD_SAFE */
+
+/* Is the target library uses stack for internal
+ * buffers or heap. Stack require some RAM while heap
+ * can cut off performances.
+ * This option should not be activated.
+ * If unsure, set to 0
+ */
+#ifndef CONFIG_XML_HEAP_BUFFERS
+#define CONFIG_XML_HEAP_BUFFERS	0
+#endif /* CONFIG_XML_HEAP_BUFFERS */
+
+/* Define the size of internal buffer.
+ * For very small systems, large internal buffers
+ * can cause the systeml the behave strangely.
+ * This option should not be activated.
+ * If unsure, set to 0
+ */
+#ifndef CONFIG_XML_SMALL_BUFFER
+#define CONFIG_XML_SMALL_BUFFER	0
+#endif /* CONFIG_XML_SMALL_BUFFER */
+
+/* Limit the size of input XML libroxml can handle
+ * to 64kb instead of 4Gb.
+ * Setting this option will reduce the size of RAM loaded tree
+ * This option should not be activated.
+ * If unsure, set to 0
+ */
+#ifndef CONFIG_XML_SMALL_INPUT_FILE
+#define CONFIG_XML_SMALL_INPUT_FILE	0
+#endif /* CONFIG_XML_SMALL_INPUT_FILE */
+
+/* Can the target library modify XML tree
+ * When set to 0, this result in smaller binary.
+ * (this saves about 3kb)
+ * This option should be activated.
+ * If unsure, set to 1
+ */
+#ifndef CONFIG_XML_READ_WRITE
+#define CONFIG_XML_READ_WRITE		1
+#endif /* CONFIG_XML_READ_WRITE */
+
+/* Can the target library commit a tree
+ * When set to 0, this result in smaller binary.
+ * (this saves about 5kb)
+ * This option should be activated.
+ * If unsure, set to 1
+ */
+#ifndef CONFIG_XML_COMMIT_XML_TREE
+#define CONFIG_XML_COMMIT_XML_TREE	1
+#endif /* CONFIG_XML_COMMIT_XML_TREE */
+
+/* Can the target library perform xpath queries
+ * When set to 0, this result in smaller binary.
+ * (this saves about 20kb)
+ * This option should be activated.
+ * If unsure, set to 1
+ */
+#ifndef CONFIG_XML_XPATH_ENGINE
+#define CONFIG_XML_XPATH_ENGINE	1
+#endif /* CONFIG_XML_XPATH_ENGINE */
+
+/*************** Implement HEAP/STACK BUFFERS **********************/
+#if(CONFIG_XML_HEAP_BUFFERS==1)
+	#define ROXML_GET_BASE_BUFFER(name) char *name = malloc(ROXML_BASE_LEN)
+	#define ROXML_PUT_BASE_BUFFER(name) free(name)
+#else /* CONFIG_XML_HEAP_BUFFERS==0 */
+	#define ROXML_GET_BASE_BUFFER(name) char name[ROXML_BASE_LEN]
+	#define ROXML_PUT_BASE_BUFFER(name)
+#endif /* CONFIG_XML_HEAP_BUFFERS */
+
+/**************** Implement THREAD SAFETY **************************/
+#if(CONFIG_XML_THREAD_SAFE==0)
+	#define pthread_t			char
+	#define pthread_mutex_t			char
+
+	#define pthread_self()			0
+	#define pthread_mutex_init(a, b)
+	#define pthread_mutex_lock(a)		*(a) = 0
+	#define pthread_mutex_unlock(a)		*(a) = 0
+	#define pthread_mutex_destroy(a)
+#else /* CONFIG_XML_THREAD_SAFE==1 */
+	#if defined(_WIN32)
+		#include "roxml-win32-native.h"
+	#else
+		#include <pthread.h>
+	#endif
+#endif /* CONFIG_XML_THREAD_SAFE */
+
+#endif /* ROXML_TUNE_H */
diff --git a/Libs/libroxml-2.3.0/src/roxml-types.h b/Libs/libroxml-2.3.0/src/roxml-types.h
new file mode 100644
index 0000000000000000000000000000000000000000..146a3a1764f37a1774fb629cb42fc6c00abdb8cd
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-types.h
@@ -0,0 +1,238 @@
+/** \file roxml-types.h
+ *  \brief internal header for libroxml.so
+ *
+ * This is the internal header file used by roxml.c
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 23 Dec 2008
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef ROXML_TYPES_H
+#define ROXML_TYPES_H
+
+/** \typedef roxml_parse_func 
+ *
+ * \brief parser callback functions
+ * 
+ * This is the prototype for a parser callback function. It receive as argument
+ * the chunk that matched the key, and the context as a void. It should return the 
+ * number of handled bytes or 0 if doesn't want to handle this key
+ */
+typedef int (*roxml_parse_func) (char *chunk, void *data);
+
+/** \typedef roxml_pos_t
+ *
+ * \brief type for node indexes in raw tree
+ * 
+ * this is the type used for node indexes in raw tree.
+ * this type induce a maximum size for XML document
+ * that can be handled (both from file or buffer)
+ */
+#if(CONFIG_XML_SMALL_INPUT_FILE==1)
+typedef unsigned short roxml_pos_t;
+#else /* CONFIG_XML_SMALL_INPUT_FILE==0 */
+typedef unsigned int roxml_pos_t;
+#endif /* CONFIG_XML_SMALL_INPUT_FILE */
+
+/** \struct memory_cell_t
+ *
+ * \brief memory cell structure
+ * 
+ * This is the structure for a memory cell. It contains the
+ * pointer info and type. It also contains the caller id so that
+ * it can free without reference to a specific pointer
+ */
+typedef struct memory_cell {
+	int type;		/*!< pointer type from PTR_NODE, PTR_CHAR... */
+	int occ;		/*!< number of element */
+	void *ptr;		/*!< pointer */
+	pthread_t id;		/*!< thread id of allocator */
+	struct memory_cell *next;	/*!< next memory cell */
+	struct memory_cell *prev;	/*!< prev memory cell */
+} memory_cell_t;
+
+/** \struct xpath_cond_t
+ *
+ * \brief xpath cond structure
+ * 
+ * This is the structure for a xpath cond. It contains the
+ * node condition
+ */
+typedef struct _xpath_cond {
+	char rel;		/*!< relation with previous */
+	char axes;		/*!< axes for operator */
+	char op;		/*!< operator used */
+	char op2;		/*!< operator used on arg2 */
+	char func;		/*!< function to process */
+	char func2;		/*!< function to process in arg2 */
+	char *arg1;		/*!< condition arg1 as string */
+	char *arg2;		/*!< condition arg2 as string */
+	struct _xpath_node *xp;	/*!< xpath that have to be resolved for condition */
+	struct _xpath_cond *next;	/*!< next xpath condition pointer */
+} xpath_cond_t;
+
+/** \struct xpath_node_t
+ *
+ * \brief xpath node structure
+ * 
+ * This is the structure for a xpath node. It contains the
+ * node axes and conditions
+ */
+typedef struct _xpath_node {
+	char abs;		/*!< for first node: is path absolute */
+	char rel;		/*!< relation with previous */
+	char axes;		/*!< axes type */
+	char *name;		/*!< axes string */
+	struct _xpath_cond *xp_cond;	/*!< condition for total xpath */
+	struct _xpath_cond *cond;	/*!< condition list */
+	struct _xpath_node *next;	/*!< next xpath pointer */
+} xpath_node_t;
+
+/** \struct xpath_tok_table_t
+ *
+ * \brief xpath token structure
+ * 
+ * This is the structure for a xpath token. It contains the
+ * xpath id
+ */
+typedef struct _xpath_tok_table {
+	unsigned char id;	/*!< token id == ROXML_REQTABLE_ID */
+	unsigned char ids[256];	/*!< token id table */
+	pthread_mutex_t mut;	/*!< token table allocation mutex */
+	struct _xpath_tok *next;	/*!< next xpath token */
+} xpath_tok_table_t;
+
+/** \struct xpath_tok_t
+ *
+ * \brief xpath token structure
+ * 
+ * This is the structure for a xpath token. It contains the
+ * xpath id
+ */
+typedef struct _xpath_tok {
+	unsigned char id;	/*!< token id starts at ROXML_XPATH_FIRST_ID */
+	struct _xpath_tok *next;	/*!< next xpath token */
+} xpath_tok_t;
+
+/** \struct roxml_ns_t
+ *
+ * \brief namespace structure
+ * 
+ * This is the structure for a namespace. It contains the
+ * namespace alias
+ */
+typedef struct _roxml_ns {
+	unsigned char id;	/*!< priv id == ROXML_NS_ID */
+	void *next;		/*!< one other priv data is following */
+	char *alias;		/*!< ns alias */
+} roxml_ns_t;
+
+/** \struct node_t
+ *
+ * \brief node_t structure
+ * 
+ * This is the structure for a node. This struct is very
+ * little as it only contains offset for node in file and
+ * tree links
+ */
+typedef struct node {
+	unsigned short type;	/*!< document or buffer / attribute or value */
+	union {
+		char *buf;	/*!< buffer address */
+		FILE *fil;	/*!< loaded document */
+		void *src;	/*!< xml src address */
+	} src;			/*!< xml tree source */
+	roxml_pos_t pos;	/*!< offset of begining of opening node in file */
+	roxml_pos_t end;	/*!< offset of begining of closing node in file */
+	struct node *sibl;	/*!< ref to brother */
+	struct node *chld;	/*!< ref to chld */
+	struct node *prnt;	/*!< ref to parent */
+	struct node *attr;	/*!< ref to attribute */
+	struct node *next;	/*!< ref to last chld (internal use) */
+	struct node *ns;	/*!< ref to namespace definition */
+	void *priv;		/*!< ref to xpath tok (internal use) or alias for namespaces */
+} node_t;
+
+/** \struct roxml_load_ctx_t
+ *
+ * \brief xml parsing context
+ * 
+ * obscure structure that contains all the xml
+ * parsing variables
+ */
+typedef struct _roxml_load_ctx {
+	int pos;		/*!< position in file */
+	int empty_text_node;	/*!< if text node is empty (only contains tabs, spaces, carriage return and line feed */
+	int state;		/*!< state (state machine main var) */
+	int previous_state;	/*!< previous state */
+	int mode;		/*!< mode quoted or normal */
+	int inside_node_state;	/*!< sub state for attributes */
+	int content_quoted;	/*!< content of attribute was quoted */
+	int type;		/*!< source type (file or buffer) */
+	int nsdef;		/*!< indicate if this is a nsdef */
+	int ns;			/*!< indicate if a ns is used for this node */
+	void *src;		/*!< source (file or buffer) */
+	node_t *candidat_node;	/*!< node being processed */
+	node_t *candidat_txt;	/*!< text node being processed */
+	node_t *candidat_arg;	/*!< attr node being processed */
+	node_t *candidat_val;	/*!< attr value being processed */
+	node_t *current_node;	/*!< current node */
+	node_t *namespaces;	/*!< available namespaces */
+	node_t *last_ns;	/*!< last declared namespaces */
+	char *curr_name;	/*!< current node name (attr or elm) */
+	int curr_name_len;	/*!< current node name (attr or elm) lenght */
+	int doctype;		/*!< nested doctype count */
+} roxml_load_ctx_t;
+
+/** \struct roxml_xpath_ctx_t
+ * \brief xpath parsing context
+ * 
+ * obscure structure that contains all the xapth
+ * parsing variables
+ */
+typedef struct _roxml_xpath_ctx {
+	int pos;		/*!< position in string */
+	int is_first_node;	/*!< is it the first node of xpath */
+	int wait_first_node;	/*!< are we waiting for the first node of a xpath */
+	int shorten_cond;	/*!< is the cond a short condition */
+	int nbpath;		/*!< number of xpath in this string */
+	int bracket;		/*!< are we inside two brackets */
+	int parenthesys;	/*!< are we inside two parenthesys */
+	int quoted;		/*!< are we quoted (') */
+	int dquoted;		/*!< are we double quoted (") */
+	int context;		/*!< is it an inside xpath */
+	int content_quoted;	/*!< content of val was quoted */
+	xpath_node_t *first_node;	/*!< the very first node of xpath string */
+	xpath_node_t *new_node;	/*!< current xpath node */
+	xpath_cond_t *new_cond;	/*!< current xpath cond */
+} roxml_xpath_ctx_t;
+
+/** \struct roxml_parser_item_t
+ *
+ * \brief the parser item struct
+ * 
+ * this struct contains the key and callback.
+ */
+typedef struct _roxml_parser_item {
+	int count;		/*!< number of parser item with non null key (only for head) */
+	int def_count;		/*!< total number of parser item (only for head) */
+	char chunk;		/*!< key to match */
+	roxml_parse_func func;	/*!< callback function */
+	struct _roxml_parser_item *next;	/*!< next item */
+} roxml_parser_item_t;
+
+#endif /* ROXML_TYPES_H */
diff --git a/Libs/libroxml-2.3.0/src/roxml-win32-native.h b/Libs/libroxml-2.3.0/src/roxml-win32-native.h
new file mode 100644
index 0000000000000000000000000000000000000000..914e38b70566e88475316b883189d55eb255f717
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml-win32-native.h
@@ -0,0 +1,24 @@
+
+#ifndef ROXML_WIN32_NATIVE_THREAD_H
+#define ROXML_WIN32_NATIVE_THREAD_H
+
+#if defined(_MSC_VER) && _MSC_VER >= 1400
+#ifndef _CRT_SECURE_NO_DEPRECATE
+#define _CRT_SECURE_NO_DEPRECATE
+#endif
+#pragma warning(disable: 4996)
+#endif
+
+#define WIN32_LEAN_AND_MEAN
+#include <windows.h>
+
+typedef HANDLE pthread_t;
+typedef CRITICAL_SECTION pthread_mutex_t;
+
+#define pthread_self()                 GetCurrentThread()
+#define pthread_mutex_init(a, b)       InitializeCriticalSection(a)
+#define pthread_mutex_lock(a)          EnterCriticalSection(a)
+#define pthread_mutex_unlock(a)                LeaveCriticalSection(a)
+#define pthread_mutex_destroy(a)       DeleteCriticalSection(a)
+
+#endif /* ROXML_WIN32_NATIVE_THREAD_H */
diff --git a/Libs/libroxml-2.3.0/src/roxml.c b/Libs/libroxml-2.3.0/src/roxml.c
new file mode 100644
index 0000000000000000000000000000000000000000..0413f34080e76685e5578781252818e90c674567
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml.c
@@ -0,0 +1,933 @@
+/** \file roxml.c
+ *  \brief source for libroxml.so
+ *
+ * This is the source file for lib libroxml.so
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 23 Dec 2008
+ *
+ * Copyright (C) 2009 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "roxml-internal.h"
+
+void ROXML_API roxml_release(void *data)
+{
+	memory_cell_t *ptr = &head_cell;
+	memory_cell_t *to_delete = NULL;
+
+	if (data == RELEASE_LAST) {
+		while ((ptr->prev != NULL) && (ptr->prev->id != pthread_self())) {
+			ptr = ptr->prev;
+		}
+		if (ptr->prev == NULL) {
+			return;
+		}
+
+		to_delete = ptr->prev;
+
+		if (to_delete->next) {
+			to_delete->prev->next = to_delete->next;
+			to_delete->next->prev = to_delete->prev;
+		} else {
+			if (to_delete->prev != &head_cell) {
+				head_cell.prev = to_delete->prev;
+			} else {
+				head_cell.prev = NULL;
+			}
+			to_delete->prev->next = NULL;
+		}
+
+		if (PTR_IS_STAR(to_delete)) {
+			int i = 0;
+			for (i = 0; i < to_delete->occ; i++) {
+				free(((void **)(to_delete->ptr))[i]);
+			}
+		}
+		if (to_delete->type != PTR_NONE) {
+			free(to_delete->ptr);
+			to_delete->type = PTR_NONE;
+			free(to_delete);
+		}
+	} else if (data == RELEASE_ALL) {
+		head_cell.prev = NULL;
+		while ((head_cell.next != NULL)) {
+			to_delete = head_cell.next;
+			if (to_delete->next) {
+				to_delete->next->prev = &head_cell;
+			}
+			head_cell.next = to_delete->next;
+
+			if (PTR_IS_STAR(to_delete)) {
+				int i = 0;
+				for (i = 0; i < to_delete->occ; i++) {
+					free(((void **)(to_delete->ptr))[i]);
+				}
+			}
+			free(to_delete->ptr);
+			to_delete->ptr = NULL;
+			to_delete->type = PTR_NONE;
+			free(to_delete);
+		}
+	} else {
+		while ((ptr->next != NULL) && (ptr->next->ptr != data)) {
+			ptr = ptr->next;
+		}
+		if (ptr->next == NULL) {
+			return;
+		}
+
+		to_delete = ptr->next;
+		if (to_delete->next) {
+			to_delete->next->prev = ptr;
+		} else {
+			if (ptr == &head_cell) {
+				head_cell.prev = NULL;
+			} else {
+				head_cell.prev = to_delete->prev;
+			}
+		}
+		ptr->next = to_delete->next;
+		if (PTR_IS_STAR(to_delete)) {
+			int i = 0;
+			for (i = 0; i < to_delete->occ; i++) {
+				free(((void **)(to_delete->ptr))[i]);
+			}
+		}
+		free(to_delete->ptr);
+		to_delete->type = PTR_NONE;
+		free(to_delete);
+	}
+	if (head_cell.next == &head_cell) {
+		head_cell.next = NULL;
+	}
+	if (head_cell.prev == &head_cell) {
+		head_cell.prev = NULL;
+	}
+}
+
+char ROXML_API *roxml_get_content(node_t *n, char *buffer, int bufsize, int *size)
+{
+	int total = 0;
+	char *content = buffer;
+
+	if (n == NULL) {
+		if (size) {
+			*size = 0;
+		}
+		if (buffer) {
+			strcpy(buffer, "");
+			return buffer;
+		}
+		return NULL;
+	} else if (n->type & ROXML_ELM_NODE) {
+		node_t *ptr = n->chld;
+		while (ptr) {
+			if ((ptr->type & ROXML_NODE_TYPES) == ROXML_TXT_NODE) {
+				total += ptr->end - ptr->pos;
+			}
+			ptr = ptr->sibl;
+		}
+
+		if (content == NULL) {
+			content = roxml_malloc(sizeof(char), total + 1, PTR_CHAR);
+			bufsize = total + 1;
+		}
+		if (content == NULL) {
+			return NULL;
+		}
+
+		total = 0;
+		ptr = n->chld;
+		while (ptr) {
+			if ((ptr->type & ROXML_NODE_TYPES) == ROXML_TXT_NODE) {
+				int ret_len = 0;
+				int read_size = ptr->end - ptr->pos;
+
+				if (total + read_size > bufsize - 1) {
+					read_size = bufsize - total - 1;
+				}
+				ret_len += roxml_read(ptr->pos, read_size, content + total, ptr);
+
+				total += ret_len;
+			}
+			ptr = ptr->sibl;
+		}
+	} else {
+		node_t *target = n;
+		int read_size = 0;
+		int name_len = 0;
+		int spec_offset = 0;
+
+		ROXML_GET_BASE_BUFFER(name);
+
+		roxml_get_name(n, name, ROXML_BASE_LEN);
+		name_len = strlen(name);
+
+		ROXML_PUT_BASE_BUFFER(name);
+
+		if (n->type & ROXML_DOCTYPE_NODE) {
+			total = target->end - target->pos - name_len - 2;
+			spec_offset = target->pos + name_len + 2;
+		} else if (n->type & ROXML_TXT_NODE) {
+			total = target->end - target->pos;
+			spec_offset = target->pos;
+		} else if (n->type & ROXML_CMT_NODE) {
+			total = target->end - target->pos - 4;
+			spec_offset = target->pos + 4;
+		} else if (n->type & ROXML_PI_NODE) {
+			total = target->end - target->pos - name_len - 3;
+			spec_offset = target->pos + name_len + 3;
+		} else if (n->type & ROXML_ATTR_NODE) {
+			target = n->chld;
+			if (target) {
+				spec_offset = target->pos;
+				total = target->end - target->pos;
+			} else {
+				spec_offset = 0;
+				total = 0;
+			}
+		}
+
+		if (content == NULL) {
+			content = roxml_malloc(sizeof(char), total + 1, PTR_CHAR);
+			bufsize = total + 1;
+		}
+		if (content == NULL) {
+			return NULL;
+		}
+
+		read_size = total;
+		if (read_size > bufsize - 1) {
+			read_size = bufsize - 1;
+		}
+		total = roxml_read(spec_offset, read_size, content, target);
+	}
+
+	content[total] = '\0';
+	if (size) {
+		*size = total + 1;
+	}
+	return content;
+}
+
+char ROXML_API *roxml_get_name(node_t *n, char *buffer, int size)
+{
+	int offset = 0;
+
+	ROXML_GET_BASE_BUFFER(tmp_name);
+
+	memset(tmp_name, 0, ROXML_BASE_LEN * sizeof(char));
+
+	if (buffer) {
+		memset(buffer, 0, size * sizeof(char));
+	}
+
+	if (n == NULL) {
+		if (buffer) {
+			strcpy(buffer, "");
+		}
+		ROXML_PUT_BASE_BUFFER(tmp_name);
+		return buffer;
+	}
+
+	if (n->prnt == NULL) {
+		strcpy(tmp_name, "documentRoot");
+	} else if (n->type & ROXML_NS_NODE) {
+		roxml_ns_t *ns = (roxml_ns_t *) n->priv;
+		if (ns) {
+			strncpy(tmp_name, ns->alias, ROXML_BASE_LEN-1);
+		} else {
+			tmp_name[0] = '\0';
+		}
+	} else if ((n->type & ROXML_TXT_NODE) || (n->type & ROXML_CMT_NODE)) {
+		ROXML_PUT_BASE_BUFFER(tmp_name);
+		if (buffer) {
+			strcpy(buffer, "");
+			return buffer;
+		}
+		return NULL;
+	} else {
+		int count = 0;
+		int total = 0;
+		int spec_offset = 0;
+
+		if (n->type & ROXML_PI_NODE) {
+			spec_offset = 2;
+		} else if (n->type & ROXML_DOCTYPE_NODE) {
+			spec_offset = 1;
+		}
+
+		if ((total = roxml_read(n->pos + spec_offset, ROXML_BASE_LEN, tmp_name, n)) > 0) {
+			while (ROXML_WHITE(tmp_name[offset]) || tmp_name[offset] == '<') {
+				offset++;
+			}
+			count = offset;
+		} else {
+			count = 0;
+		}
+
+		if (n->type & ROXML_PI_NODE) {
+			for (; count < total; count++) {
+				if (ROXML_WHITE(tmp_name[count])) {
+					break;
+				} else if ((tmp_name[count] == '?') && (tmp_name[count + 1] == '>')) {
+					break;
+				}
+			}
+		} else if (n->type & ROXML_ELM_NODE) {
+			for (; count < total; count++) {
+				if (ROXML_WHITE(tmp_name[count])) {
+					break;
+				} else if ((tmp_name[count] == '/') && (tmp_name[count + 1] == '>')) {
+					break;
+				} else if (tmp_name[count] == '>') {
+					break;
+				}
+			}
+		} else if (n->type & ROXML_ATTR_NODE) {
+			for (; count < total; count++) {
+				if (ROXML_WHITE(tmp_name[count])) {
+					break;
+				} else if (tmp_name[count] == '=') {
+					break;
+				} else if (tmp_name[count] == '>') {
+					break;
+				} else if ((tmp_name[count] == '/') && (tmp_name[count + 1] == '>')) {
+					break;
+				}
+			}
+		} else if (n->type & ROXML_DOCTYPE_NODE) {
+			for (; count < total; count++) {
+				if (ROXML_WHITE(tmp_name[count])) {
+					break;
+				} else if (tmp_name[count] == '>') {
+					break;
+				}
+			}
+		}
+		tmp_name[count] = '\0';
+	}
+
+	if (buffer == NULL) {
+		buffer = (char *)roxml_malloc(sizeof(char), strlen(tmp_name) - offset + 1, PTR_CHAR);
+		strcpy(buffer, tmp_name + offset);
+	} else {
+		if (strlen(tmp_name) - offset < (unsigned int)size) {
+			size = strlen(tmp_name) - offset;
+		}
+		strncpy(buffer, tmp_name + offset, size);
+	}
+
+	ROXML_PUT_BASE_BUFFER(tmp_name);
+
+	return buffer;
+}
+
+void ROXML_API roxml_close(node_t *n)
+{
+	node_t *root = n;
+	if (root == NULL) {
+		return;
+	}
+	while (root->prnt != NULL) {
+		root = root->prnt;
+	}
+
+	roxml_del_tree(root->chld);
+	roxml_del_tree(root->sibl);
+	if ((root->type & ROXML_FILE) == ROXML_FILE) {
+		fclose(root->src.fil);
+	}
+	roxml_free_node(root);
+}
+
+int ROXML_API roxml_get_nodes_nb(node_t *n, int type)
+{
+	node_t *ptr = n;
+	int nb = -1;
+	if (n) {
+		nb = 0;
+		if (ptr->chld) {
+			ptr = ptr->chld;
+			do {
+				if (ptr->type & type) {
+					nb++;
+				}
+				ptr = ptr->sibl;
+			} while (ptr);
+		}
+		if (type & ROXML_ATTR_NODE) {
+			ptr = n->attr;
+			while (ptr) {
+				nb++;
+				ptr = ptr->sibl;
+			}
+		}
+	}
+	return nb;
+}
+
+node_t ROXML_API *roxml_get_nodes(node_t *n, int type, char *name, int nth)
+{
+	node_t *ptr = NULL;
+
+	if (n == NULL) {
+		return NULL;
+	}
+
+	if (name == NULL) {
+		int count = 0;
+		if (n->ns && (type & ROXML_NS_NODE)) {
+			ptr = n->ns;
+			if (nth == 0) {
+				return ptr;
+			}
+		} else if (n->attr && (type & ROXML_ATTR_NODE)) {
+			ptr = n->attr;
+			if (nth == 0) {
+				return ptr;
+			}
+			while ((ptr->sibl) && (nth > count)) {
+				ptr = ptr->sibl;
+				count++;
+			}
+		} else {
+			ptr = n->chld;
+			while (ptr && !((ptr->type & ROXML_NODE_TYPES) & type)) {
+				ptr = ptr->sibl;
+			}
+		}
+		if (nth > count) {
+			ptr = n->chld;
+			while (ptr && !((ptr->type & ROXML_NODE_TYPES) & type)) {
+				ptr = ptr->sibl;
+			}
+			while (ptr && (ptr->sibl) && (nth > count)) {
+				ptr = ptr->sibl;
+				if ((ptr->type & ROXML_NODE_TYPES) & type) {
+					count++;
+				}
+			}
+		}
+		if (nth > count) {
+			return NULL;
+		}
+	} else {
+		if (n->attr && (type & ROXML_ATTR_NODE)) {
+			ptr = n->attr;
+			while (ptr) {
+				int ans = strcmp(roxml_get_name(ptr, NULL, 0), name);
+				roxml_release(RELEASE_LAST);
+				if (ans == 0) {
+					return ptr;
+				}
+				ptr = ptr->sibl;
+			}
+		}
+		ptr = n->chld;
+		while (ptr) {
+			if ((ptr->type & ROXML_NODE_TYPES) & type) {
+				int ans = strcmp(roxml_get_name(ptr, NULL, 0), name);
+				roxml_release(RELEASE_LAST);
+				if (ans == 0) {
+					return ptr;
+				}
+			}
+			ptr = ptr->sibl;
+		}
+	}
+	return ptr;
+}
+
+node_t ROXML_API *roxml_set_ns(node_t *n, node_t * ns)
+{
+	node_t *attr = NULL;
+	node_t *chld = NULL;
+
+	if (!n) {
+		return NULL;
+	}
+
+	if (ns) {
+		node_t *common_parent = n;
+		while (common_parent && common_parent != ns->prnt) {
+			common_parent = common_parent->prnt;
+		}
+		if (common_parent != ns->prnt) {
+			return NULL;
+		}
+	}
+
+	n->ns = ns;
+	chld = n->chld;
+	while (chld) {
+		roxml_set_ns(chld, ns);
+		chld = chld->sibl;
+	}
+
+	attr = n->attr;
+	while (attr) {
+		if ((attr->type & ROXML_NS_NODE) == 0) {
+			attr->ns = ns;
+		}
+		attr = attr->sibl;
+	}
+
+	return n;
+}
+
+node_t ROXML_API *roxml_get_ns(node_t *n)
+{
+	return roxml_get_nodes(n, ROXML_NS_NODE, NULL, 0);
+}
+
+int ROXML_API roxml_get_pi_nb(node_t *n)
+{
+	return roxml_get_nodes_nb(n, ROXML_PI_NODE);
+}
+
+node_t ROXML_API *roxml_get_pi(node_t *n, int nth)
+{
+	return roxml_get_nodes(n, ROXML_PI_NODE, NULL, nth);
+}
+
+int ROXML_API roxml_get_cmt_nb(node_t *n)
+{
+	return roxml_get_nodes_nb(n, ROXML_CMT_NODE);
+}
+
+node_t ROXML_API *roxml_get_cmt(node_t *n, int nth)
+{
+	return roxml_get_nodes(n, ROXML_CMT_NODE, NULL, nth);
+}
+
+int ROXML_API roxml_get_txt_nb(node_t *n)
+{
+	return roxml_get_nodes_nb(n, ROXML_TXT_NODE);
+}
+
+node_t ROXML_API *roxml_get_txt(node_t *n, int nth)
+{
+	return roxml_get_nodes(n, ROXML_TXT_NODE, NULL, nth);
+}
+
+int ROXML_API roxml_get_attr_nb(node_t *n)
+{
+	return roxml_get_nodes_nb(n, ROXML_ATTR_NODE);
+}
+
+node_t ROXML_API *roxml_get_attr(node_t *n, char *name, int nth)
+{
+	return roxml_get_nodes(n, ROXML_ATTR_NODE, name, nth);
+}
+
+int ROXML_API roxml_get_chld_nb(node_t *n)
+{
+	return roxml_get_nodes_nb(n, ROXML_ELM_NODE);
+}
+
+node_t ROXML_API *roxml_get_chld(node_t *n, char *name, int nth)
+{
+	return roxml_get_nodes(n, ROXML_ELM_NODE, name, nth);
+}
+
+node_t ROXML_API *roxml_get_prev_sibling(node_t *n)
+{
+	node_t *prev = NULL;
+	node_t *prev_elm = NULL;
+
+	if (n && n->prnt) {
+		prev = n->prnt->chld;
+		while (prev && prev != n) {
+			if ((prev->type & ROXML_NODE_TYPES) == ROXML_ELM_NODE) {
+				prev_elm = prev;
+			}
+			prev = prev->sibl;
+		}
+	}
+	return prev_elm;
+}
+
+node_t ROXML_API *roxml_get_next_sibling(node_t *n)
+{
+	if (n) {
+		while (n->sibl && (n->sibl->type & ROXML_NODE_TYPES) != ROXML_ELM_NODE) {
+			n = n->sibl;
+		}
+		return n->sibl;
+	}
+	return NULL;
+}
+
+node_t ROXML_API *roxml_get_parent(node_t *n)
+{
+	if (n) {
+		if (n->prnt == NULL) {
+			return n;
+		} else {
+			return n->prnt;
+		}
+	}
+	return NULL;
+}
+
+node_t ROXML_API *roxml_get_root(node_t *n)
+{
+	node_t *root = NULL;
+	if (n) {
+		root = n;
+
+		while (root->prnt)
+			root = root->prnt;
+	}
+	return root;
+}
+
+int ROXML_API roxml_get_type(node_t *n)
+{
+	if (n) {
+		return (n->type & ROXML_NODE_TYPES);
+	}
+	return 0;
+}
+
+int ROXML_API roxml_get_node_position(node_t *n)
+{
+	int idx = 1;
+	char name[256];
+	node_t *prnt;
+	node_t *first;
+
+	if (n == NULL) {
+		return 0;
+	}
+
+	roxml_get_name(n, name, 256);
+
+	prnt = n->prnt;
+	if (!prnt) {
+		return 1;
+	}
+	first = prnt->chld;
+
+	while ((first) && (first != n)) {
+		char twin[256];
+		roxml_get_name(first, twin, 256);
+		if (strcmp(name, twin) == 0) {
+			idx++;
+		}
+		first = first->sibl;
+	}
+
+	return idx;
+}
+
+node_t ROXML_API *roxml_load_fd(int fd)
+{
+	FILE *file = NULL;
+	node_t *current_node = NULL;
+	if (fd < 0) {
+		return NULL;
+	}
+	file = fdopen(fd, "r");
+	if (file == NULL) {
+		return NULL;
+	}
+	current_node = roxml_create_node(0, file, ROXML_ELM_NODE | ROXML_FILE);
+	current_node = roxml_append_node(NULL, current_node);
+	return roxml_load(current_node, file, NULL);
+}
+
+node_t ROXML_API *roxml_load_doc(char *filename)
+{
+	node_t *current_node = NULL;
+	FILE *file = fopen(filename, "rb");
+	if (file == NULL) {
+		return NULL;
+	}
+	current_node = roxml_create_node(0, file, ROXML_ELM_NODE | ROXML_FILE);
+	current_node = roxml_append_node(NULL, current_node);
+	return roxml_load(current_node, file, NULL);
+}
+
+node_t ROXML_API *roxml_load_buf(char *buffer)
+{
+	node_t *current_node = NULL;
+	if (buffer == NULL) {
+		return NULL;
+	}
+	current_node = roxml_create_node(0, buffer, ROXML_ELM_NODE | ROXML_BUFF);
+	current_node = roxml_append_node(NULL, current_node);
+	return roxml_load(current_node, NULL, buffer);
+}
+
+node_t ROXML_API **roxml_xpath(node_t *n, char *path, int *nb_ans)
+{
+	int count = 0;
+	node_t **node_set = NULL;
+
+#if(CONFIG_XML_XPATH_ENGINE==1)
+
+	int index = 0;
+	xpath_node_t *xpath = NULL;
+	node_t *root = n;
+	char *full_path_to_find;
+
+	if (n == NULL) {
+		if (nb_ans) {
+			*nb_ans = 0;
+		}
+		return NULL;
+	}
+
+	root = roxml_get_root(n);
+
+	full_path_to_find = strdup(path);
+
+	index = roxml_parse_xpath(full_path_to_find, &xpath, 0);
+
+	if (index >= 0) {
+		node_set = roxml_exec_xpath(root, n, xpath, index, &count);
+
+		roxml_free_xpath(xpath, index);
+		free(full_path_to_find);
+
+		if (count == 0) {
+			roxml_release(node_set);
+			node_set = NULL;
+		}
+	}
+#endif /* CONFIG_XML_XPATH_ENGINE*/
+	if (nb_ans) {
+		*nb_ans = count;
+	}
+
+	return node_set;
+}
+
+void ROXML_API roxml_del_node(node_t *n)
+{
+#if(CONFIG_XML_READ_WRITE==1) 
+	if (n == NULL)
+		return;
+
+	if ((n->type & ROXML_ELM_NODE) ||
+	    (n->type & ROXML_DOCTYPE_NODE) || (n->type & ROXML_PI_NODE) || (n->type & ROXML_CMT_NODE)) {
+		roxml_del_std_node(n);
+	} else if (n->type & ROXML_ATTR_NODE) {
+		roxml_del_arg_node(n);
+	} else if (n->type & ROXML_TXT_NODE) {
+		roxml_del_txt_node(n);
+	}
+	roxml_free_node(n);
+#endif /* CONFIG_XML_READ_WRITE */
+}
+
+int ROXML_API roxml_commit_changes(node_t *n, char *dest, char **buffer, int human)
+{
+	int len = 0;
+
+#if(CONFIG_XML_COMMIT_XML_TREE==1)
+
+	int size = 0;
+
+	if (n) {
+		FILE *fout = NULL;
+
+		if (dest) {
+			fout = fopen(dest, "w");
+		} else if (buffer) {
+			*buffer = (char *)malloc(ROXML_BASE_LEN);
+			memset(*buffer, 0, ROXML_BASE_LEN);
+		}
+
+		if (fout || buffer) {
+			len = ROXML_BASE_LEN;
+
+			if ((n->prnt == NULL) || (n->prnt && n->prnt->prnt == NULL)) {
+				if (n->prnt) {
+					n = n->prnt->chld;
+				} else {
+					n = n->chld;
+				}
+				while (n) {
+					roxml_write_node(n, fout, buffer, human, 0, &size, &len);
+					n = n->sibl;
+				}
+			} else {
+				roxml_write_node(n, fout, buffer, human, 0, &size, &len);
+			}
+			if (buffer) {
+				char *ptr = NULL;
+				len -= ROXML_BASE_LEN;
+				ptr = *buffer + len;
+				len += strlen(ptr);
+			} else if (fout) {
+				len = ftell(fout);
+				fclose(fout);
+			}
+		}
+	}
+#endif /* CONFIG_XML_COMMIT_XML_TREE */
+
+	return len;
+}
+
+node_t ROXML_API *roxml_add_node(node_t *parent, int position, int type, char *name, char *value)
+{
+	node_t *new_node = NULL;
+
+#if(CONFIG_XML_READ_WRITE==1) 
+
+	int name_l = 0;
+	int end_node = 0;
+	int content_l = 0;
+	int content_pos = 0;
+	int end_content = 0;
+	char *buffer = NULL;
+
+	if (parent) {
+		if (parent->type & ROXML_ATTR_NODE) {
+			if (((type & ROXML_TXT_NODE) == 0) || (parent->chld)) {
+				return NULL;
+			}
+		} else if ((parent->type & ROXML_ELM_NODE) == 0) {
+			if (parent->prnt && (parent->prnt->type & ROXML_ELM_NODE)) {
+				parent = parent->prnt;
+			} else {
+				return NULL;
+			}
+		}
+	}
+
+	if (value) {
+		content_l = strlen(value);
+	}
+	if (name) {
+		name_l = strlen(name);
+	}
+
+	if (type & ROXML_ATTR_NODE) {
+		int xmlns_l = 0;
+		if (!name || !value) {
+			return NULL;
+		}
+		if (type & ROXML_NS_NODE) {
+			if (name_l > 0) {
+				xmlns_l = 6;
+			} else {
+				xmlns_l = 5;
+			}
+			buffer = (char *)malloc(sizeof(char) * (name_l + content_l + xmlns_l + 4));
+			sprintf(buffer, "xmlns%s%s=\"%s\"", name_l ? ":" : "", name, value);
+		} else {
+			buffer = (char *)malloc(sizeof(char) * (name_l + content_l + 4));
+			sprintf(buffer, "%s=\"%s\"", name, value);
+		}
+		content_pos = name_l + 2 + xmlns_l;
+		end_node = name_l + 1 + xmlns_l;
+		end_content = name_l + content_l + 2 + xmlns_l;
+	} else if (type & ROXML_CMT_NODE) {
+		if (!value) {
+			return NULL;
+		}
+		buffer = (char *)malloc(sizeof(char) * (content_l + 8));
+		sprintf(buffer, "<!--%s-->", value);
+		content_pos = 0;
+		end_node = content_l + 4;
+		end_content = content_l + 4;
+	} else if (type & ROXML_PI_NODE) {
+		if (!name) {
+			return NULL;
+		}
+		if (content_l) {
+			buffer = (char *)malloc(sizeof(char) * (name_l + content_l + 8));
+			sprintf(buffer, "<?%s %s?>", name, value);
+			end_node = name_l + content_l + 3;
+			end_content = name_l + content_l + 5;
+		} else {
+			buffer = (char *)malloc(sizeof(char) * (name_l + 7));
+			sprintf(buffer, "<?%s?>", name);
+			end_node = name_l + 2;
+			end_content = name_l + 4;
+		}
+		content_pos = 0;
+	} else if (type & ROXML_TXT_NODE) {
+		if (!value) {
+			return NULL;
+		}
+		buffer = (char *)malloc(sizeof(char) * (content_l + 1));
+		sprintf(buffer, "%s", value);
+		content_pos = 0;
+		end_node = content_l + 1;
+		end_content = content_l + 1;
+	} else if (type & ROXML_ELM_NODE) {
+		if (!name) {
+			return NULL;
+		}
+		if (value) {
+			buffer = (char *)malloc(sizeof(char) * (name_l * 2 + content_l + 6));
+			sprintf(buffer, "<%s>%s</%s>", name, value, name);
+			content_pos = name_l + 2;
+			end_node = name_l + content_l + 2;
+			end_content = end_node;
+		} else {
+			buffer = (char *)malloc(sizeof(char) * (name_l + 5));
+			sprintf(buffer, "<%s />", name);
+		}
+	} else {
+		return NULL;
+	}
+
+	new_node = roxml_create_node(0, buffer, type | ROXML_PENDING | ROXML_BUFF);
+	new_node->end = end_node;
+
+	if (type & ROXML_NS_NODE) {
+		roxml_ns_t *ns = calloc(1, sizeof(roxml_ns_t) + name_l + 1);
+		ns->id = ROXML_NS_ID;
+		ns->alias = (char *)ns + sizeof(roxml_ns_t);
+		if (name)
+			strcpy(ns->alias, name);
+		new_node->priv = ns;
+	}
+
+	if (((type & ROXML_ELM_NODE) && content_l) || (type & ROXML_ATTR_NODE)) {
+		node_t *new_txt = roxml_create_node(content_pos, buffer, ROXML_TXT_NODE | ROXML_PENDING | ROXML_BUFF);
+		roxml_append_node(new_node, new_txt);
+		new_txt->end = end_content;
+	}
+
+	if (parent == NULL) {
+		xpath_tok_table_t *table = (xpath_tok_table_t *) calloc(1, sizeof(xpath_tok_table_t));
+		parent = roxml_create_node(0, NULL, ROXML_ELM_NODE | ROXML_PENDING | ROXML_BUFF);
+		parent->end = 1;
+
+		table->id = ROXML_REQTABLE_ID;
+		table->ids[ROXML_REQTABLE_ID] = 1;
+
+		pthread_mutex_init(&table->mut, NULL);
+		parent->priv = (void *)table;
+
+		roxml_append_node(parent, new_node);
+	} else {
+		roxml_parent_node(parent, new_node, position);
+	}
+#endif /* CONFIG_XML_READ_WRITE */
+
+	return new_node;
+}
diff --git a/Libs/libroxml-2.3.0/src/roxml.h b/Libs/libroxml-2.3.0/src/roxml.h
new file mode 100644
index 0000000000000000000000000000000000000000..7d269d65a09254692d6508f68e32f6275f00b754
--- /dev/null
+++ b/Libs/libroxml-2.3.0/src/roxml.h
@@ -0,0 +1,1085 @@
+/** \file roxml.h
+ *  \brief header for libroxml.so
+ *         
+ * This is the header file used to develop some
+ * software using the libroxml.so library.
+ * \author blunderer <blunderer@blunderer.org>
+ * \date 23 Dec 2008
+ *
+ * Copyright (C) 2009 blunderer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ * The author added a static linking exception, see License.txt.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef ROXML_H
+#define ROXML_H
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/**
+ * \def ROXML_API
+ * 
+ * part of the public API
+ */
+#define ROXML_API
+
+#ifndef ROXML_INT
+/** \typedef node_t
+ *
+ * \brief node_t structure
+ * 
+ * This is the structure for a node. This struct is very
+ * little as it only contains offset for node in file and
+ * tree links
+ */
+typedef struct node node_t;
+#endif
+
+/**
+ * \def ROXML_ATTR_NODE
+ * 
+ * constant for attribute nodes
+ * \see roxml_add_node
+ */
+#define ROXML_ATTR_NODE	0x008
+
+/**
+ * \def ROXML_STD_NODE
+ * 
+ * \deprecated 
+ * constant for standard nodes
+ *
+ * \see roxml_add_node
+ * 
+ */
+#define ROXML_STD_NODE	0x010
+
+/**
+ * \def ROXML_ELM_NODE
+ * 
+ * constant for element nodes
+ * \see roxml_add_node
+ */
+#define ROXML_ELM_NODE	0x010
+
+/**
+ * \def ROXML_TXT_NODE
+ * 
+ * constant for text nodes
+ * \see roxml_add_node
+ */
+#define ROXML_TXT_NODE	0x020
+
+/**
+ * \def ROXML_CMT_NODE
+ * 
+ * constant for comment nodes
+ * \see roxml_add_node
+ */
+#define ROXML_CMT_NODE	0x040
+
+/**
+ * \def ROXML_PI_NODE
+ * 
+ * constant for processing_intruction nodes
+ * \see roxml_add_node
+ */
+#define ROXML_PI_NODE	0x080
+
+/**
+ * \def ROXML_NS_NODE
+ * 
+ * constant for namespace nodes
+ * \see roxml_add_node
+ */
+#define ROXML_NS_NODE	0x100
+
+/**
+ * \def ROXML_NSDEF_NODE
+ * 
+ * constant for namespace definition nodes
+ * \see roxml_add_node
+ */
+#define ROXML_NSDEF_NODE	(ROXML_NS_NODE | ROXML_ATTR_NODE)
+
+/**
+ * \def ROXML_CDATA_NODE
+ * 
+ * constant for cdata nodes
+ * \see roxml_add_node
+ */
+#define ROXML_CDATA_NODE	(ROXML_TXT_NODE | 0x200)
+
+/**
+ * \def ROXML_DOCTYPE_NODE
+ * 
+ * constant for doctype nodes
+ * \see roxml_add_node
+ */
+#define ROXML_DOCTYPE_NODE	0x400
+
+/**
+ * \def ROXML_ALL_NODES
+ * 
+ * constant for all types of nodes
+ * \see roxml_add_node
+ */
+#define ROXML_ALL_NODES	(ROXML_PI_NODE | ROXML_CMT_NODE | ROXML_TXT_NODE | ROXML_ATTR_NODE | ROXML_ELM_NODE)
+
+/**
+ * \def ROXML_ALL_NODE
+ * 
+ * constant for all types of nodes for backward compatibility
+ * \see roxml_add_node
+ */
+#define ROXML_ALL_NODE	ROXML_ALL_NODES
+
+/**
+ * \def ROXML_NODE_TYPES
+ * 
+ * constant for all nodes types
+ * \see roxml_get_types
+ */
+#define ROXML_NODE_TYPES	0x05f8
+
+/**
+ * \def RELEASE_ALL
+ * 
+ * when used with roxml_release, release all memory allocated by current thread
+ * \see roxml_release
+ */
+#define RELEASE_ALL	(void*)-1
+
+/**
+ * \def RELEASE_LAST
+ * 
+ * when used with roxml_release, release last variable allocated
+ * \see roxml_release
+ *
+ * example:
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ * int main(void)
+ * {
+ *	int len;
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ *	
+ *	// roxml_get_content allocate a buffer and store the content in it if no buffer was given
+ *	printf("root content = '%s'\n", roxml_get_content(root, NULL, 0, &len));
+ *
+ *	// release the last allocated buffer even if no pointer is maintained by the user
+ *	roxml_release(RELEASE_LAST);
+ *
+ *	// here no memory leak can occur.
+ *
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ */
+#define RELEASE_LAST	(void*)-2
+
+/** \brief load function for buffers
+ *
+ * \fn node_t* ROXML_API roxml_load_buf(char *buffer);
+ * This function load a document by parsing all the corresponding nodes.
+ * The document must be contained inside the char * buffer given in parameter
+ * and remain valid until the roxml_close() function is called
+ * \param buffer the XML buffer to load
+ * \return the root node or NULL
+ * \see roxml_close
+ * \see roxml_load_fd
+ * \see roxml_load_doc
+ */
+node_t *ROXML_API roxml_load_buf(char *buffer);
+
+/** \brief load function for files
+ *
+ * \fn node_t* ROXML_API roxml_load_doc(char *filename);
+ * This function load a file document by parsing all the corresponding nodes
+ * \warning the file is not fully copied and thus, it should stay untouched until roxml_close is called on the corresponding XML tree.
+ * \param filename the XML document to load
+ * \return the root node or NULL
+ * \see roxml_close
+ * \see roxml_load_fd
+ * \see roxml_load_buf
+ */
+node_t *ROXML_API roxml_load_doc(char *filename);
+
+/** \brief load function for file descriptors
+ *
+ * \fn node_t* ROXML_API roxml_load_fd(int fd);
+ * This function load a document by parsing all the corresponding nodes
+ * \param fd the opened fiel descriptor to XML document to load
+ * \return the root node or NULL
+ * \see roxml_close
+ * \see roxml_load_doc
+ * \see roxml_load_buf
+ */
+node_t *ROXML_API roxml_load_fd(int fd);
+
+/** \brief unload function
+ *
+ * \fn void ROXML_API roxml_close(node_t *n);
+ * This function clear a document and all the corresponding nodes
+ * It release all memory allocated during roxml_load_doc or roxml_load_file or roxml_add_node.
+ * All nodes from the tree are not available anymore.
+ * \param n is any node of the tree to be cleaned
+ * \return void
+ * \see roxml_load_doc
+ * \see roxml_load_buf
+ * \see roxml_add_node
+ */
+void ROXML_API roxml_close(node_t *n);
+
+/** \brief next sibling getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_next_sibling(node_t *n);
+ * This function returns the next sibling of a given node
+ * \param n is one node of the tree
+ * \return the next sibling node
+ */
+node_t *ROXML_API roxml_get_next_sibling(node_t *n);
+
+/** \brief prev sibling getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_prev_sibling(node_t *n);
+ * This function returns the prev sibling of a given node
+ * \param n is one node of the tree
+ * \return the prev sibling node
+ */
+node_t *ROXML_API roxml_get_prev_sibling(node_t *n);
+
+/** \brief parent getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_parent(node_t *n);
+ * This function returns the parent of a given node
+ * \param n is one node of the tree
+ * \return the parent node
+ */
+node_t *ROXML_API roxml_get_parent(node_t *n);
+
+/** \brief root getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_root(node_t *n);
+ * This function returns the root of a tree containing the given node
+ * The root is defined as a virtual node that contains all first rank nodes if document is
+ * not a valid xml document:
+ * \verbatim
+<data1>
+ <item/>
+ <item/>
+</data1>
+<data2>
+ <item/>
+ <item/>
+</data2>
+\endverbatim
+ * will be processed successfully and the root node will have 2 children: data1 and data2
+ *
+ * if document was:
+ * \verbatim
+<?xml version="1.0">
+<doc>
+ <data1>
+  <item/>
+  <item/>
+ </data1>
+ <data2>
+  <item/>
+  <item/>
+ </data2>
+</doc>
+\endverbatim
+ * In this case, the node "doc" will be the root, and will contain 2 children: data1 and data2
+ *
+ * For a document to be valid, following conditions must be met:
+ * <ul>
+ * <li>the first node is a processing instruction with the string "xml" as target application.</li>
+ * <li>there is only one ELM node containing all document (but there may be several process-instructions or comments)</li>
+ * </ul>
+ * \param n is one node of the tree
+ * \return the root node
+ */
+node_t *ROXML_API roxml_get_root(node_t *n);
+
+/** \brief namespace getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_ns(node_t *n);
+ * This function returns the namespace of a node
+ *
+ * \param n is one node of the tree
+ * \return the namespace or NULL if none are set for this node
+ * \see roxml_add_node
+ * \see roxml_set_ns
+ * \see roxml_get_nodes
+ *
+ * example:
+ * given the following xml file
+ * \verbatim
+<xml xmlns:test="http://www.test.org">
+ <test:item1 test:value1="3"/>
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ * 
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ * 	node_t *xml =  roxml_get_chld(root, NULL,  0);
+ *	node_t *nsdef = roxml_get_attr(xml, NULL, 0);
+ * 	node_t *node1 = roxml_get_chld(xml, NULL, 0);
+ * 	node_t *attr1 = roxml_get_attr(node1, NULL, 0);
+ * 	node_t *node1_ns = roxml_get_ns(node1);
+ * 	node_t *attr1_ns = roxml_get_ns(attr1);
+ *
+ * 	// here node1_ns and attr1_ns are the "test:" namespace
+ * 	if(node1_ns == nsdef) {
+ * 		printf("got the correct namespace node for elem\n");
+ *	}
+ * 	if(attr1_ns == nsdef) {
+ * 		printf("got the correct namespace node for attr\n");
+ *	}
+ * 	if(strcmp(roxml_get_name(node1_ns, NULL, 0), "test") == 0) {
+ * 		printf("got the correct namespace alias\n");
+ * 	}
+ * 	if(strcmp(roxml_get_content(node1_ns, NULL, 0, NULL), "http://www.test.org") == 0) {
+ * 		printf("got the correct namespace\n");
+ * 	}
+ * 
+ * 	roxml_close(root);
+ * 	return 0;
+ * }
+ * 
+ * \endcode
+ */
+node_t *ROXML_API roxml_get_ns(node_t *n);
+
+/** \brief namespace setter function
+ *
+ * \fn node_t* ROXML_API roxml_set_ns(node_t *n, node_t *ns);
+ * This function set the namespace of a node to the given namespace definition.
+ * The namespace must be previously defined in the xml tree in an ancestor of node n.
+ *
+ * \param n is one node of the tree
+ * \param ns is one nsdef node of the tree
+ * \return the node or NULL if ns cannot be set
+ * \see roxml_add_node
+ * \see roxml_get_ns
+ * \see roxml_get_nodes
+ *
+ * \warning: Setting a namespace to a node is recursif:
+ * - it will update all element and attribute that are descendant from current node
+ * - namespace will be applied to all new node added as descendant as current node
+ */
+node_t *ROXML_API roxml_set_ns(node_t *n, node_t * ns);
+
+/** \brief comment getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_cmt(node_t *n, int nth);
+ * This function returns the nth comment of a node
+ *
+ * \param n is one node of the tree
+ * \param nth is the id of the cmt to get
+ * \return the comment corresponding to id
+ * \see roxml_get_cmt_nb
+ * \see roxml_get_nodes
+ *
+ * example:
+ * given the following xml file
+ * \verbatim
+<xml>
+ <item1/>
+ <!--comment1-->
+ <!--comment2-->
+ <item2/>
+ <item3/>
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ * 
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ * 	node_t *xml =  roxml_get_chld(root, NULL,  0);
+ * 	node_t *cmt1 = roxml_get_cmt(xml, 0);
+ * 	node_t *cmt2 = roxml_get_cmt(xml, 1);
+ * 
+ * 	// here cmt1 is the "comment1" node
+ * 	if(strcmp(roxml_get_content(cmt1, NULL, 0, NULL), "comment1") == 0) {
+ * 		printf("got the first comment\n");
+ * 	}
+ * 	// and cmt2 is the "comment2" node
+ * 	if(strcmp(roxml_get_content(cmt2, NULL, 0, NULL), "comment2") == 0) {
+ * 		printf("got the second comment\n");
+ * 	}
+ * 
+ * 	roxml_close(root);
+ * 	return 0;
+ * }
+ * 
+ * \endcode
+ */
+node_t *ROXML_API roxml_get_cmt(node_t *n, int nth);
+
+/** \brief comments number getter function
+ *
+ * \fn int ROXML_API roxml_get_cmt_nb(node_t *n);
+ * This function return the number of comments for a given node
+ * \param n is one node of the tree
+ * \return the number of comments
+ * \see roxml_get_cmt_nb
+ * \see roxml_get_nodes
+ */
+int ROXML_API roxml_get_cmt_nb(node_t *n);
+
+/** \brief chld getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_chld(node_t *n, char * name, int nth);
+ * This function returns a given chld of a node etheir by name, or the nth child.
+ *
+ * \param n is one node of the tree
+ * \param name is the name of the child to get
+ * \param nth is the id of the chld to get
+ * \return the chld corresponding to name or id (if both are set, name is used)
+ * \see roxml_get_chld_nb
+ *
+ * example:
+ * given the following xml file
+ * \verbatim
+<xml>
+ <item1/>
+ <item2/>
+ <item3/>
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ *	
+ *	node_t *child_by_name = roxml_get_chld(root, "item2", 0);
+ *	node_t *child_by_nth = roxml_get_chld(root, NULL, 2);
+ *
+ *	// here child_by_name == child_by_nth
+ *	if(child_by_name == child_by_nth) {
+ *		printf("Nodes are equal\n");
+ *	} 
+ *
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ */
+node_t *ROXML_API roxml_get_chld(node_t *n, char *name, int nth);
+
+/** \brief chlds number getter function
+ *
+ * \fn int ROXML_API roxml_get_chld_nb(node_t *n);
+ * This function return the number of chlidren for a given node
+ * \param n is one node of the tree
+ * \return  the number of chlildren
+ */
+int ROXML_API roxml_get_chld_nb(node_t *n);
+
+/** \brief process-instruction getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_pi(node_t *n, int nth);
+ * This function returns the nth process-instruction of a node.
+ *
+ * \param n is one node of the tree
+ * \param nth is the id of the pi to get
+ * \return the process-instruction corresponding to id
+ * \see roxml_get_pi_nb
+ * \see roxml_get_nodes
+ *
+ * example:
+ * given the following xml file
+ * \verbatim
+<xml>
+ <item1/>
+ <?test value="2"?>
+ <?test param="3"?>
+ <item2/>
+ <item3/>
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ * 
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ * 	node_t *xml =  roxml_get_chld(root, NULL,  0);
+ * 	node_t *pi1 = roxml_get_pi(xml, 0);
+ * 	node_t *pi2 = roxml_get_pi(xml, 1);
+ * 
+ * 	// here pi1 is the <?value="2"?> node
+ * 	if(strcmp(roxml_get_content(pi1, NULL, 0, NULL), "value=\"2\"") == 0) {
+ * 		printf("got the first process-instruction\n");
+ * 	}
+ * 	// and pi2 is the <?param="3"?> node
+ * 	if(strcmp(roxml_get_content(pi2, NULL, 0, NULL), "param=\"3\"") == 0) {
+ * 		printf("got the second process-instruction\n");
+ * 	}
+ * 
+ * 	roxml_close(root);
+ * 	return 0;
+ * }
+ * 
+ * \endcode
+ */
+node_t *ROXML_API roxml_get_pi(node_t *n, int nth);
+
+/** \brief process-instruction number getter function
+ *
+ * \fn int ROXML_API roxml_get_pi_nb(node_t *n);
+ * This function return the number of process-instruction in a given node
+ * \param n is one node of the tree
+ * \return  the number of process-instructions 
+ * \see roxml_get_pi
+ * \see roxml_get_nodes_nb
+ */
+int ROXML_API roxml_get_pi_nb(node_t *n);
+
+/** \brief name getter function
+ *
+ * \fn char* ROXML_API roxml_get_name(node_t *n, char * buffer, int size);
+ * This function return the name of the node or fill the current buffer with it if not NULL.
+ * if name is NULL, the function will allocate a buffer that user should free using
+ * roxml_release when no longer needed.
+ * depending on node type it will return:
+ * <ul>
+ * <li> ROXML_ELM_NODE: returns the node name</li>
+ * <li> ROXML_ATTR_NODE: returns the attribute name</li>
+ * <li> ROXML_PI_NODE: returns the process-instruction targeted application</li>
+ * <li> ROXML_TXT_NODE: returns NULL (or empty string if you provided a buffer in buffer param)</li>
+ * <li> ROXML_CMT_NODE: returns NULL (or empty string if you provided a buffer in buffer param)</li>
+ * <li> ROXML_NS_NODE: returns the namespace alias associated with the ns node </li>
+ * </ul>
+ * Be carreful as if your buffer is too short for the returned string, it will be truncated
+ * \param n is one node of the tree
+ * \param buffer a buffer pointer or NULL if has to be auto allocated
+ * \param size the size of buffer pointed by buffer if not NULL
+ * \return the name of the node (return our buffer pointer if it wasn't NULL)
+ * \see roxml_release
+ */
+char *ROXML_API roxml_get_name(node_t *n, char *buffer, int size);
+
+/** \brief content getter function
+ *
+ * \fn char * ROXML_API roxml_get_content(node_t *n, char * buffer, int bufsize, int * size);
+ *
+ * This function returns the content of a node.;
+ * if the returned pointer is NULL then the node either has no content or this function is irrelevant for this kind of node.
+ * depending on node type it will return:
+ * <ul>
+ * <li> ROXML_ELM_NODE: returns the concatenation of all direct text node children</li>
+ * <li> ROXML_ATTR_NODE: returns the attribute value</li>
+ * <li> ROXML_PI_NODE: returns the process-instruction instruction</li>
+ * <li> ROXML_TXT_NODE: returns the text content of the node</li>
+ * <li> ROXML_CMT_NODE: returns the text content of the comment</li>
+ * <li> ROXML_NS_NODE: returns the namespace definition (usually an URL)</li>
+ * </ul>
+ * returned string should be freed using roxml_release when not used anymore
+ * \param n is one node of the tree
+ * \param buffer is the buffer where result will be written or NULL for internal allocation
+ * \param bufsize the size if using custom buffer
+ * \param size the actual size of copied result. returned size should be less that buffer size since roxml_get_content
+ * will add the \0. if buffer was not NULL and size == buf_size, then given buffer was too small and node content was truncated
+ * \return the text content
+ * \see roxml_release
+ */
+char *ROXML_API roxml_get_content(node_t *n, char *buffer, int bufsize, int *size);
+
+/** \brief number of nodes getter function
+ *
+ * \fn int ROXML_API roxml_get_nodes_nb(node_t *n, int type);
+ * 
+ * This function returns the number of nodes matching type flag contained in a given node
+ * all other roxml_get_*_nb are wrapper to this
+ * \param n is one node of the tree
+ * \param type is the bitmask of node types we want to consider
+ * \return the number of nodes
+ * \see roxml_get_attr_nb
+ * \see roxml_get_chld_nb
+ * \see roxml_get_txt_nb
+ * \see roxml_get_cmt_nb
+ * \see roxml_get_pi_nb
+ *
+ * example:
+ * given the following xml file
+ * \verbatim
+<xml>
+ <!-- comment -->
+ <?value="2"?>
+ <product id="42" class="item"/>
+ <product id="43" class="item"/>
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ *
+ *	int all_nodes_1 = roxml_get_nodes_nb(root, ROXML_ELM_NODE | ROXML_CMT_NODE | ROXML_PI_NODE | ROXML_TXT_NODE | ROXML_ATTR_NODE);
+ *	int all_nodes_2 = roxml_get_nodes_nb(root, ROXML_ALL_NODES);
+ *
+ * 	// here all_nodes_1 == all_nodes_2
+ * 	if(all_nodes_1 == all_nodes_2) {
+ * 		printf("%d Nodes are contained in root\n", all_nodes_1);
+ * 	}
+ *
+ *	// let's count elm node (== children)
+ *	int elm_nodes1 = roxml_get_nodes_nb(root, ROXML_ELM_NODE);
+ *	int elm_nodes2 = roxml_get_chld_nb(root);
+ *	// here elm_nodes1 == elm_nodes2 == 2
+ *	if(elm_nodes1 == elm_nodes2) {
+ *		printf("%d ELM Nodes are contained in root\n", elm_nodes_1);
+ *	}
+ *
+ *	// we can also count all node except elm nodes, doing:
+ *	int almost_all_nodes = roxml_get_nodes_nb(root, ROXML_ALL_NODES & ~ROXML_ELM_NODE);
+ *	// here almost_all_nodes = 2 since we have one comment node and one processing-instruction node
+ *	if(almost_all_nodes == 2) {
+ *		printf("%d non ELM Nodes are contained in root\n", almost_all_nodes_1);
+ *	}
+ *
+ * 	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ */
+int ROXML_API roxml_get_nodes_nb(node_t *n, int type);
+
+/** \brief nodes getter function
+ *
+ * \fn char* ROXML_API roxml_get_nodes(node_t *n, int type, char * name, int nth);
+ * This function get the nth node matching type contained in a node, or the first node named name.
+ * All other roxml_get_* are wrapper to this function.
+ * When asking for several node type (let say ROXML_ALL_NODES), all ROXML_ATTR_NODE will be 
+ * placed first, then, all other nodes will come mixed, depending on xml document order.
+ * 
+ * \param n is one node of the tree
+ * \param type is the bitmask of node types we want to consider
+ * \param name is the name of the child to get. This parameter is only relevant for node with types: \ref ROXML_ELM_NODE, \ref ROXML_ATTR_NODE, \ref ROXML_PI_NODE
+ * \param nth the id of attribute to read
+ * \return the node corresponding to name or id (if both are set, name is used)
+ * \see roxml_get_attr
+ * \see roxml_get_chld
+ * \see roxml_get_txt
+ * \see roxml_get_cmt
+ * \see roxml_get_pi
+ */
+node_t *ROXML_API roxml_get_nodes(node_t *n, int type, char *name, int nth);
+
+/** \brief number of attribute getter function
+ *
+ * \fn int ROXML_API roxml_get_attr_nb(node_t *n);
+ * 
+ * This function returns the number of attributes for a given node
+ * \param n is one node of the tree
+ * \return the number of attributes in node
+ */
+int ROXML_API roxml_get_attr_nb(node_t *n);
+
+/** \brief attribute getter function
+ *
+ * \fn node_t* ROXML_API roxml_get_attr(node_t *n, char * name, int nth);
+ * This function get the nth attribute of a node.
+ * \param n is one node of the tree
+ * \param name is the name of the attribute to get
+ * \param nth the id of attribute to read
+ * \return the attribute corresponding to name or id (if both are set, name is used)
+ *
+ * example:
+ * given the following xml file
+ * \verbatim
+<xml>
+ <product id="42" class="item"/>
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ * 	node_t *item1 = roxml_get_chld(root, NULL, 0);
+ * 	node_t *item2 = roxml_get_chld(item1, NULL, 0);
+ *
+ * 	node_t *attr_by_name = roxml_get_attr(item2, "id", 0);
+ * 	node_t *attr_by_nth = roxml_get_attr(item2, NULL, 0);
+ *
+ * 	// here attr_by_name == attr_by_nth
+ * 	if(attr_by_name == attr_by_nth) {
+ * 		printf("Nodes are equal\n");
+ * 	}
+ *
+ * 	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ */
+node_t *ROXML_API roxml_get_attr(node_t *n, char *name, int nth);
+
+/** \brief exec path function
+ *
+ * \fn roxml_xpath(node_t *n, char * path, int *nb_ans);
+ * This function return a node set (table of nodes) corresponding to a given xpath.
+ * resulting node set should be roxml_release when not used anymore (but not individual nodes)
+ * \param n is one node of the tree 
+ * \param path the xpath to use
+ * \param nb_ans the number of results
+ * \return the node table or NULL 
+ *
+ * handled xpath are described in \ref xpath
+ */
+node_t **ROXML_API roxml_xpath(node_t *n, char *path, int *nb_ans);
+
+/** \brief node type function
+ *
+ * \fn roxml_get_type(node_t *n);
+ * This function tells if a node is an \ref ROXML_ATTR_NODE, \ref ROXML_TXT_NODE, \ref ROXML_PI_NODE, \ref ROXML_CMT_NODE or \ref ROXML_ELM_NODE.
+ * Warning: ROXML_CDATA_NODE are special. They return a type as ROXML_TXT_NODE.
+ * \param n is the node to test
+ * \return the node type
+ */
+int ROXML_API roxml_get_type(node_t *n);
+
+/** \brief node get position function
+ *
+ * \fn roxml_get_node_position(node_t *n);
+ * This function tells the index of a node between all its siblings homonyns.
+ * \param n is the node to test
+ * \return the postion between 1 and N
+ */
+int ROXML_API roxml_get_node_position(node_t *n);
+
+/** \brief memory cleanning function
+ *
+ * \fn roxml_release(void * data);
+ * This function release the memory pointed by pointer
+ * just like free would but for memory allocated with roxml_malloc. 
+ * Freeing a NULL pointer won't do
+ * anything. roxml_release also allow you to remove all 
+ * previously allocated memory by using \ref RELEASE_ALL as argument.
+ * You can also safely use \ref RELEASE_LAST argument that will release the 
+ * previously allocated varable within the current thread (making this
+ * function thread safe).
+ * if using roxml_release on a variable non roxml_mallocated, nothing will happen (ie variable won't be freed)
+ * \param data the pointer to delete or NULL or \ref RELEASE_ALL or \ref RELEASE_LAST
+ * \return void
+ */
+void ROXML_API roxml_release(void *data);
+
+/** \brief add a node to the tree
+ *
+ * \fn roxml_add_node(node_t *parent, int position, int type, char *name, char *value);
+ * this function add a new node to the tree. This will not update de buffer or file,
+ * only the RAM loaded tree. One should call \ref roxml_commit_changes to save modifications.
+ * If the parent node is an \ref ROXML_ELM_NODE, then, new node will be added as a child. Else
+ * the node will be added as a sibling of the parent node. In the later case, position parameter describes
+ * the position in the sibling list, instead of position in the children list.
+ * \param parent the parent node
+ * \param position the position as a child of parent 1 is the first child, 0 for auto position at the end of children list...
+ * \param type the type of node between \ref ROXML_ATTR_NODE, \ref ROXML_ELM_NODE, \ref ROXML_TXT_NODE, \ref ROXML_CDATA_NODE, \ref ROXML_PI_NODE, \ref ROXML_CMT_NODE, \ref ROXML_NSDEF_NODE, \ref ROXML_NS_NODE.
+ * \param name the name of the node (mandatory for \ref ROXML_ATTR_NODE and \ref ROXML_ELM_NODE and \ref ROXML_PI_NODE and \ref ROXML_NSDEF_NODE and \ref ROXML_NS_NODE only)
+ * \param value the text content (mandatory for \ref ROXML_TXT_NODE, \ref ROXML_CDATA_NODE, \ref ROXML_CMT_NODE, \ref ROXML_ATTR_NODE and \ref ROXML_NSDEF_NODE optional for \ref ROXML_ELM_NODE, \ref ROXML_PI_NODE). The text content for an attribute is the attribute value
+ * \return the newly created node
+ * \see roxml_commit_changes
+ * \see roxml_del_node
+ * \see roxml_close
+ *
+ * paramaters name and value depending on node type:
+ * - \ref ROXML_ELM_NODE take at least a node name. the parameter value is optional and represents the text content.
+ * - \ref ROXML_TXT_NODE ignore the node name. the parameter value represents the text content.
+ * - \ref ROXML_CDATA_NODE ignore the node name. the parameter value represents the text content that will be encapsulated in CDATA tags.
+ * - \ref ROXML_CMT_NODE ignore the node name. the parameter value represents the comment.
+ * - \ref ROXML_PI_NODE take the node name as process-instruction target. the parameter value represents the content of processing-instruction.
+ * - \ref ROXML_ATTR_NODE take an attribute name. and the attribute value as given by parameter value.
+ * - \ref ROXML_NSDEF_NODE take an attribute name (empty string for default namespace). and the namespace value as given by parameter value.
+ * - \ref ROXML_NS_NODE take an attribute name (empty string for default namespace). 
+ * 
+ * some examples to obtain this xml result file
+\verbatim
+<root>
+ <!-- sample XML file -->
+ <item id="42">
+  <price> 
+   24 
+  </price>
+ </item>
+</root>
+\endverbatim
+ *
+ * \code
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_add_node(NULL, 0, ROXML_ELM_NODE, "xml", NULL);
+ * 	node_t *tmp = roxml_add_node(root, 0, ROXML_CMT_NODE, NULL, "sample XML file");
+ * 	tmp = roxml_add_node(root, 0, ROXML_ELM_NODE, "item", NULL);
+ * 	roxml_add_node(tmp, 0, ROXML_ATTR_NODE, "id", "42");
+ * 	tmp = roxml_add_node(tmp, 0, ROXML_ELM_NODE, "price", "24");
+ * 	roxml_commit_changes(root, "/tmp/test.xml", NULL, 1);
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ * Or also:
+ * \code
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_add_node(NULL, 0, ROXML_ELM_NODE, "xml", NULL);
+ * 	node_t *tmp = roxml_add_node(root, 0, ROXML_CMT_NODE, NULL, "sample XML file");
+ * 	tmp = roxml_add_node(root, 0, ROXML_ELM_NODE, "item", NULL);
+ * 	roxml_add_node(tmp, 0, ROXML_ATTR_NODE, "id", "42");
+ * 	tmp = roxml_add_node(tmp, 0, ROXML_ELM_NODE, "price", NULL);
+ * 	tmp = roxml_add_node(tmp, 0, ROXML_TXT_NODE, NULL, "24");
+ * 	roxml_commit_changes(root, "/tmp/test.xml", NULL, 1);
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ *
+ * If you need a valid XML doc, just start by adding a corresponding process-instruction.
+ * Example, to obtain this xml file:
+ * \verbatim
+<?xml version="1.0" encoding="UTF-8"?>
+<!--sample file-->
+<doc>
+ basic content
+ <item/>
+ <item/>
+ <item/>
+</doc>
+\endverbatim
+ * \code
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ *	node_t *root = roxml_add_node(NULL, 0, ROXML_PI_NODE, "xml", "version=\"1.0\" encoding=\"UTF-8\"");
+ *	node_t *node = roxml_add_node(root, 0, ROXML_CMT_NODE, NULL, "sample file");
+ *	node = roxml_add_node(root, 0, ROXML_ELM_NODE, "doc", "basic content");
+ *	roxml_add_node(node, 0, ROXML_ELM_NODE, "item", NULL);
+ *	roxml_add_node(node, 0, ROXML_ELM_NODE, "item", NULL);
+ *	roxml_add_node(node, 0, ROXML_ELM_NODE, "item", NULL);
+ * 	roxml_commit_changes(root, "/tmp/test.xml", NULL, 1);
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ */
+node_t *ROXML_API roxml_add_node(node_t *parent, int position, int type, char *name, char *value);
+
+/** \brief text node getter function
+ *
+ * \fn roxml_get_txt(node_t *n, int nth);
+ * this function return the text content of a node as a \ref ROXML_TXT_NODE
+ * the content of the text node can be read using the roxml_get_content function
+ * \param n the node that contains text
+ * \param nth the nth text node to retrieve
+ * \return the text node or NULL
+ * \see roxml_get_txt_nb
+ * \see roxml_get_nodes
+ * \see roxml_get_content
+ *
+ * example:
+ * given this xml file:
+ * \verbatim
+<xml>
+  This is
+  <item/>
+  an example
+  <item/>
+  of text nodes
+</xml>
+\endverbatim
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ *	int len;
+ *	node_t *root = roxml_load_doc("/tmp/doc.xml");
+ *	node_t *item = roxml_get_chld(root, NULL, 0);
+ *
+ *	node_t *text = roxml_get_txt(item, 0);
+ *	char * text_content = roxml_get_content(text, NULL, 0, &len);
+ *	// HERE text_content is equal to "This is"
+ *	printf("text_content = '%s'\n", text_content);
+ *
+ *	text = roxml_get_txt(item, 1);
+ *	text_content = roxml_get_content(text, NULL, 0, &len);
+ *	// HERE text_content is equal to "an example"
+ *	printf("text_content = '%s'\n", text_content);
+ *
+ *	text = roxml_get_txt(item, 2);
+ *	text_content = roxml_get_content(text, NULL, 0, &len);
+ *	// HERE text_content is equal to "of text nodes"
+ *	printf("text_content = '%s'\n", text_content);
+ *
+ *	roxml_close(item);
+ *	return 0;
+ * }
+ * \endcode
+ */
+node_t *ROXML_API roxml_get_txt(node_t *n, int nth);
+
+/** \brief text node number getter function
+ *
+ * \fn roxml_get_txt_nb(node_t *n);
+ * this function return the number of text nodes in 
+ * a standard node
+ * \param n the node to search into
+ * \return the number of text node
+ * \see roxml_get_txt
+ */
+int ROXML_API roxml_get_txt_nb(node_t *n);
+
+/** \brief node deletion function
+ *
+ * \fn roxml_del_node(node_t *n);
+ * this function delete a node from the tree. The node is not really deleted 
+ * from the file or buffer until the roxml_commit_changes is called, but it won't be
+ * visible anymore in the XML tree.
+ * \param n the node to delete
+ * \return 
+ * \see roxml_add_node
+ * \see roxml_commit_changes
+ *
+ * \warning when removing a nsdef node, all node using this namespace will be updated and inherit their parent namespace
+ */
+void ROXML_API roxml_del_node(node_t *n);
+
+/** \brief sync function
+ *
+ * \fn roxml_commit_changes(node_t *n, char * dest, char ** buffer, int human);
+ * this function sync changes from the RAM tree to the given buffer or file in human or one-line format 
+ * The tree will be processed starting with the root node 'n' and following with all its children or if n is the root, all its siblings and children.
+ * The tree will be dumped to a file if 'dest' is not null and contains a valid path.
+ * The tree will be dumped to a buffer if 'buffer' is not null. the buffer is allocated by the library
+ * and a pointer to it will be stored into 'buffer'. The allocated buffer can be freed usinf free()
+ * \warning in the case of a tree loaded using roxml_load_doc, the roxml_commit_changes cannot be done to that same file
+ * since it may override datas it need. This usually result in a new file filled with garbages. The solution is to write it to a temporary file and rename it after roxml_close the current tree.
+ *
+ * \param n the root node of the tree to write
+ * \param dest the path to a file to write tree to
+ * \param buffer the address of a buffer where the tree will be written. This buffer have to be freed after use
+ * \param human 0 for one-line tree, or 1 for human format (using tabs, newlines...)
+ * \return the number of bytes written to file or buffer 
+ * 
+ * One should do:
+ * \code
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_add_node(NULL, 0, ROXML_ELM_NODE, "xml", NULL);
+ * 	node_t *tmp = roxml_add_node(root, 0, ROXML_CMT_NODE, NULL, "sample XML file");
+ * 	tmp = roxml_add_node(root, 0, ROXML_ELM_NODE, "item", NULL);
+ * 	roxml_add_node(tmp, 0, ROXML_ATTR_NODE, "id", "42");
+ * 	tmp = roxml_add_node(tmp, 0, ROXML_ELM_NODE, "price", "24");
+ * 	roxml_commit_changes(root, "/tmp/test.xml", NULL, 1);
+ * 	return 0;
+ * }
+ * \endcode
+ * to generate the following xml bloc:
+\verbatim
+<root>
+ <!-- sample XML file -->
+ <item id="42">
+  <price> 
+   24 
+  </price>
+ </item>
+</root>
+\endverbatim
+ * or also
+ * \code
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ * 	node_t *root = roxml_add_node(NULL, 0, ROXML_ELM_NODE, "xml", NULL);
+ * 	node_t *tmp = roxml_add_node(root, 0, ROXML_CMT_NODE, NULL, "sample XML file");
+ * 	tmp = roxml_add_node(root, 0, ROXML_ELM_NODE, "item", NULL);
+ * 	roxml_add_node(tmp, 0, ROXML_ATTR_NODE, "id", "42");
+ * 	tmp = roxml_add_node(tmp, 0, ROXML_ELM_NODE, "price", "24");
+ * 	roxml_commit_changes(root, "/tmp/test.xml", NULL, 0);
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ * to generate the following xml bloc:
+\verbatim
+<root><!-- sample XML file --><item id="42"><price>24</price></item></root>
+\endverbatim
+ * the buffer variant works more or less the same way
+ * \code
+ * #include <stdio.h>
+ * #include <roxml.h>
+ *
+ * int main(void)
+ * {
+ *	int len = 0;
+ *	char * buffer = NULL;
+ *	FILE * file_out;
+ * 	node_t *root = roxml_add_node(NULL, 0, ROXML_ELM_NODE, "xml", NULL);
+ * 	node_t *tmp = roxml_add_node(root, 0, ROXML_CMT_NODE, NULL, "sample XML file");
+ * 	tmp = roxml_add_node(root, 0, ROXML_ELM_NODE, "item", NULL);
+ * 	roxml_add_node(tmp, 0, ROXML_ATTR_NODE, "id", "42");
+ * 	tmp = roxml_add_node(tmp, 0, ROXML_ELM_NODE, "price", "24");
+ *
+ * 	len = roxml_commit_changes(root, NULL, &buffer, 0);
+ *
+ *	file_out = fopen("/tmp/test.xml", "w");
+ *      fwrite(buffer, 1, len, file_out);
+ *      fclose(file_out);
+ *
+ *	roxml_close(root);
+ * 	return 0;
+ * }
+ * \endcode
+ * to generate the following xml bloc:
+\verbatim
+<root><!-- sample XML file --><item id="42"><price>24</price></item></root>
+\endverbatim
+ */
+int ROXML_API roxml_commit_changes(node_t *n, char *dest, char **buffer, int human);
+
+#endif /* ROXML_H */
diff --git a/libroxml b/libroxml
deleted file mode 160000
index 1bc90ac506b50a06ee613b139405ff47ecc83c0a..0000000000000000000000000000000000000000
--- a/libroxml
+++ /dev/null
@@ -1 +0,0 @@
-Subproject commit 1bc90ac506b50a06ee613b139405ff47ecc83c0a